Properties of Cement Mortars Subject to Varied Carbonation Treatments at Early Ages
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 12
Abstract
Carbonation of cement-based composites at early ages has attracted great interest to achieve mineral sequestration, as well as to improve the properties. In this study, carbonation of cement mortars of interest (with/without lightweight clinker and fly ash) was investigated from very early ages, with the primary purpose of promoting the proper utilization of carbonation treatment in the concrete industry. To explore the influence of carbonation conditions on the strength, water absorption, carbonation shrinkage, carbonation depth, and gas permeability of mortars at early ages, different carbonation conditions with varying temperatures, concentration, and carbonation duration were studied. Based on the obtained experimental results, it was found that the influence of carbonation on the properties of different mortar matrices tested was consistent. Improving concentration from a natural level () to could remarkably improve the compressive strength gain of mortars at early ages, and the determined strength gain of mortars with 14 days’ carbonation at ambient temperature and concentration of could reach up to 30%–50%. Further rising concentration from to was noted to significantly increase the rate of carbonation shrinkage and almost double the magnitude. Besides, the intrinsic gas permeability and water absorption of mortars could be reduced by accelerated carbonation treatment. The estimated reduction of the intrinsic gas permeability of mortars after carbonation reached approximately 80%–90%. In addition, rising carbonation temperature from ambient temperature to could efficiently improve the early-age strength gain and reduce the gas permeability of mortars in a relatively short carbonation duration (). However, overextended carbonation at appeared to compromise the strength gain at early ages.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge the financial support from the Danish Offshore Technology Centre (DTU Offshore). Part of this work also received financial support from COWIfonden (Denmark), and the lightweight clinker used in this work was provided by Leca A/S Denmark. Both are greatly acknowledged as well.
References
ACI (American Concrete Institute). 2014. Guide for structural lightweight aggregate concrete. ACI213R-14. Farmington Hills, MI: ACI.
Ahmmad, R., M. Z. Jumaat, U. J. Alengaram, S. Bahri, M. A. Rehman, and H. Bin Hashim. 2016. “Performance evaluation of palm oil clinker as coarse aggregate in high strength lightweight concrete.” J. Cleaner Prod. 112 (Mar): 566–574. https://doi.org/10.1016/j.jclepro.2015.08.043.
ASTM. 2012. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618. West Conshohocken, PA: ASTM.
ASTM. 2013. Standard test method for rate of water absorption of masonry mortars. ASTM C1403. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard guide for examination of hardened concrete using scanning electron microscopy. ASTM C1723-16. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for drying shrinkage of mortar containing hydraulic cement. ASTM C596. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test method for compressive strength of hydraulic cement mortars. ASTM C109. West Conshohocken, PA: ASTM.
Auroy, M., S. Poyet, P. Le Bescop, J. M. Torrenti, T. Charpentier, M. Moskura, and X. Bourbon. 2015. “Impact of carbonation on unsaturated water transport properties of cement-based materials.” Cem. Concr. Res. 74 (Mar): 44–58. https://doi.org/10.1016/j.cemconres.2015.04.002.
Auroy, M., S. Poyet, P. Le Bescop, J. M. Torrenti, T. Charpentier, M. Moskura, and X. Bourbon. 2018. “Comparison between natural and accelerated carbonation (3% ): Impact on mineralogy, microstructure, water retention and cracking.” Cem. Concr. Res. 109 (Sep): 64–80. https://doi.org/10.1016/j.cemconres.2018.04.012.
Boel, V., K. Audenaert, and G. De Schutter. 2008. “Gas permeability and capillary porosity of self-compacting concrete.” Mater. Struct. Constr. 41 (7): 1283–1290. https://doi.org/10.1617/s11527-007-9326-x.
Bouchaala, F., C. Payan, V. Garnier, and J. P. Balayssac. 2011. “Carbonation assessment in concrete by nonlinear ultrasound.” Cem. Concr. Res. 41 (5): 557–559. https://doi.org/10.1016/j.cemconres.2011.02.006.
Boyjoo, Y., V. K. Pareek, and J. Liu. 2014. “Synthesis of micro and nano-sized calcium carbonate particles and their applications.” J. Mater. Chem. A 2 (35): 14270–14288. https://doi.org/10.1039/C4TA02070G.
