Influence of SBS on the Aging Properties of High-Content Terminal Blend Rubber Modified Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 8
Abstract
The goal of this study was to investigate the effect of styrene-butadiene-styrene (SBS) polymer on the aging properties of high-content terminal blend rubber modified asphalt (HCTBMA). All asphalt was tested for chemo-rheological properties using an attenuated total reflection–Fourier transform infrared spectroscopy (ATR-FTIR) test, temperature sweep test, frequency sweep tests, and multiple stress creep recovery (MSCR) test. According to ATR-FTIR observations, SBS can retard the oxidation effect of HCTBMA during short-term aging, but its inhibitory effect is reduced during long-term aging. Furthermore, aging aggravates the degree of desulfurization of crumb rubber in HCTBMA as the SBS content increases. Compared with HCTBMA, neat asphalt has a lower elasticity at high temperatures and a higher elasticity at low temperatures. The addition of SBS to HCTBMA improves the elasticity of the material. The elasticity of HCTBMA decreases and then increases after aging, and SBS can reduce the aging degree of HCTBMA after aging. Moreover, based on Pearson correlation analysis, the correlation between the desulfurization of rubber and the degradation of polybutadiene in HCTBMA during aging is high.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Thank you for financial support from the China Scholarship Council (CSC No. 202106260114).
References
AASHTO. 2014. Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. AASHTO M 332-14. Washington, DC: AASHTO.
Abdelrahman, M. 2006. “Controlling performance of crumb rubber-modified binders through addition of polymer modifiers.” Transp. Res. Rec. 1962 (1): 64–70. https://doi.org/10.1177/0361198106196200108.
Al-Mansob, R. A., et al. 2022. “Effect of carbon nanofibers on physical, adhesion and rheological properties of liquid epoxidized natural rubber modified asphalt.” Materials (Basel) 15 (11): 3870. https://doi.org/10.3390/ma15113870.
Al-Sabaeei, A. M., A. Al-Fakih, S. Noura, E. Yaghoubi, W. Alaloul, R. A. Al-Mansob, M. Imran Khan, and N. S. Aliyu Yaro. 2022. “Utilization of palm oil and its by-products in bio-asphalt and bio-concrete mixtures: A review.” Constr. Build. Mater. 337 (Jun): 127552. https://doi.org/10.1016/j.conbuildmat.2022.127552.
Apeagyei, A. K. 2011. “Laboratory evaluation of antioxidants for asphalt binders.” Constr. Build. Mater. 25 (1): 47–53. https://doi.org/10.1016/j.conbuildmat.2010.06.058.
Arega, Z., A. Bhasin, A. Motamed, and F. Turner. 2011. “Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents.” J. Mater. Civ. Eng. 23 (10): 1453–1459. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000315.
Asli, H., E. Ahmadinia, M. Zargar, and M. R. Karim. 2012. “Investigation on physical properties of waste cooking oil—Rejuvenated bitumen binder.” Constr. Build. Mater. 37 (Dec): 398–405. https://doi.org/10.1016/j.conbuildmat.2012.07.042.
Bressi, S., N. Fiorentini, J. Huang, and M. Losa. 2019. “Crumb rubber modifier in road asphalt pavements: State of the art and statistics.” Coatings 9 (6): 384. https://doi.org/10.3390/coatings9060384.
D’Angelo, J. A. 2009. “The relationship of the MSCR test to rutting.” Supplement, Road Mater. Pavement Des. 10 (S1): 61–80. https://doi.org/10.1080/14680629.2009.9690236.
Dong, R., J. Li, and S. Wang. 2011. “Laboratory evaluation of pre-devulcanized crumb rubber–modified asphalt as a binder in hot-mix asphalt.” J. Mater. Civ. Eng. 23 (8): 1138–1144. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000277.
Han, L., M. Zheng, and C. Wang. 2016. “Current status and development of terminal blend tyre rubber modified asphalt.” Constr. Build. Mater. 128 (Dec): 399–409. https://doi.org/10.1016/j.conbuildmat.2016.10.080.
Jones, D., J. T. Harvey, and C. L. Monismith. 2008. Reflective cracking study: Summary report. Berkeley, CA: Univ. of California Pavement Research Center.
Li, M., L. Liu, C. Xing, L. Liu, and H. Wang. 2021. “Influence of rejuvenator preheating temperature and recycled mixture’s curing time on performance of hot recycled mixtures.” Constr. Build. Mater. 295 (Aug): 123616. https://doi.org/10.1016/j.conbuildmat.2021.123616.
Lin, P., W. Huang, N. Tang, and F. Xiao. 2017. “Performance characteristics of terminal blend rubberized asphalt with SBS and polyphosphoric acid.” Constr. Build. Mater. 141 (6): 171–182. https://doi.org/10.1016/j.conbuildmat.2017.02.138.
Liu, L., M. Li, and Q. Lu. 2020. “Two-step mixing process elaboration of the hot-mix asphalt mixture based on surface energy theory.” J. Mater. Civ. Eng. 32 (10): 04020301. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003400.
Lo Presti, D. 2013. “Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review.” Constr. Build. Mater. 49 (Dec): 863–881. https://doi.org/10.1016/j.conbuildmat.2013.09.007.
Lo Presti, D., G. Airey, and P. Partal. 2012. “Manufacturing terminal and field bitumen-tyre rubber blends: The importance of processing conditions.” Procedia-Social Behav. Sci. 53 (Oct): 485–494. https://doi.org/10.1016/j.sbspro.2012.09.899.
Ministry of Transport of the People’s Republic of China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011. Beijing: Ministry of Transport of the People’s Republic of China.
