Performance Investigation and Internal-Structure Analysis of Polyurethane Bonded Mixture on Highway Steel Bridge
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 11
Abstract
This study investigated the feasibility of applying a polyurethane-bonded mixture (PUM) on the pavement overlay for construction or maintenance. Styrene butadiene styrene (SBS) asphalt and epoxy asphalt, the two most common and widely adopted mix designs for highway steel bridge pavement, were selected for a comparative study. First, the performance evaluations and failure analysis of the asphalt mixture and PUM were investigated comprehensively, in terms of low-temperature property, rutting, fatigue, and freeze-thaw resistance. The results showed that the dynamic stability of PUM was over and fatigue life was over one million cycles under 800 με. The tensile strength ratio (TSR) value was higher than 90%, which also indicated an excellent freeze-thaw resistance. Then, bond and shear strengths between the steel plate and the mixture were evaluated for the interlayer of the steel bridge pavement structure. X-ray CT scan analysis was adopted to visualize the internal structure of various mixtures, and the average void diameter of PUM was 0.569 mm. Finally, a statistical analysis was conducted for Kendall consistency and Grey correlation. This research established that PUM is a cost-effective and long-lasting solution for pavement overlay on highway steel-bridge.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge the financial support by the National Natural Science Foundation of China under Grant No. 51861145402.
References
Cai, X., Y. Zhang, L. Gao, J. Wang, and H. Peng. 2020. “Deterioration of cement asphalt pastes with polymer latexes and expansive agent under sulfate attack and wetting-drying cycles.” Eng. Fail. Anal. 109 (Jan): 104252. https://doi.org/10.1016/j.engfailanal.2019.104252.
Chen, J., X. Ma, H. Wang, P. Xie, and W. Huang. 2018a. “Experimental study on anti-icing and deicing performance of polyurethane concrete as road surface layer.” Constr. Build. Mater. 161 (Feb): 598–605. https://doi.org/10.1016/j.conbuildmat.2017.11.170.
Chen, J., X. Yin, H. Wang, and Y. Ding. 2018b. “Evaluation of durability and functional performance of porous polyurethane mixture in porous pavement.” J. Cleaner Prod. 188 (Jul): 12–19. https://doi.org/10.1016/j.jclepro.2018.03.297.
China Highway and Transportation Society. 2021. Technical guideline for modified PU concrete pavement on highway steel-bridge. T/CHTS 10033. Beijing: China Highway and Transportation Society.
Cong, L., T. Wang, Le Tan, J. Yuan, and J. Shi. 2018. “Laboratory evaluation on performance of porous polyurethane mixtures and OGFC.” Constr. Build. Mater. 169 (Apr): 436–442. https://doi.org/10.1016/j.conbuildmat.2018.02.145.
Cong, L., F. Yang, G. Guo, M. Ren, J. Shi, and Le Tan. 2019. “The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review.” Constr. Build. Mater. 225 (Nov): 1012–1025. https://doi.org/10.1016/j.conbuildmat.2019.07.213.
Cui, C., Y.-L. Xu, Q.-H. Zhang, and F.-Y. Wang. 2020. “Vehicle-induced fatigue damage prognosis of orthotropic steel decks of cable-stayed bridges.” Eng. Struct. 212 (Jun): 110509. https://doi.org/10.1016/j.engstruct.2020.110509.
Gao, J., H. Wang, J. Chen, X. Meng, and Z. You. 2019. “Laboratory evaluation on comprehensive performance of polyurethane rubber particle mixture.” Constr. Build. Mater. 224 (Nov): 29–39. https://doi.org/10.1016/j.conbuildmat.2019.07.044.
Gao, W.-B., Q.-K. Su, J.-W. Zhang, H.-B. Xie, F. Wen, F. Li, and J.-Z. Liu. 2020. “Steel bridge construction of Hong Kong–Zhuhai–Macao Bridge.” Int. J. Steel Struct. 20 (5): 1498–1508. https://doi.org/10.1007/s13296-020-00383-9.