CEN (European Committee for Standardization). 2013. Tests for mechanical and physical properties of aggregates—Part 6: Determination of particle density and water absorption. EN 1097-6. Brussels, Belgium: CEN.
Chang, C. F., and J. W. Chen. 2005. “Strength and elastic modulus of carbonated concrete.” ACI Mater. J. 102 (5): 315–321. https://doi.org/10.14359/14710.
Chen, J. J., J. J. Thomas, and H. M. Jennings. 2006. “Decalcification shrinkage of cement paste.” Cem. Concr. Res. 36 (5): 801–809. https://doi.org/10.1016/j.cemconres.2005.11.003.
Chen, T., and X. Gao. 2019. “Effect of carbonation curing regime on strength and microstructure of Portland cement paste.” J. CO2 Util. 34 (Jun): 74–86. https://doi.org/10.1016/j.jcou.2019.05.034.
Chen, Z., R. Li, and J. Liu. 2021. “Preparation and properties of carbonated steel slag used in cement cementitious materials.” Constr. Build. Mater. 283 (Mar): 122667. https://doi.org/10.1016/j.conbuildmat.2021.122667.
Chi, J. M., R. Huang, and C. C. Yang. 2002. “Effects of carbonation on mechanical properties and durability of concrete using accelerated testing method.” J. Mar. Sci. Technol. 10 (1): 14–20. https://doi.org/10.51400/2709-6998.2296.
Deboucha, W., N. Sebaibi, Y. El Mendili, A. Fabien, U. J. Alengaram, N. Leklou, M. N. Hamdadou, A. Bourdot, and S. Gascoin. 2021. “Reactivity effect of calcium carbonate on the formation of carboaluminate phases in ground granulated blast furnace slag blended cements.” Sustainability 13 (11): 6504. https://doi.org/10.3390/su13116504.
De Schutter, G., and K. Audenaert. 2004. “Evaluation of water absorption of concrete as a measure for resistance against carbonation and chloride migration.” Mater. Struct. 37 (273): 591–596. https://doi.org/10.1617/14045.
Dhir, R. K., P. C. Hewlett, and Y. N. Chan. 1989. “Near surface characteristics of concrete: Intrinsic permeability.” Mag. Concr. Res. 41 (147): 87–97. https://doi.org/10.1680/macr.1989.41.147.87.
Drouet, E., S. Poyet, P. Le Bescop, J. M. Torrenti, and X. Bourbon. 2019. “Carbonation of hardened cement pastes: Influence of temperature.” Cem. Concr. Res. 115 (Feb): 445–459. https://doi.org/10.1016/j.cemconres.2018.09.019.
Escadeillas, G., J. E. Aubert, M. Segerer, and W. Prince. 2007. “Some factors affecting delayed ettringite formation in heat-cured mortars.” Cem. Concr. Res. 37 (10): 1445–1452. https://doi.org/10.1016/j.cemconres.2007.07.004.
Fang, X., D. Xuan, P. Shen, and C. S. Poon. 2021. “Fast enhancement of recycled fine aggregates properties by wet carbonation.” J. Cleaner Prod. 313 (Mar): 127867. https://doi.org/10.1016/j.jclepro.2021.127867.
Feng, B., A. K. Yong, and H. An. 2007. “Effect of various factors on the particle size of calcium carbonate formed in a precipitation process.” Mater. Sci. Eng. A 445–446 (Aug): 170–179. https://doi.org/10.1016/j.msea.2006.09.010.
Hamada, H. M., G. A. Jokhio, A. A. Al-Attar, F. M. Yahaya, K. Muthusamy, A. M. Humada, and Y. Gul. 2020. “The use of palm oil clinker as a sustainable construction material: A review.” Cem. Concr. Compos. 106 (Feb): 103447. https://doi.org/10.1016/j.cemconcomp.2019.103447.
Hamami, A. A., P. Turcry, and A. Aït-Mokhtar. 2012. “Influence of mix proportions on microstructure and gas permeability of cement pastes and mortars.” Cem. Concr. Res. 42 (2): 490–498. https://doi.org/10.1016/j.cemconres.2011.11.019.
Jang, J. G., G. M. Kim, H. J. Kim, and H. K. Lee. 2016. “Review on recent advances in utilization and sequestration technologies in cement-based materials.” Constr. Build. Mater. 127 (May): 762–773. https://doi.org/10.1016/j.conbuildmat.2016.10.017.
