Comparative Life-Cycle Assessment of Fast-Curing Methods for Dry-Mix and Wet-Mix Cement Pastes
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 8
Abstract
In the precast concrete industry, steam curing is commonly used to accelerate early-stage strength development. Recently, curing also claims to offer advantages, including mitigating the burden and anticipating fast curing for cementitious materials. However, to the best of our knowledge, the environmental impacts of these fast-curing methods, compared with standard curing methods, have not been critically justified yet. In this study, a comparative evaluation for both dry-mix and wet-mix cement pastes adopting different curing methods was performed by life-cycle assessment (LCA), which is a commonly used evaluation method for the sustainability of concrete. The environmental impacts of each group, including global warming potential (GWP), ecosystem quality potential (EQP), and human health potential (HHP), were quantified. According to the results, adopting both or steam curing could reduce greenhouse gas (GHG) emissions by 20%–50% concerning the standard curing for both dry-mix and wet-mix cement pastes. Instead of purified gas, adopting flue gas for curing could further reduce GHG emissions by up to 80%. Comparing the GWP/strength ratio over the investigated times, the curing method exhibited the highest environmental benefits in the first 3 days of curing. Moreover, the use of renewable energy sources and flue gas carbonation will significantly reduce the environmental impact of and other GHG and add to the sustainability aspect by utilizing renewable resources and waste.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by National Natural Science Foundation of China (NSFC) (Grant No. 52078202).
References
AhShaikh, F. U., P. Nath, A. Hosan, M. John, and W. K. Biswas. 2019. “Sustainability assessment of recycled aggregates concrete mixes containing industrial by-products.” Mater. Today Sustainability 5 (Sep): 100013. https://doi.org/10.1016/j.mtsust.2019.100013.
Bentz, D. P., P. Lura, and J. W. Roberts. 2005. “Mixture proportioning for internal curing.” Concr. Int. 27 (2): 35–40.
El-Hassan, H., Y. Shao, and Z. Ghouleh. 2013a. “Effect of initial curing on carbonation of lightweight concrete masonry units.” ACI Mater. J. 110 (4): 441–450.
El-Hassan, H., Y. Shao, and Z. Ghouleh. 2013b. “Reaction products in carbonation-cured lightweight concrete.” J. Mater. Civ. Eng. 25 (6): 799–809. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000638.
Fernández, B. M., S. Simons, C. Hills, and P. Carey. 2004. “A review of accelerated carbonation technology in the treatment of cement-based materials and sequestration of .” J. Hazard. Mater. 112 (3): 193–205. https://doi.org/10.1016/j.jhazmat.2004.04.019.
Gallucci, E., X. Zhang, and K. L. Scrivener. 2013. “Effect of temperature on the microstructure of calcium silicate hydrate (C─ S─ H).” Cem. Concr. Res. 53 (Nov): 185–195. https://doi.org/10.1016/j.cemconres.2013.06.008.
Goodbrake, C., J. Young, and R. Berger. 1979. “Reaction of hydraulic calcium silicates with carbon dioxide and water.” J. Am. Ceram. Soc. 62 (9–10): 488–491. https://doi.org/10.1111/j.1151-2916.1979.tb19112.x.
He, Z., S. Wang, M. Mahoutian, and Y. Shao. 2020. “Flue gas carbonation of cement-based building products.” J. Util. 37 (Apr): 309–319. https://doi.org/10.1016/j.jcou.2020.01.001.
Heede, P. V. D., and N. D. Belie. 2012. “Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations.” Cem. Concr. Compos. 34 (4): 431–442. https://doi.org/10.1016/j.cemconcomp.2012.01.004.
Huijbregts, M. A. J., Z. J. N. Steinmann, P. M. F. Elshout, G. Stam, F. Verones, M. Vieira, M. Zijp, A. Hollander, R. van Zelm, and R. elm. 2017. “ReCiPe2016: A harmonised life cycle impact assessment method at midpoint and endpoint level.” Int. J. Life Cycle Assess. 22 (2): 138–147. https://doi.org/10.1007/s11367-016-1246-y.
IPCC (Intergovernmental Panel on Climate Change). 2013. Climate change 2013: The physical science basis. Contribution of working group I to the fifth assessment report of the intergovernmental panel on climate change. Cambridge, UK: Cambridge University Press.
IRNEA (International Renewable Energy Agency). 2020. Renewable power generation costs in 2020. Abu Dhabi, UAE: IRNEA.
ISO. 2006a. Environmental management—Life cycle assessment—Principles and framework. ISO 14040. Geneva: ISO.
ISO. 2006b. Environmental management—Life cycle assessment—Requirements and guidelines. ISO 14044. Geneva: ISO.
