Novel Porosity-Water/Binder Index for Strength Prediction of Artificially Cemented Soils
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 2
Abstract
The initial weight and volume relationships play a crucial role in determining the strength of cement-stabilized soils. Since 2007, the porosity/binder ratio has been widely utilized as a control index for stabilized soil mixtures. However, this approach does not take into account the water content used during the stabilization process, which can affect the strength of the final product. To address this issue, this paper introduces the porosity-water and binder relationship as a new index to predict the strength of artificially cemented soils. The strengths of different stabilized soils were compared based on the new index and the comprehensive results were analyzed to demonstrate the efficacy of the new index. The findings indicate that the new index is an appropriate design parameter for soil–lime, soil–cement, and geopolymerized soil mixtures; moreover, the water content was identified to have no effect on the splitting tensile strength to compressive strength ratio. The results of this study provide valuable insights on the optimization of stabilized soils and development of improved soil stabilization processes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Jair Arrieta Baldovino appreciates the support of Coordenação de Aperfeiçoamento de Pessoal de Nível Superior-Finace Code 001 and Departamento Administrativo de Ciencia, Tecnología e Innovación (COLCIENCIAS).
References
Arrieta Baldovino, J. d. J., R. L. dos Santos Izzo, É. R. da Silva, and J. Lundgren Rose. 2020. “Sustainable use of recycled-glass powder in soil stabilization.” J. Mater. Civ. Eng. 32 (5): 04020080. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003081.
Bruschi, G. J., S. T. Ferrazzo, S. F. Marques, and N. C. Consoli. 2021. “Green stabilization of bauxite tailings: mechanical study on alkali-activated materials.” J. Mater. Civ. Eng. 33 (11): 06021007. https://doi.org/10.1061/(ASCE)MT.1943-5533.000394.
Consoli, N. C., M. Bellaver Corte, and L. Festugato. 2012a. “Key parameter for tensile and compressive strength of fibre-reinforced soil–lime mixtures.” Geosynth. Int. 19 (5): 409–414. https://doi.org/10.1680/gein.12.00026.
Consoli, N. C., R. C. Cruz, M. F. Floss, and L. Festugato. 2010. “Parameters controlling tensile and compressive strength of artificially cemented sand.” J. Geotech. Geoenviron. Eng. 136 (5): 759–763. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000278.
Consoli, N. C., A. Dalla Rosa Johann, E. A. Gauer, V. R. Dos Santos, R. L. Moretto, and M. B. Corte. 2012b. “Key parameters for tensile and compressive strength of silt-lime mixtures.” Geotech. Lett. 2 (3): 81–85. https://doi.org/10.1680/geolett.12.00014.
Consoli, N. C., L. da Silva Lopes, D. Foppa, and K. S. Heineck. 2009. “Key parameters dictating strength of lime/cement-treated soils.” Proc. Inst. Civ. Eng. Geotech. Eng. 162 (2): 111–118. https://doi.org/10.1680/geng.2009.162.2.111.
Consoli, N. C., L. Festugato, H. C. S. Filho, G. D. Miguel, A. T. Neto, and D. Andreghetto. 2020. “Durability assessment of soil-pozzolan-lime blends through ultrasonic-pulse velocity test.” J. Mater. Civ. Eng. 32 (8): 04020223. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003298.
Consoli, N. C., D. Foppa, L. Festugato, and K. S. Heineck. 2007. “Key parameters for strength control of artificially cemented soils.” J. Geotech. Geoenviron. Eng. 133 (2): 197–205. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:2(197).
Consoli, N. C., P. D. M. Prietto, L. da Silva Lopes, and D. Winter. 2014. “Control factors for the long term compressive strength of lime treated sandy clay soil.” Transp. Geotech. 1 (3): 129–136. https://doi.org/10.1016/j.trgeo.2014.07.005.
Consoli, N. C., H. C. Scheuermann Filho, H. B. Leon, M. da Silva Carretta, M. B. Corte, R. E. Cordeiro, R. D. Caballero, and D. E. Lourenço. 2021. “General relationships controlling loss of mass, stiffness and strength of sustainable binders amended sand.” Transp. Geotech. 27 (Mar): 100473. https://doi.org/10.1016/j.trgeo.2020.100473.
da Rocha, C. G., A. Passuello, N. C. Consoli, R. A. Quiñónez Samaniego, and N. M. Kanazawa. 2016. “Life cycle assessment for soil stabilization dosages: A study for the Paraguayan Chaco.” J. Cleaner Prod. 139 (Dec): 309–318. https://doi.org/10.1016/j.jclepro.2016.07.219.
Diambra, A., L. Festugato, E. Ibraim, A. P. da Silva, and N. C. Consoli. 2018. “Modelling tensile/compressive strength ratio of artificially cemented clean sand.” Soils Found. 58 (1): 199–211. https://doi.org/10.1016/j.sandf.2017.11.011.
Diambra, A., E. Ibraim, A. Peccin, N. C. Consoli, and L. Festugato. 2017. “Theoretical derivation of artificially cemented granular soil strength.” J. Geotech. Geoenviron. Eng. 143 (5): 04017003. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001646.
Ekinci, A., M. Hanafi, and E. Aydin. 2020. “Strength, stiffness, and microstructure of wood-ash stabilized marine clay.” Minerals https://doi.org/10.3390/min10090796.
Festugato, L., A. P. da Silva, A. Diambra, N. C. Consoli, and E. Ibraim. 2018. “Modelling tensile/compressive strength ratio of fibre reinforced cemented soils.” Geotext. Geomembr. 46 (2): 155–165. https://doi.org/10.1016/j.geotexmem.2017.11.003.
Hanafi, M., A. Ekinci, and E. Aydin. 2020. “Triple-binder-stabilized marine deposit clay for better sustainability.” Sustainability 12 (11): 4633. https://doi.org/10.3390/su12114633.
Henzinger, C., S. A. Schuhmacher, and L. Festugato. 2018. “Applicability of the porosity/binder index to nonhomogeneous mixtures of fine-grained soil with lignite fly ash.” J. Mater. Civ. Eng. 30 (9): 06018013. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002447.
Horpibulsuk, S., N. Miura, and T. S. Nagaraj. 2003. “Assessment of strength development in cement-admixed high water content clays with Abrams’ law as a basis.” Géotechnique 53 (4): 439–444. https://doi.org/10.1680/geot.2003.53.4.439.
Moreira, E. B., J. A. Baldovino, J. L. Rose, and R. Luis dos Santos Izzo. 2019. “Effects of porosity, dry unit weight, cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures.” J. Rock Mech. Geotech. Eng. 11 (2): 369–378. https://doi.org/10.1016/j.jrmge.2018.04.015.
Rios, S., A. Viana da Fonseca, and B. A. Baudet. 2012. “Effect of the porosity/cement ratio on the compression of cemented soil.” J. Geotech. Geoenviron. Eng. 138 (11): 1422–1426. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000698.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Feb 4, 2023
Accepted: Jul 28, 2023
Published online: Nov 27, 2023
Published in print: Feb 1, 2024
Discussion open until: Apr 27, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.