Justnes, H., J. Skocek, T. A. Østnor, C. J. Engelsen, and O. Skjølsvold. 2020. “Microstructural changes of hydrated cement blended with fly ash upon carbonation.” Cem. Concr. Res. 137 (Aug): 106192. https://doi.org/10.1016/j.cemconres.2020.106192.
Kaliyavaradhan, S. K., T. C. Ling, and K. H. Mo. 2020. “ sequestration of fresh concrete slurry waste: Optimization of uptake and feasible use as a potential cement binder.” J. CO2 Util. 42 (Oct): 101330. https://doi.org/10.1016/j.jcou.2020.101330.
Kangni-Foli, E., S. Poyet, P. Le Bescop, T. Charpentier, F. Bernachy-Barbé, A. Dauzères, E. L’Hôpital, and J. B. d’Espinose de Lacaillerie. 2021. “Carbonation of model cement pastes: The mineralogical origin of microstructural changes and shrinkage.” Cem. Concr. Res. 144 (Nov): 106446. https://doi.org/10.1016/j.cemconres.2021.106446.
Kawabata, Y., N. Ueda, T. Miura, and S. Multon. 2021. “The influence of restraint on the expansion of concrete due to delayed ettringite formation.” Cem. Concr. Compos. 121 (Dec): 23–26. https://doi.org/10.1016/j.cemconcomp.2021.104062.
Kjellsen, K. O., and R. J. Detwiler. 1992. “Reaction kinetics of portland cement mortars hydrated at different temperatures.” Cem. Concr. Res. 22 (1): 112–120. https://doi.org/10.1016/0008-8846(92)90141-H.
Kolias, S., and C. Georgiou. 2005. “The effect of paste volume and of water content on the strength and water absorption of concrete.” Cem. Concr. Compos. 27 (2): 211–216. https://doi.org/10.1016/j.cemconcomp.2004.02.009.
Lafhaj, Z., M. Goueygou, A. Djerbi, and M. Kaczmarek. 2006. “Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/cement ratio and water content.” Cem. Concr. Res. 36 (4): 625–633. https://doi.org/10.1016/j.cemconres.2005.11.009.
Lam, L., Y. L. Wong, and C. S. Poon. 2000. “Degree of hydration and gel/space ratio of high-volume fly ash/cement systems.” Cem. Concr. Res. 30 (5): 747–756. https://doi.org/10.1016/S0008-8846(00)00213-1.
Lekakh, S. N., C. H. Rawlins, D. G. C. Robertson, V. L. Richards, and K. D. Peaslee. 2008. “Kinetics of aqueous leaching and carbonization of steelmaking slag.” Metall. Mater. Trans. B 39 (1): 125–134. https://doi.org/10.1007/s11663-007-9112-8.
Li, L., Q. Liu, V. Dao, and M. Wu. 2023. “Dimensional change of cement paste subjected to carbonation in sequestration and utilization context: A critical review on the mechanisms.” J. CO2 Util. 70 (Jul): 102444. https://doi.org/10.1016/j.jcou.2023.102444.
Li, L., and M. Wu. 2022. “An overview of utilizing for accelerated carbonation treatment in the concrete industry.” J. CO2 Util. 60 (Feb): 102000. https://doi.org/10.1016/j.jcou.2022.102000.
Li, Y., W. Liu, F. Xing, S. Wang, L. Tang, S. Lin, and Z. Dong. 2020. “Carbonation of the synthetic calcium silicate hydrate (C─ S─ H) under different concentrations of : Chemical phases analysis and kinetics.” J. CO2 Util. 35 (Jan): 303–313. https://doi.org/10.1016/j.jcou.2019.10.001.
Liang, C., B. Pan, Z. Ma, Z. He, and Z. Duan. 2020. “Utilization of curing to enhance the properties of recycled aggregate and prepared concrete: A review.” Cem. Concr. Compos. 105 (Jul): 103446. https://doi.org/10.1016/j.cemconcomp.2019.103446.
Liu, Q., A. Singh, J. Xiao, B. Li, and V. W. Tam. 2020. “Workability and mechanical properties of mortar containing recycled sand from aerated concrete blocks and sintered clay bricks.” Resour. Conserv. Recycl. 157 (Jan): 104728. https://doi.org/10.1016/j.resconrec.2020.104728.