Nazzal, M. D., M. T. Iqbal, S. S. Kim, A. Abbas, M. T. Quasema, and W. Mogawer. 2017. “Evaluating the mechanical properties of terminal blend tire rubber mixtures incorporating RAP.” Constr. Build. Mater. 138 (May): 427–433. https://doi.org/10.1016/j.conbuildmat.2017.01.102.
Picado-Santos, L. G., S. D. Capitão, and J. M. C. Neves. 2020. “Crumb rubber asphalt mixtures: A literature review.” Constr. Build. Mater. 247 (Jun): 118577. https://doi.org/10.1016/j.conbuildmat.2020.118577.
Qi, X., A. Shenoy, G. Al-Khateeb, T. Arnold, N. Gibson, J. Youtcheff, and T. Harman. 2006. “Laboratory characterization and full-scale accelerated performance testing of crumb rubber asphalts and other modified asphalt systems.” In Proc., Asphalt Rubber 2006 Conf., 39–65. Milton Park, UK: Taylor&Francis.
Safari, F., J. Lee, L. A. H. Do Nascimento, C. Hintz, and Y. R. Kim. 2014. “Implications of warm-mix asphalt on long term oxidative aging and fatigue performance of asphalt binders and mixtures.” Asphalt Paving Technol. 83 (Jan): 143–169.
Santucci, L. 2009. “Rubber roads: Waste tires find a home.” Pavement Technol. Update 1 (2): 1–12.
Shen, J., B. Li, and Z. Xie. 2017. “Interaction between crumb rubber modifier (CRM) and asphalt binder in dry process.” Constr. Build. Mater. 149 (Jul): 202–206. https://doi.org/10.1016/j.conbuildmat.2017.04.191.
Sienkiewicz, M., K. Borzędowska-Labuda, A. Wojtkiewicz, and H. Janik. 2017. “Development of methods improving storage stability of bitumen modified with ground tire rubber: A review.” Fuel Process. Technol. 159 (May): 272–279. https://doi.org/10.1016/j.fuproc.2017.01.049.
Stimilli, A., G. Ferrotti, C. Conti, G. Tosi, and F. Canestrari. 2014. “Chemical and rheological analysis of modified bitumens blended with ‘artificial reclaimed bitumen.’” Constr. Build. Mater. 63 (Jul): 1–10. https://doi.org/10.1016/j.conbuildmat.2014.03.047.
Tang, N., W. Huang, J. Hu, and F. Xiao. 2018. “Rheological characterisation of terminal blend rubberised asphalt binder containing polymeric additive and sulphur.” Road Mater. Pavement Des. 19 (6): 1288–1300. https://doi.org/10.1080/14680629.2017.1305436.
Tang, N., W. Huang, and F. Xiao. 2016. “Chemical and rheological investigation of high-cured crumb rubber-modified asphalt.” Constr. Build. Mater. 123 (Oct): 847–854. https://doi.org/10.1016/j.conbuildmat.2016.07.131.
Wang, H., Z. You, J. Mills-Beale, and P. Hao. 2012. “Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber.” Constr. Build. Mater. 26 (1): 583–590. https://doi.org/10.1016/j.conbuildmat.2011.06.061.
Wang, S., and W. Huang. 2021. “Investigation of aging behavior of terminal blend rubberized asphalt with SBS polymer.” Constr. Build. Mater. 267 (1): 120870. https://doi.org/10.1016/j.conbuildmat.2020.120870.
Wang, S., W. Huang, and A. Kang. 2021a. “Evaluation of aging characteristics of high-viscosity asphalt: Rheological properties, rutting resistance, temperature sensitivity, homogeneity, and chemical composition.” J. Mater. Civ. Eng. 33 (7): 04021149. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003777.
Wang, S., W. Huang, and A. Kang. 2021b. “Laboratory evaluation of the properties of high-cured crumb rubber modified asphalt containing sulfur and polymer after the oxidative aging procedure.” Constr. Build. Mater. 304 (8): 124611. https://doi.org/10.1016/j.conbuildmat.2021.124611.
Wang, S., W. Huang, and P. Lin. 2022a. “Low-temperature and fatigue characteristics of degraded crumb rubber–modified bitumen before and after aging.” J. Mater. Civ. Eng. 34 (3): 04021493. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004131.
Wang, S., W. Huang, P. Lin, Z. Wu, C. Kou, and B. Wu. 2021c. “Chemical, physical, and rheological evaluation of aging behaviors of terminal blend rubberized asphalt binder.” J. Mater. Civ. Eng. 33 (11): 04021302. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003931.
Wang, S., W. Huang, X. Liu, and P. Lin. 2022b. “Influence of high content crumb rubber and different preparation methods on properties of asphalt under different aging conditions: Chemical properties, rheological properties, and fatigue performance.” Constr. Build. Mater. 327 (4): 126937. https://doi.org/10.1016/j.conbuildmat.2022.126937.
Wang, S., W. Huang, Q. Lv, C. Yan, P. Lin, and M. Zheng. 2020. “Influence of different high viscosity modifiers on the aging behaviors of SBSMA.” Constr. Build. Mater. 253 (8): 119214. https://doi.org/10.1016/j.conbuildmat.2020.119214.
Wang, T., F. Xiao, S. Amirkhanian, W. Huang, and M. Zheng. 2017. “A review on low temperature performances of rubberized asphalt materials.” Constr. Build. Mater. 145 (Aug): 483–505. https://doi.org/10.1016/j.conbuildmat.2017.04.031.
Xing, C., W. Jiang, M. Li, M. Wang, J. Xiao, and Z. Xu. 2022. “Application of atomic force microscopy in bitumen materials at the nanoscale: A review.” Constr. Build. Mater. 342 (Aug): 128059. https://doi.org/10.1016/j.conbuildmat.2022.128059.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 28, 2022
Accepted: Jan 23, 2023
Published online: May 31, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 31, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.