Hong, B., G. Lu, J. Gao, and D. Wang. 2021. “Evaluation of polyurethane dense graded concrete prepared using the vacuum assisted resin transfer molding technology.” Constr. Build. Mater. 269 (Feb): 121340. https://doi.org/10.1016/j.conbuildmat.2020.121340.
Hu, Z.-X., X.-M. Hu, W.-M. Cheng, Y.-Y. Zhao, and M.-Y. Wu. 2018. “Performance optimization of one-component polyurethane healing agent for self-healing concrete.” Constr. Build. Mater. 179 (Aug): 151–159. https://doi.org/10.1016/j.conbuildmat.2018.05.199.
Li, J., F. Xiao, L. Zhang, and S. N. Amirkhanian. 2019. “Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: A review.” J. Cleaner Prod. 233 (Oct): 1182–1206. https://doi.org/10.1016/j.jclepro.2019.06.061.
Li, X., J. Li, J. Wang, J. Yuan, F. Jiang, X. Yu, and F. Xiao. 2021. “Recent applications and developments of Polyurethane materials in pavement engineering.” Constr. Build. Mater. 304 (Oct): 124639. https://doi.org/10.1016/j.conbuildmat.2021.124639.
Lu, G., P. Liu, T. Törzs, D. Wang, M. Oeser, and J. Grabe. 2020. “Numerical analysis for the influence of saturation on the base course of permeable pavement with a novel polyurethane binder.” Constr. Build. Mater. 240 (Apr): 117930. https://doi.org/10.1016/j.conbuildmat.2019.117930.
Lu, G., L. Renken, T. Li, D. Wang, H. Li, and M. Oeser. 2019. “Experimental study on the polyurethane-bound pervious mixtures in the application of permeable pavements.” Constr. Build. Mater. 202 (Mar): 838–850. https://doi.org/10.1016/j.conbuildmat.2019.01.051.
Luo, S., Z. Qian, X. Yang, and Q. Lu. 2018. “Laboratory evaluation of double-layered pavement structures for long-span steel bridge decks.” J. Mater. Civ. Eng. 30 (6), 04018111. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002291.
Ministry of Transportation of the People’s Republic of China. 2006. Specifications for design of highway asphalt pavement. JTG D50. Beijing: Ministry of Transportation of the People’s Republic of China.
Ministry of Transportation of the People’s Republic of China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E 20. Beijing: Ministry of Transportation of the People’s Republic of China.
Min, S., Y. Bi, M. Zheng, S. Chen, and J. Li. 2019. “Evaluation of a cold-mixed high-performance polyurethane mixture.” Adv. Mater. Sci. Eng. 2019 (Nov): 1507971. https://doi.org/10.1155/2019/1507971.
Mirza, J., M. A. R. Bhutta, and M. M. Tahir. 2013. “In situ performance of field-moulded joint sealants in dams.” Constr. Build. Mater. 41 (Apr): 889–896. https://doi.org/10.1016/j.conbuildmat.2012.12.033.
Soltani, M., T. B. Moghaddam, M. R. Karim, and H. Baaj. 2015. “Analysis of fatigue properties of unmodified and polyethylene terephthalate modified asphalt mixtures using response surface methodology.” Eng. Fail. Anal. 58 (Dec): 238–248. https://doi.org/10.1016/j.engfailanal.2015.09.005.
Somarathna, H. M. C. C., S. N. Raman, D. Mohotti, A. A. Mutalib, and K. H. Badri. 2018. “The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review.” Constr. Build. Mater. 190 (Nov): 995–1014. https://doi.org/10.1016/j.conbuildmat.2018.09.166.