Liu, W., L. Teng, S. Rohani, Z. Qin, B. Zhao, C. C. Xu, S. Ren, Q. Liu, and B. Liang. 2021. “ mineral carbonation using industrial solid wastes: A review of recent developments.” Chem. Eng. J. 416 (Feb): 129093. https://doi.org/10.1016/j.cej.2021.129093.
Liu, Z., and W. Meng. 2021. “Fundamental understanding of carbonation curing and durability of carbonation-cured cement-based composites: A review.” J. CO2 Util. 44 (Nov): 101428. https://doi.org/10.1016/j.jcou.2020.101428.
Lo, T. Y., and H. Z. Cui. 2004. “Effect of porous lightweight aggregate on strength of concrete.” Mater. Lett. 58 (6): 916–919. https://doi.org/10.1016/j.matlet.2003.07.036.
Lo, T. Y., W. C. Tang, and H. Z. Cui. 2007. “The effects of aggregate properties on lightweight concrete.” Build. Environ. 42 (8): 3025–3029. https://doi.org/10.1016/j.buildenv.2005.06.031.
Lu, B., S. Drissi, J. Liu, X. Hu, B. Song, and C. Shi. 2022. “Effect of temperature on curing, compressive strength and microstructure of cement paste.” Cem. Concr. Res. 157 (Jul): 106827. https://doi.org/10.1016/j.cemconres.2022.106827.
Mo, K. H., U. J. Alengaram, and M. Z. Jumaat. 2016. “Bond properties of lightweight concrete—A review.” Constr. Build. Mater. 112 (Jun): 478–496. https://doi.org/10.1016/j.conbuildmat.2016.02.125.
Mo, L., F. Zhang, and M. Deng. 2015. “Effects of carbonation treatment on the properties of hydrated fly ash-MgO-Portland cement blends.” Constr. Build. Mater. 96 (Nov): 147–154. https://doi.org/10.1016/j.conbuildmat.2015.07.193.
Moon, E. J., and Y. C. Choi. 2019. “Carbon dioxide fixation via accelerated carbonation of cement-based materials: Potential for construction materials applications.” Constr. Build. Mater. 199 (May): 676–687. https://doi.org/10.1016/j.conbuildmat.2018.12.078.
Mueller, A., S. N. Sokolova, and V. I. Vereshagin. 2008. “Characteristics of lightweight aggregates from primary and recycled raw materials.” Constr. Build. Mater. 22 (4): 703–712. https://doi.org/10.1016/j.conbuildmat.2007.06.009.
Neves Junior, A., R. D. T. Filho, E. D. M. R. Fairbairn, and J. Dweck. 2014. “A study of the carbonation profile of cement pastes by thermogravimetry and its effect on the compressive strength.” J. Therm. Anal. Calorim. 116 (1): 69–76. https://doi.org/10.1007/s10973-013-3556-7.
Neves Junior, A., R. D. Toledo Filho, E. D. M. R. Fairbairn, and J. Dweck. 2013. “ sequestration by high initial strength Portland cement pastes.” J. Therm. Anal. Calorim. 113 (3): 1577–1584. https://doi.org/10.1007/s10973-013-3117-0.
Neville, A. M., and J. J. Brooks. 1987. Concrete technology. Essex, UK: Longman Scientific & Technical.
Ni, M., and B. D. Ratner. 2008. “Differentiating calcium carbonate polymorphs by surface analysis techniques—An XPS and TOF-SIMS study.” Surf. Interface Anal. 40 (10): 1356–1361. https://doi.org/10.1002/sia.2904.
Pan, S. Y., T. C. Chung, C. C. Ho, C. J. Hou, Y. H. Chen, and P. C. Chiang. 2017. “ mineralization and utilization using steel slag for establishing a waste-to-resource supply chain.” Sci. Rep. 7 (1): 1–11. https://doi.org/10.1038/s41598-017-17648-9.
Papadakis, V. G. 1999. “Effect of fly ash on Portland cement systems: Part I. Low-calcium fly ash.” Cem. Concr. Res. 29 (11): 1727–1736. https://doi.org/10.1016/S0008-8846(99)00153-2.
Pei, J., R. Sharma, and J. G. Jang. 2022. “Use of carbonated Portland cement clinkers as a reactive or non-reactive aggregate for the production of cement mortar.” Constr. Build. Mater. 319 (Sep): 126070. https://doi.org/10.1016/j.conbuildmat.2021.126070.
