Surface Microstructure of Basalt Fiber after Surface Modification and Mechanical Properties of Concrete Reinforced with Modified Basalt Fiber
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 11
Abstract
To increase the surface roughness of basalt fiber (BF) and heighten its adhesion to the concrete matrix, three types of modified solutions were prepared [nanosilica (NS) solution, -aminopropyl triethoxy silane (KH550) solution, and NS and KH550 hybrid solution] to modify the surface of BF. After treatment with the modified solutions, scanning electron microscopy, atomic force microscopy, energy dispersive spectroscopy, and Fourier transform infrared spectroscopy were used to analyze the changes in the surface microstructure of the BF. The effects of BF modified by different solutions on the mechanical properties of basalt fiber concrete (BFC) were studied by compressive strength and splitting tensile tests. The results showed that the three types of modified solutions improved the roughness of the BF surface. However, the improvements in roughness differed, with the pure NS solution being less effective. The NS and KH550 hybrid solutions exhibited the most significant modification effects, and the roughness of the BF surface increased as the NS and KH550 contents increased. BF treated with the modified solution improved the compressive and tensile strengths of the BFC. In terms of mechanical improvements, the modification effect of the pure NS solution was the worst. The NS and KH550 hybrid solutions demonstrated the best performance. The pure KH550 solution was in between the other two solutions. In general, the mechanical properties of the BFC improved with increasing NS and KH550 contents. When microstructure and macroscopic mechanical properties were comprehensively considered, the modification effect was better when NS was 5% and KH550 was 2.91%.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used in this study appear in the published article.
Acknowledgments
We are grateful to the Henan Natural Science Foundation (182300410134) for their support.
References
Afroz, M., I. Patnaikuni, and S. Venkatesan. 2017. “Chemical durability and performance of modified basalt fiber in concrete medium.” Constr. Build. Mater. 154 (Nov): 191–203. https://doi.org/10.1016/j.conbuildmat.2017.07.153.
Bao, X., F. Liu, and J. He. 2021. “Mechanical properties and water-aging resistance of glass ionomer cements reinforced with 3-aminopropyltriethoxysilane treated basalt fibers.” J. Mech. Behav. Biomed. Mater. 116 (Apr): 104369. https://doi.org/10.1016/j.jmbbm.2021.104369.
Chimeni, D. Y., V. Hirschberg, C. Dubois, and D. Rodrigue. 2018. “Rheological behavior of composites made from linear medium-density polyethylene and hemp fibers treated by surface-initiated catalytic polymerization.” Rheol. Acta 57 (6): 445–457. https://doi.org/10.1007/s00397-018-1089-5.
CS (Chinese Standard). 2011. Specification for mix proportion design of ordinary concrete, China Academy Building Sciences. JGJ 55-2011. Beijing: China Building Materials Industry Press.
CS (Chinese Standard). 2019. Standard for test methods of concrete physical and mechanical properties on ordinary concrete. GB/T 50081-2019. Beijing: China Architecture and Building Press.
Du, S., Y. Zhou, H. Sun, W. Liu, C. Luan, L. Yuan, J. Wang, P. Du, Z. Zhou, and X. Cheng. 2021. “The effect of silane surface treatment on the mechanical properties of UHPFRC.” Constr. Build. Mater. 304 (Oct): 124580. https://doi.org/10.1016/j.conbuildmat.2021.124580.
Fazeli, M., J. P. Florez, and R. A. Simão. 2019. “Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification.” Composites, Part B 163 (Apr): 207–216. https://doi.org/10.1016/j.compositesb.2018.11.048.
Guo, Y., Y. Li, S. Wang, Z.-X. Liu, B. Cai, and P.-C. Wang. 2019. “Effect of silane treatment on adhesion of adhesive-bonded carbon fiber reinforced nylon 6 composite.” Int. J. Adhes. Adhes. 91 (Jun): 102–115. https://doi.org/10.1016/j.ijadhadh.2019.03.008.
Hou, P., S. Kawashima, D. Kong, D. J. Corr, J. Qian, and S. P. Shah. 2013. “Modification effects of colloidal on cement hydration and its gel property.” Composites, Part B 45 (1): 440–448. https://doi.org/10.1016/j.compositesb.2012.05.056.
Hou, X., S. Yao, Z. Wang, C. Fang, and T. Li. 2021. “Enhancement of the mechanical properties of polylactic acid/basalt fiber composites via in-situ assembling silica nanospheres on the interface.” J. Mater. Sci. Technol. 84 (Sep): 182–190. https://doi.org/10.1016/j.jmst.2021.02.001.