Joos, F., et al. 2013. “Carbon dioxide and climate impulse response functions for the computation of greenhouse gas metrics: A multi-model analysis.” Atmos. Chem. Phys. 13 (5): 2793–2825. https://doi.org/10.5194/acp-13-2793-2013.
Kurda, R., J. Brito, and J. D. Silvestre. 2020. “A comparative study of the mechanical and life cycle assessment of high-content fly ash and recycled aggregates concrete.” J. Build. Eng. 29 (May): 101173. https://doi.org/10.1016/j.jobe.2020.101173.
Li, L., Y. Jiang, S. Y. Pan, and T. C. Ling. 2021. “Comparative life cycle assessment to maximize sequestration of steel slag products.” Constr. Build. Mater. 298 (6): 123876. https://doi.org/10.1016/j.conbuildmat.2021.123876.
Li, L., T. C. Ling, and S. Y. Pan. 2022. “Environmental benefit assessment of steel slag utilization and carbonation: A systematic review.” Sci. Total Environ. 806 (Part 1): 150280. https://doi.org/10.1016/j.scitotenv.2021.150280.
Li, X., and T. C. Ling. 2020. “Instant curing for dry-mix pressed cement pastes: Consideration of concentrations coupled with further water curing.” J. Util. 38 (May): 348–354. https://doi.org/10.1016/j.jcou.2020.02.012.
Licht, S., X. Liu, G. Licht, X. Wang, A. Swesi, and Y. Chan. 2019. “Amplified reduction of greenhouse gas emissions with C2CNT carbon nanotube composites.” Mater. Today Sustainability 6 (Dec): 100023. https://doi.org/10.1016/j.mtsust.2019.100023.
Liu, B., Y. Xie, S. Zhou, and J. Li. 2001. “Some factors affecting early compressive strength of steam-curing concrete with ultrafine fly ash.” Cem. Concr. Res. 31 (10): 1455–1458. https://doi.org/10.1016/S0008-8846(01)00559-2.
Marchand, J., H. Hornain, S. Diamond, M. Pigeon, and H. Guiraud. 1996. “The microstructure of dry concrete products.” Cem. Concr. Res. 26 (3): 427–438. https://doi.org/10.1016/S0008-8846(96)85030-7.
Monkman, S., and M. MacDonald. 2016. “Carbon dioxide upcycling into industrially produced concrete blocks.” Constr. Build. Mater. 124 (Oct): 127–132. https://doi.org/10.1016/j.conbuildmat.2016.07.046.
Monkman, S., M. MacDonald, R. D. Hooton, and P. Sandberg. 2016. “Properties and durability of concrete produced using as an accelerating admixture.” Cem. Concr. Compos. 74 (Nov): 218–224. https://doi.org/10.1016/j.cemconcomp.2016.10.007.
Monteiro, P., S. Miller, and A. Horvath. 2017. “Towards sustainable concrete.” Nat. Mater. 16 (7): 698–699. https://doi.org/10.1038/nmat4930.
Mostafavi, S., and Z. Joneidi. 2021. “Thermal model of precast concrete curing process: Minimizing energy consumption.” Math. Comput. Simul. 191 (Jan): 82–94. https://doi.org/10.1016/j.matcom.2021.07.027.
Pan, S. Y., Y. H. Chen, C. D. Chen, A. L. Shen, M. Lin, and P. C. Chiang. 2015. “High-gravity carbonation process for enhancing fixation and utilization exemplified by the steelmaking Industry.” Environ. Sci. Technol. 49 (20): 12380–12387. https://doi.org/10.1021/acs.est.5b02210.
Petek Gursel, A., E. Masanet, A. Horvath, and A. Stadel. 2014. “Life-cycle inventory analysis of concrete production: A critical review.” Cem. Concr. Compos. 51 (Aug): 38–48. https://doi.org/10.1016/j.cemconcomp.2014.03.005.
Raheem, A. A., A. A. Soyingbe, and A. J. Emenike. 2013. “Effect of curing methods on density and compressive strength of concrete.” Int. J. Appl. Sci. Technol. 3 (4): 55–64.
Shao, Y., and A. Z. Morshed. 2015. “Early carbonation for hollow-core concrete slab curing and carbon dioxide recycling.” Mater. Struct. 48 (1–2): 307–319. https://doi.org/10.1617/s11527-013-0185-3.
Shao, Y. X., X. D. Zhou, and S. Monkman. 2006. “A new sequestration process via concrete products production.” In Proc., 2006 IEEE EIC Climate Change Technology Conf., 1–6. New York: IEEE.
Shi, C., F. He, and Y. Wu. 2012a. “Effect of pre-conditioning on curing of lightweight concrete blocks mixtures.” Constr. Build. Mater. 26 (1): 257–267. https://doi.org/10.1016/j.conbuildmat.2011.06.020.