Pei, S. L., S. Y. Pan, X. Gao, Y. K. Fang, and P. C. Chiang. 2018. “Efficacy of carbonated petroleum coke fly ash as supplementary cementitious materials in cement mortars.” J. Cleaner Prod. 180 (Apr): 689–697. https://doi.org/10.1016/j.jclepro.2018.01.055.
Picandet, V., A. Khelidj, and G. Bastian. 2001. “Effect of axial compressive damage on gas permeability of ordinary and high-performance concrete.” Cem. Concr. Res. 31 (11): 1525–1532. https://doi.org/10.1016/S0008-8846(01)00546-4.
Qin, L., and X. Gao. 2019. “Properties of coal gangue-Portland cement mixture with carbonation.” Fuel 245 (Apr): 1–12. https://doi.org/10.1016/j.fuel.2019.02.067.
Qin, L., X. Gao, and T. Chen. 2019. “Influence of mineral admixtures on carbonation curing of cement paste.” Constr. Build. Mater. 212 (Jul): 653–662. https://doi.org/10.1016/j.conbuildmat.2019.04.033.
Rostami, V., Y. Shao, A. J. Boyd, and Z. He. 2012. “Microstructure of cement paste subject to early carbonation curing.” Cem. Concr. Res. 42 (1): 186–193. https://doi.org/10.1016/j.cemconres.2011.09.010.
Russell, D., P. A. M. Basheer, G. I. B. Rankin, and A. E. Long. 2001. “Effect of relative humidity and air permeability on prediction of the rate of carbonation of concrete.” Proc. Inst. Civ. Eng. Struct. Build. 6 (3): 319–326. https://doi.org/10.1680/stbu.2001.146.3.319.
Saillio, M., V. Baroghel-Bouny, S. Pradelle, M. Bertin, J. Vincent, and J. de Lacaillerie. 2021. “Cement and concrete research effect of supplementary cementitious materials on carbonation of cement pastes.” Cem. Concr. Res. 142 (Oct): 106358. https://doi.org/10.1016/j.cemconres.2021.106358.
Šavija, B., and M. Luković. 2016. “Carbonation of cement paste: Understanding, challenges, and opportunities.” Constr. Build. Mater. 117 (Jun): 285–301. https://doi.org/10.1016/j.conbuildmat.2016.04.138.
Seo, J., S. Kim, S. Park, S. J. Bae, and H. K. Lee. 2021. “Microstructural evolution and carbonation behavior of lime-slag binary binders.” Cem. Concr. Compos. 119 (Mar): 104000. https://doi.org/10.1016/j.cemconcomp.2021.104000.
Song, B., C. Shi, X. Hu, K. Ouyang, Y. Ding, and G. Ke. 2021. “Effect of early curing on the chloride transport and binding behaviors of fly ash-blended Portland cement.” Constr. Build. Mater. 288 (May): 123113. https://doi.org/10.1016/j.conbuildmat.2021.123113.
Théréné, F., E. Keita, J. Naël-Redolfi, P. Boustingorry, L. Bonafous, and N. Roussel. 2020. “Water absorption of recycled aggregates: Measurements, influence of temperature and practical consequences.” Cem. Concr. Res. 137 (Feb): 106196. https://doi.org/10.1016/j.cemconres.2020.106196.
Torres, M. L., and P. A. García-Ruiz. 2009. “Lightweight pozzolanic materials used in mortars: Evaluation of their influence on density, mechanical strength and water absorption.” Cem. Concr. Compos. 31 (2): 114–119. https://doi.org/10.1016/j.cemconcomp.2008.11.003.
Ukwattage, N. L., P. G. Ranjith, and X. Li. 2017. “Steel-making slag for mineral sequestration of carbon dioxide by accelerated carbonation.” Measurement 97 (Mar): 15–22. https://doi.org/10.1016/j.measurement.2016.10.057.
Wang, A., C. Zhang, and W. Sun. 2004. “Fly ash effects: II. The active effect of fly ash.” Cem. Concr. Res. 34 (11): 2057–2060. https://doi.org/10.1016/j.cemconres.2003.03.001.
Wang, D., T. Noguchi, and T. Nozaki. 2019a. “Increasing efficiency of carbon dioxide sequestration through high temperature carbonation of cement-based materials.” J. Cleaner Prod. 238 (Feb): 117980. https://doi.org/10.1016/j.jclepro.2019.117980.
