Research on Productivity Prediction Model of Three-Dimensional Directional Wells in Different Reservoirs
Publication: Journal of Energy Engineering
Volume 149, Issue 4
Abstract
Productivity prediction of perforation completion is key for well optimizing completion methods and reservoir engineering research. Productivity prediction models using an additional pressure drop to represent skin factor are limited. In this study, a steady-state productivity prediction model coupled with reservoir seepage and fluid flow in the wellbore was developed. The impact of different perforation parameters on well production was studied. Considering perforation depth, perforation density, perforation diameter, phase angle, depth of contaminated zone, and pollution degree of the contaminated zone, a semi-analytical skin calculation model under different reservoir conditions and completion methods with the least-squares method combining the consideration of perforation depth, perforation density, perforation diameter, phase angle, depth of contaminated zone, and pollution degree of the contaminated zone was developed. Perforation parameters were optimized. A 3D directional well unsteady productivity prediction model was established using the finite-volume method considering the influence of conventional perforation completion parameters, gravel packing perforation completion parameters, natural fractures, reservoir heterogeneity, reservoir scale, skin factor, fluid gravity, fluid compressibility, and rock compressibility. A new method for optimizing perforation parameters and characterizing skin factors was developed, providing a theoretical basis and simulation means for deeper understanding of the development law of directional wells.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published paper.
Acknowledgments
The authors gratefully acknowledge the support of the National Natural Science Foundation of China (Grant No. 52104033), and the State Key Laboratory of Petroleum Resources and Prospecting; China University of Petroleum (Grant No. PRP/open-2113), and the Postgraduate Innovation and Practice Ability Development Fund of Xi’ an Shiyou University (YCS22213041).
References
Chen, Y. Q., E. P. Guo, and Z. X. Peng. 2017. “Derivation of productivity formulas for horizontal well in anisotropic fault-block reservoirs.” Acta Petrolei Sin. 38 (12): 1420–1424. https://doi.org/10.7623/syxb201712009.
Dou, H. E. 1996. “A new method of predicting the productivity of horizontal well.” Oil Drill. Prod. Technol. 108 (1): 76–81. https://doi.org/10.13639/j.odpt.1996.01.019.
Ekhwaiter, A. 2021. “Quantifying the partial penetration skin factor for evaluating the completion efficiency of vertical oil wells.” J. Pet. Explor. Prod. Technol. 2021 (1): 1–13. https://doi.org/10.1007/S13202-021-01229-8.
Hu, J. H. 2017. “Fractured horizontal well productivity prediction in tight oil reservoirs.” J. Petrol. Sci. Eng. 151 (Dec): 159–168. https://doi.org/10.1016/j.petrol.2016.12.037.
Jacques, H. 2006. “An analytical model for predicting the productivity of perforated wells.” J. Petrol. Sci. Eng. 56 (4): 199–218. https://doi.org/10.1016/j.petrol.2006.09.001.
Jia, X. F., G. L. Lei, and Z. B. Sun. 2019. “A new formula for predicting productivity of horizontal wells in three-dimensional anisotropic reservoirs.” Pet. Geol. Recov. Eff. 26 (2): 113–119. https://doi.org/10.13673/j.cnki.cn37-1359/te.2019.02.016.
Li, D., and J. B. Chen. 2015. Mechanics of oil and gas flow in porous media. Berlin: Springer.
Lin, H. C., C. D. Wei, and X. B. Zou. 2022. “Sand control productivity prediction model for secondary completion of horizontal wells in offshore oilfield.” China Pet. Mach. 50 (4): 111–117. https://doi.org/10.16082/j.cnki.issn.1001-4578.2022.04.015.
Rakhimzhanova, A. 2022. “Numerical simulations of sand production in oilwells using the CFD-DEM-IBM approach.” J. Petrol. Sci. Eng. 208 (Dec): 1095269. https://doi.org/10.1016/J.PETROL.2021.109529.
Shan, Q. L., R. X. Zhang, and Y. J. Jiang. 2021. “Complexity and tortuosity hydraulic fracture morphology due to near-wellbore nonplanar propagation from perforated horizontal wells.” J. Nat. Gas. Sci. Eng. 89 (Sep): 103884. https://doi.org/10.1016/J.JNGSE.2021.103884.
Song, H. Q. 2018. Engineering fluid mechanics. Berlin: Springer.
Sun, E. H., D. D. Yang, and W. Yang. 2020. “Productivity prediction and its influencing factors for herring bone-like laterals well.” J. Chongqing Univ. Sci. Technol. 22 (3): 32–35. https://doi.org/10.19406/j.cnki.cqkjxyxbzkb.2020.03.010.
Tatsipie Nelson, R. K., and J. Sheng James. 2022. “Deep learning-based sensitivity analysis of the effect of completion parameters on oil production.” J. Petrol. Sci. Eng. 209 (Feb): 109906. https://doi.org/10.1016/J.PETROL.2021.109906.
Wang, J. X., X. Liu, and C. C. Niu. 2020. “A new productivity evaluation of method sand control completion by steam stimulation in heavy oil reservoirs.” Acta Petrolei Sin. 41 (1): 80–87. https://doi.org/10.7623/syxb202001007.
Xu, J., L. X. Jia, and Y. Chen. 2020. “Design of casing perforation parameters for offshore heavy oil thermal recovery wells.” China Offshore Oil Gas 32 (3): 118–123. https://doi.org/10.11935/j.issn.1673-1506.2020.03.014.
Yang, Y. N. 2020. “Numerical study on competitive propagation of multi-perforation fractures considering full hydro-mechanical coupling in fracture-pore dual systems.” J. Petrol. Sci. Eng. 191 (Aug): 107109. https://doi.org/10.1016/j.petrol.2020.107109.
Zhang, K., T. Long, and Y. Z. Wu. 2017. “Productivity prediction of remaining oil in high position of fault block reservoir using radial drilling.” Pet. Geol. Recov. Eff. 24 (5): 120–126. https://doi.org/10.3969/j.issn.1009-9603.2017.05.019.
Zhang, Z. 2021. “Numerical simulation of skin factors for perforated wells with crushed zone and drilling-fluid damage in tight gas reservoirs.” J. Nat. Gas. Sci. Eng. 90 (Jun): 103907. https://doi.org/10.1016/J.JNGSE.2021.103907.
Zheng, Z. J., and C. Yu. 2018. “Productivity forecasting model with consideration to stress sensitivities of matrix and acid-induced fractures.” Spec. Oil Gas Reservoirs 25 (4): 76–81. https://doi.org/10.3969/j.issn.1006-6535.2018.04.015.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 21, 2022
Accepted: Mar 20, 2023
Published online: Jun 5, 2023
Published in print: Aug 1, 2023
Discussion open until: Nov 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.