Simulation Calculation and Analysis of Connate Water Convection on Steam Chamber Expansion in Steam-Assisted Gravity-Drainage Process
Publication: Journal of Energy Engineering
Volume 149, Issue 4
Abstract
Steam-assisted-gravity-drainage (SAGD) is a widely employed method to enhance heavy oil production and efficiency, and the key to ensuring its steady operation is the maintenance of a steam chamber. Heat conduction and convection of steam to connate water are essential factors in the heat transfer process. In this paper, we developed a novel analytical model to investigate the heat transfer process on the boundary of the steam chamber, driven by the pressure difference between the injected steam and the original reservoir. Both conduction and convection are considered in this new model, and the calculated results are in good agreement with the simulated data by using CMG-STARS. After model validation, the effects of physical properties and operating conditions (relative permeability, initial water saturation, and steam temperature) on the heat transfer process are investigated. The results reveal that connate water saturation plays a large role than the steam temperature in conductive heat flux; low saturation leads to more efficient crude oil exploitation. This work provides new insights into the recovery mechanisms of a SAGD process.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to thank Project No. 51874333 supported by the National Natural Science Foundation of China.
References
Birrell, G. 2001. “Heat transfer ahead of a SAGD steam chamber, A study of thermocouple data from phase B of the underground test facility (Dover project).” In Proc., SPE Annual Technical Conf. and Exhibition. Richardson, TX: OnePetro.
Butler, R. 1985. “A new approach to the modelling of steam-assisted gravity drainage.” J. Can. Pet. Technol. 24 (3): 42–51. https://doi.org/10.2118/85-03-01.
Butler, R. 1987. “Rise of interfering steam chambers.” J. Can. Pet. Technol. 26 (3): 70–74. https://doi.org/10.2118/87-03-07.
Butler, R., and D. Stephens. 1981. “The gravity drainage of steam-heated heavy oil to parallel horizontal wells.” J. Can. Pet. Technol. 20 (2): 90–96. https://doi.org/10.2118/81-02-07.
Butler, R. M. 1994. “Steam-assisted gravity drainage: Concept, development, performance and future.” J. Can. Pet. Technol. 33 (2): 44–50. https://doi.org/10.2118/94-02-05.
Edmunds, N. 2000. “Investigation of SAGD steam trap control in two and three dimensions.” J. Can. Pet. Technol. 39 (1): 1–13. https://doi.org/10.2118/00-01-02.
Fan, J., B. Jin, J. Yang, and X. Fan. 2019. “The flue gas-solvent assisted steam assisted gravity drainage studies: Experiments and numerical simulation in extra-heavy oil reservoirs.” Energy Sources Part A 2019 (Oct): 1–17. https://doi.org/10.1080/15567036.2019.1686552.
Fan, J., and X. Li. 2016. “Research on the heat transfer model of the front edge of the steam cavity for steam-assisted gravity drainage.” Sci. Technol. Eng. 16 (3): 42–47.
Farouq-Ali, S. 1997. “Is there life after SAGD?” J. Can. Pet. Technol. 36 (6): 20–23. https://doi.org/10.2118/97-06-DAS.
Hs, C., and J. Jaeger. 1959. Conduction of heat in solids. Oxford, UK: Clarendon Press.
Irani, M., and I. Gates. 2013. “Understanding the convection heat-transfer mechanism in the steam-assisted-gravity-drainage process.” SPE J. 18 (6): 1202–1216. https://doi.org/10.2118/167258-PA.
Irani, M., and S. Ghannadi. 2013. “Understanding the heat-transfer mechanism in the steam-assisted gravity-drainage (SAGD) process and comparing the conduction and convection flux in bitumen reservoirs.” SPE J. 18 (1): 134–145. https://doi.org/10.2118/163079-PA.
Ito, Y., and T. Hirata. 1999. “Numerical simulation study of a well in the jacos hangingstone steam pilot project near fort mcmurray.” J. Can. Pet. Technol. 38 (13): 1–11. https://doi.org/10.2118/99-13-38.
Ito, Y., and S. Suzuki. 1999. “Numerical simulation of the SAGD process in the Hangingstone oil sands reservoir.” J. Can. Pet. Technol. 38 (9): 3–15. https://doi.org/10.2118/99-09-02.
Ji, D., H. Zhong, M. Dong, and Z. Chen. 2015. “Study of heat transfer by thermal expansion of connate water ahead of a steam chamber edge in the steam-assisted-gravity-drainage process.” Fuel 150 (Jul): 592–601. https://doi.org/10.1016/j.fuel.2015.02.065.
Jimenez, J. 2008.“The field performance of SAGD projects in Canada.” In Proc., Int. Petroleum Technology Conf. Richardson, TX: OnePetro.
Mwakipunda, G. C., Z. Yang, and C. Guo. 2023. “Infill drilling optimization for enhanced oil recovery by water flooding: A simulation study.” J. Energy Eng. 149 (1): 04022053. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000860.
Nukhaev, M. T., V. P. Pimenov, A. Shandrygin, and V. V. Tertychnyi. 2006. “A new analytical model for the SAGD production phase.” In Proc., SPE Annual Technical Conf. and exhibition. Richardson, TX: OnePetro.
Sharma, J., and I. D. Gates. 2010. “Multiphase flow at the edge of a steam chamber.” Can. J. Chem. Eng. 88 (3): 312–321. https://doi.org/10.1002/cjce.20280.
Sharma, J., and I. D. Gates. 2011. “Convection at the edge of a steam-assisted-gravity-drainage steam chamber.” SPE J. 16 (3): 503–512. https://doi.org/10.2118/142432-PA.
Wang, F., Z. Yang, X. Wang, and R. Lin. 2020. “Convection beyond the steam chamber interface in the steam-assisted-gravity-drainage process.” ACS Omega 5 (47): 30478–30487. https://doi.org/10.1021/acsomega.0c04264.
Xie, Y., Y. He, Y. Xiao, and T. Jiang. 2022. “Productivity prediction of multistage fractured horizontal wells in tight oil reservoirs with fully coupled flow and geomechanics.” J. Energy Eng. 148 (5): 05022002. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000849.
Yang, R., J. Zhang, L. Yang, H. Chen, and S. Tang. 2016. “Performance and calculation method of steam chamber overcoming high water saturation intervals during SAGD process.” In Proc., Int. Petroleum Technology Conf. Richardson, TX: OnePetro.
You, Z., L. Teng, W. Shouya, S. Lanxiang, D. Xuan, and W. Junling. 2019. “Models of steam-assisted gravity drainage (SAGD) steam chamber expanding velocity in double horizontal wells and its application.” Pet. Explor. Dev. 46 (2): 347–354. https://doi.org/10.1016/S1876-3804(19)60014-5.
Zhang, Z., H. Liu, X. Dong, and H. Jiang. 2018. “A new mathematical model to understand the convective heat transfer mechanism in steam-assisted gravity drainage process.” J. Therm. Sci. Eng. Appl. 10 (1): 011006. https://doi.org/10.1115/1.4036789.
Zhou, W., S. Chen, and M. Dong. 2016. “Novel insights on initial water mobility: Its effects on steam-assisted gravity drainage performance.” Fuel 174 (Jun): 274–286. https://doi.org/10.1016/j.fuel.2016.02.015.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 10, 2022
Accepted: Apr 1, 2023
Published online: Jun 5, 2023
Published in print: Aug 1, 2023
Discussion open until: Nov 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.