Wang, X., W. Ni, J. Li, S. Zhang, M. Hitch, and R. Pascual. 2019b. “Carbonation of steel slag and gypsum for building materials and associated reaction mechanisms.” Cem. Concr. Res. 125 (Sep): 105893. https://doi.org/10.1016/j.cemconres.2019.105893.
Wang, X. Y. 2014. “Effect of fly ash on properties evolution of cement based materials.” Constr. Build. Mater. 69 (Oct): 32–40. https://doi.org/10.1016/j.conbuildmat.2014.07.029.
Wu, B., and G. Ye. 2017. “Development of porosity of cement paste blended with supplementary cementitious materials after carbonation.” Constr. Build. Mater. 145 (May): 52–61. https://doi.org/10.1016/j.conbuildmat.2017.03.176.
Xuan, D., B. Zhan, and C. S. Poon. 2016. “Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates.” Cem. Concr. Compos. 65 (Jan): 67–74. https://doi.org/10.1016/j.cemconcomp.2015.10.018.
Ye, H., A. Radlińska, and J. Neves. 2017. “Drying and carbonation shrinkage of cement paste containing alkalis.” Mater. Struct. 50 (2): 1–13. https://doi.org/10.1617/s11527-017-1006-x.
Yu, J., M. Lei, B. Cheng, and X. Zhao. 2004. “Effects of PAA additive and temperature on morphology of calcium carbonate particles.” J. Solid State Chem. 177 (3): 681–689. https://doi.org/10.1016/j.jssc.2003.08.017.
Zajac, M., A. Lechevallier, P. Durdzinski, F. Bullerjahn, J. Skibsted, and M. Ben Haha. 2020a. “ mineralisation of Portland cement: Towards understanding the mechanisms of enforced carbonation.” J. CO2 Util. 38 (Mar): 398–415. https://doi.org/10.1016/j.jcou.2020.02.015.
Zajac, M., J. Skocek, P. Durdzinski, F. Bullerjahn, J. Skibsted, and M. Ben Haha. 2020b. “Effect of carbonated cement paste on composite cement hydration and performance.” Cem. Concr. Res. 134 (Oct): 106090. https://doi.org/10.1016/j.cemconres.2020.106090.
Zhan, B. J., D. X. Xuan, C. S. Poon, and C. J. Shi. 2019. “Mechanism for rapid hardening of cement pastes under coupled -water curing regime.” Cem. Concr. Compos. 97 (Jan): 78–88. https://doi.org/10.1016/j.cemconcomp.2018.12.021.
Zhang, D., Z. Ghouleh, and Y. Shao. 2017. “Review on carbonation curing of cement-based materials.” J. CO2 Util. 21 (Jun): 119–131. https://doi.org/10.1016/j.jcou.2017.07.003.
Zhang, D., and K. Li. 2019. “Concrete gas permeability from different methods: Correlation analysis.” Cem. Concr. Compos. 104 (Jul): 103379. https://doi.org/10.1016/j.cemconcomp.2019.103379.
Zhang, D., and Y. Shao. 2016. “Early age carbonation curing for precast reinforced concretes.” Constr. Build. Mater. 113 (Aug): 134–143. https://doi.org/10.1016/j.conbuildmat.2016.03.048.
Zhang, J., F. Bian, Y. Zhang, Z. Fang, C. Fu, and J. Guo. 2018. “Effect of pore structures on gas permeability and chloride diffusivity of concrete.” Constr. Build. Mater. 163 (Feb): 402–413. https://doi.org/10.1016/j.conbuildmat.2017.12.111.
Zhang, R., and D. K. Panesar. 2018. “Water absorption of carbonated reactive MgO concrete and its correlation with the pore structure.” J. CO2 Util. 24 (Mar): 350–360. https://doi.org/10.1016/j.jcou.2018.01.026.
Zhao, H., H. Li, W. Bao, C. Wang, S. Li, and W. Lin. 2015. “Experimental study of enhanced phosphogypsum carbonation with ammonia under increased pressure.” J. CO2 Util. 11 (Aug): 10–19. https://doi.org/10.1016/j.jcou.2014.11.004.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 28, 2022
Accepted: May 17, 2023
Published online: Sep 28, 2023
Published in print: Dec 1, 2023
Discussion open until: Feb 28, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.