Iorio, M., M. L. Santarelli, G. González-Gaitano, and J. González-Benito. 2018. “Surface modification and characterization of basalt fibers as potential reinforcement of concretes.” Appl. Surf. Sci. 427 (Jan): 1248–1256. https://doi.org/10.1016/j.apsusc.2017.08.196.
Jia, H., C. Liu, Y. Qiao, Y. Zhang, X. Dang, Y. Chen, and X. Jian. 2021. “Enhanced interfacial and mechanical properties of basalt fiber reinforced poly(aryl ether nitrile ketone) composites by amino-silane coupling agents.” Polymer 230 (Sep): 124028. https://doi.org/10.1016/j.polymer.2021.124028.
Khosravi, H., and R. Eslami-Farsani. 2016. “Enhanced mechanical properties of unidirectional basalt fiber/epoxy composites using silane-modified Na+-montmorillonite nanoclay.” Polym. Test. 55 (Oct): 135–142. https://doi.org/10.1016/j.polymertesting.2016.08.011.
Kim, M. T., K. Y. Rhee, S. J. Park, and D. Hui. 2012. “Effects of silane-modified carbon nanotubes on flexural and fracture behaviors of carbon nanotube-modified epoxy/basalt composites.” Composites, Part B 43 (5): 2298–2302. https://doi.org/10.1016/j.compositesb.2011.12.007.
Lee, J. H., K. Y. Rhee, and S. J. Park. 2010. “The tensile and thermal properties of modified CNT-reinforced basalt/epoxy composites.” Mater. Sci. Eng., A 527 (26): 6838–6843. https://doi.org/10.1016/j.msea.2010.07.080.
Lee, S.-O., K. Y. Rhee, and S.-J. Park. 2015. “Influence of chemical surface treatment of basalt fibers on interlaminar shear strength and fracture toughness of epoxy-based composites.” J. Ind. Eng. Chem. 32 (Dec): 153–156. https://doi.org/10.1016/j.jiec.2015.08.009.
Li, J., J. Si, C. Zuo, J. Wang, S. Chen, P. Zhang, W. Li, Q. Gao, C. Wei, and S. Miao. 2022. “One-step drawing of continuous basalt fibers coated with palladium nanoparticles and used as catalysts in benzyl alcohol oxidation.” Colloids Surf., A 639 (Apr): 128342. https://doi.org/10.1016/j.colsurfa.2022.128342.
Liu, S., J. Wu, G. Wu, and X. Yin. 2020. “Surface modification of basalt fiber using nano-SiO2.” J. Text. Res. 41 (12): 37–41. https://doi.org/10.13475/j.fzxb.20200401105.
Monaldo, E., F. Nerilli, and G. Vairo. 2019. “Basalt-based fiber-reinforced materials and structural applications in civil engineering.” Compos. Struct. 214 (Apr): 246–263. https://doi.org/10.1016/j.compstruct.2019.02.002.
Vinay, S. S., M. R. Sanjay, S. Siengchin, and C. V. Venkatesh. 2021. “Effect of nanofillers in basalt/epoxy composites: Mechanical and tribological properties.” Polym. Compos. 42 (4): 1727–1740. https://doi.org/10.1002/pc.25927.
Xiang, Y., Y. Xie, and G. Long. 2018. “Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: From macro-mechanical performance to micro-interfacial mechanism.” Constr. Build. Mater. 179 (Aug): 107–116. https://doi.org/10.1016/j.conbuildmat.2018.05.192.
Yu, S., K. H. Oh, and S. H. Hong. 2019a. “Enhancement of the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites by improving interfacial bonding strength through plasma-polymerization.” Compos. Sci. Technol. 182 (Sep): 107756. https://doi.org/10.1016/j.compscitech.2019.107756.
Yu, S., K. H. Oh, J. Y. Hwang, and S. H. Hong. 2019b. “The effect of amino-silane coupling agents having different molecular structures on the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites.” Composites, Part B 163 (Apr): 511–521. https://doi.org/10.1016/j.compositesb.2018.12.148.
Zhang, W., X. Zou, F. Wei, H. Wang, G. Zhang, Y. Huang, and Y. Zhang. 2019. “Grafting nanoparticles on polyvinyl alcohol fibers to enhance the interfacial bonding strength with cement.” Composites, Part B 162 (Apr): 500–507. https://doi.org/10.1016/j.compositesb.2019.01.034.
Zheng, Y., D. Sun, Q. Feng, and Z. Peng. 2022. “Nano- modified basalt fiber for enhancing mechanical properties of oil well cement.” Colloids Surf., A 648 (Sep): 128900. https://doi.org/10.1016/j.colsurfa.2022.128900.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 3, 2022
Accepted: Apr 4, 2023
Published online: Aug 29, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 29, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.