Shi, C., P. He, Z. Tu, and Z. Cao. 2014. “Effect of pre-conditioning on process and microstructure of carbon dioxide cured concrete.” [In Chinese.] J. Chin. Ceram. Soc. 42 (8): 996–1004. https://doi.org/10.7521/j.issn.04545648.2014.08.07.
Shi, C., D. Wang, F. He, and M. Liu. 2012b. “Weathering properties of -cured concrete blocks.” Resour. Conserv. Recycl. 65 (65): 11–17. https://doi.org/10.1016/j.resconrec.2012.04.005.
Shi, C., and Y. Wu. 2009. “ curing of concrete blocks.” Concr. Int. 3 (Jan): 39–43.
Shi, J., B. Liu, F. Zhou, S. Shen, J. Dai, R. Ji, and J. Tan. 2020. “Heat damage of concrete surfaces under steam curing and improvement measures.” Constr. Build. Mater. 252 (Aug): 119104. https://doi.org/10.1016/j.conbuildmat.2020.119104.
Singh, M., K. Choudhary, A. Srivastava, K. S. Sangwan, and D. Bhunia. 2017. “A study on environmental and economic impacts of using waste marble powder in concrete.” J. Build. Eng. 13 (Sep): 87–95. https://doi.org/10.1016/j.jobe.2017.07.009.
Vieira, D. R., J. L. Calmon, and F. Z. Coelho. 2016. “Life cycle assessment (LCA) applied to the manufacturing of common and ecological concrete: A review.” Constr. Build. Mater. 124 (Oct): 656–666. https://doi.org/10.1016/j.conbuildmat.2016.07.125.
Wernet, G., C. Bauer, B. Steubing, J. Reinhard, E. Moreno-Ruiz, and B. Weidema. 2016. “The ecoinvent database version 3 (part I): Overview and methodology.” Int. J. Life Cycle Assess. 21 (Apr): 1218–1230. https://doi.org/10.1007.s11367-016-1087-8.
Xu, R., and C. M. Li Shilong. 1985. “The energy consumption of steam curing process and saving measures.” In Vol. 2 of Proc., 1985 Beijing Int. Symp. on Cement and Concrete. Beijing: Suzhou Concrete and Cement Products Research Institute, State Administration of Building Materials Industry.
Xuan, D., B. Zhan, C. S. Poon, and W. Zheng. 2016. “Carbon dioxide sequestration of concrete slurry waste and its valorisation in construction products.” Constr. Build. Mater. 113 (15): 664–672. https://doi.org/10.1016/j.conbuildmat.2016.03.109.
Yan, H., J. Zhang, Y. Zhao, and C. Zheng. 2013. “ Sequestration from flue gas by direct aqueous mineral carbonation of wollastonite.” Sci. China Technol. Sci. 56 (9): 2219–2227. https://doi.org/10.1007/s11431-013-5318-y.
Yang, S., H. Cui, and C. S. Poon. 2020. “Comparison of the mechanically compacted dry-mix and ordinary vibrated wet-mix glass concretes after exposure to elevated temperatures.” Cem. Concr. Compos. 114 (Nov): 103720. https://doi.org/10.1016/j.cemconcomp.2020.103720.
Yazici, H., S. Aydin, H. Yiǧiter, and B. Baradan. 2005. “Effect of steam curing on class C high-volume fly ash concrete mixtures.” Cem. Concr. Res. 35 (6): 1122–1127. https://doi.org.10.1016/j.cemconres.2004.08.011.
Zhan, B. J., C. S. Poon, and C. J. Shi. 2016a. “Materials characteristics affecting curing of concrete blocks containing recycled aggregates.” Cem. Concr. Compos. 67 (Mar): 50–59. https://doi.org/10.1016/j.cemconcomp.2015.12.003.
Zhan, B. J., D. X. Xuan, C. S. Poon, and C. J. Shi. 2016b. “Effect of curing parameters on curing of concrete blocks containing recycled aggregates.” Cem. Concr. Compos. 71 (Aug): 122–130. https://doi.org/10.1016/j.cemconcomp.2016.05.002.
Zou, P., Q. Chen, Y. Yu, Q. Xia, and C. Kang. 2017. “Electricity markets evolution with the changing generation mix: An empirical analysis based on China 2050 high renewable energy penetration roadmap.” Appl. Energy 185 (Part 1): 56–67. https://doi.org/10.1016/j.apenergy.2016.10.061.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 7, 2021
Accepted: Oct 3, 2022
Published online: May 24, 2023
Published in print: Aug 1, 2023
Discussion open until: Oct 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.