Törzs, T., G. Lu, A. O. Monteiro, D. Wang, J. Grabe, and M. Oeser. 2019. “Hydraulic properties of polyurethane-bound permeable pavement materials considering unsaturated flow.” Constr. Build. Mater. 212 (Jul): 422–430. https://doi.org/10.1016/j.conbuildmat.2019.03.201.
Wang, D., P. Liu, Z. Leng, C. Leng, G. Lu, M. Buch, and M. Oeser. 2017a. “Suitability of PoroElastic Road Surface (PERS) for urban roads in cold regions: Mechanical and functional performance assessment.” J. Cleaner Prod. 165 (Nov): 1340–1350. https://doi.org/10.1016/j.jclepro.2017.07.228.
Wang, D., A. Schacht, Z. Leng, C. Leng, J. Kollmann, and M. Oeser. 2017b. “Effects of material composition on mechanical and acoustic performance of poroelastic road surface (PERS).” Constr. Build. Mater. 135 (Mar): 352–360. https://doi.org/10.1016/j.conbuildmat.2016.12.207.
Wang, H., P. Xie, R. Ji, and J. Gagnon. 2021. “Prediction of airfield pavement responses from surface deflections: Comparison between the traditional back calculation approach and the ANN model.” Road Mater. Pavement Des. 22 (9): 1930–1945. https://doi.org/10.1080/14680629.2020.1733638.
Xu, L., X. Hou, X. Li, and F. Xiao. 2021a. “Impact of constituent migration on colloid structure and rheological characteristics of emulsified asphalt with self-crosslinking modifiers.” Colloids Surf. A 619 (Jun): 126530. https://doi.org/10.1016/j.colsurfa.2021.126530.
Xu, L., X. Li, F. Jiang, X. Yu, J. Wang, and F. Xiao. 2022. “Thermosetting characteristics and performances of polyurethane material on airport thin-overlay.” Constr. Build. Mater. 344 (Aug): 128252. https://doi.org/10.1016/j.conbuildmat.2022.128252.
Xu, L., X. Li, Q. Zong, and F. Xiao. 2021b. “Chemical, morphological and rheological investigations of SBR/SBS modified asphalt emulsions with waterborne acrylate and polyurethane.” Constr. Build. Mater. 272 (Feb): 121972. https://doi.org/10.1016/j.conbuildmat.2020.121972.
Xu, S., G. Lu, B. Hong, X. Jiang, G. Peng, D. Wang, and M. Oeser. 2020. “Experimental investigation on the development of pore clogging in novel porous pavement based on polyurethane.” Constr. Build. Mater. 258 (Oct): 120378. https://doi.org/10.1016/j.conbuildmat.2020.120378.
Yu, S., and J. Ou. 2021. “Fatigue life prediction for orthotropic steel deck details with a nonlinear accumulative damage model under pavement temperature and traffic loading.” Eng. Fail. Anal. 126 (Aug): 105366. https://doi.org/10.1016/j.engfailanal.2021.105366.
Yuan, J., J. Wang, F. Xiao, S. Amirkhanian, J. Wang, and Z. Xu. 2017. “Impacts of multiple-polymer components on high temperature performance characteristics of airfield modified binders.” Constr. Build. Mater. 134 (Mar): 694–702. https://doi.org/10.1016/j.conbuildmat.2016.12.156.
Zhang, D., F. Ye, and J. Yuan. 2013. “Life-cycle cost analysis (LCCA) on steel bridge pavement structural composition.” Procedia Social Behav. Sci. 96 (Nov): 785–789. https://doi.org/10.1016/j.sbspro.2013.08.089.
Zhao, Z., X. Guan, F. Xiao, Z. Xie, P. Xia, and Q. Zhou. 2020. “Applications of asphalt concrete overlay on Portland cement concrete pavement.” Constr. Build. Mater. 264 (Dec): 120045. https://doi.org/10.1016/j.conbuildmat.2020.120045.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 30, 2022
Accepted: Mar 15, 2023
Published online: Aug 25, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 25, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.