Research on Different Design of Plane Flow Fields about Intersection Node in PEMFC
Publication: Journal of Energy Engineering
Volume 149, Issue 3
Abstract
Because flow field design is an effective method for improving the performance of proton exchange membrane fuel cells, some novel flow fields have been proposed to improve mass transportation in the horizontal plane using numerical methods. Different geometrical characteristics in the horizontal plane, such as the intersection-node coverage area, intersection form, and intersection-node distribution, have been used to discuss their effects on cell performance. The simulation results were obtained from nine cases. According to the calculations, introducing a crossover node could increase the current density by up to 26%. The simulation results elucidated that expansion of the reaction area facilitates oxygen diffusion. Forced convection was induced by an inclined channel, which increased the reactant concentration in the downstream region. Therefore, the uniformity of the current density also increased. The flow rate of the gas was affected by the symmetrical mode. Among them, high gas flow velocities were more easily observed in a flow field with a centrally symmetric distribution node.
Practical Applications
Proton exchange membrane fuel cells are a promising energy conversion device for a wide range of applications. It can directly convert chemical energy into electrical energy. There is one key component in the fuel cell, named the bipolar plate. On them, there are channels with grooves formed by machining; comprehensive performances of the fuel cells are profoundly determined by the structure and distribution of these channels. Therefore, rational design of the flow field is an effective way to improve the fuel cell performance. If the channels are intersected by each other, the intersection nodes will be generated. That is, the structure of the flow field will be changed by introducing different intersection nodes in terms of coverage area, intersection form, and distribution. The purpose of these measures is to increase the residence time of the gas in the flow field. Therefore, this study will introduce the reader to how the performance of the fuel cell is affected by the flow field with intersection nodes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work is financially supported by National Natural Science Foundation of China (Nos. 51905068 and 52101008), the Natural Science Foundation of Liaoning Province (No. 2020-HYLH-24), the open research fund from the state key laboratory of rolling and automation, Northeastern University (No. 2020RALKFKT012), and the Projects for Dalian Youth Star of Science and Technology (No. 2021RQ135).
References
Adnan, M. 2016. “Green hydrogen energy system: A policy on reducing petroleum-based global unrest.” Int. J. Global Warming 10 (1–3): 354–370. https://doi.org/10.1504/IJGW.2016.077906.
Ahmadi, N., S. Rezazadeh, A. Dadvand, and I. Mirzaee. 2015. “Numerical investigation of the effect of gas diffusion layer with semicircular prominences on polymer exchange membrane fuel cell performance and species distribution.” J. Renewable Energy Environ. 2 (2): 36–46.
ANSYS Academic Research. 2020. Release 14.0, Help system, fuel cell modules manual. Canonsburg, PA: ANSYS, Inc.
Arvay, A., A. Ahmed, X. H. Peng, and A. M. Kannan. 2012. “Convergence criteria establishment for 3D simulation of proton exchange membrane fuel cell.” Int. J. Hydrogen Energy 37 (3): 2482–2489. https://doi.org/10.1016/j.ijhydene.2011.11.005.
Ashrafi, H., N. Pourmahmoud, M. Iraj, and A. Nima. 2022. “Performance improvement of proton-exchange membrane fuel cells through different gas injection channel geometries.” Int. J. Energy Res. 46 (7): 8781–8792. https://doi.org/10.1002/er.7755.
Byun, S. J., Z. H. Wang, J. Son, D. K. Kwak, and Y. C. Kwon. 2018. “Experimental study on improvement of performance by wave form cathode channels in a PEM fuel cell.” Energies 11 (2): 319. https://doi.org/10.3390/en11020319.
Cano-Andrade, S., A. Hernandez-Guerrero, M. R. Spakovsky, C. E. Damian-Ascencio, and J. C. Rubio-Arana. 2010. “Current density and polarization curves for radial flow field patterns applied to PEMFCs (proton exchange membrane fuel cells).” Energy 35 (2): 920–927. https://doi.org/10.1016/j.energy.2009.07.045.
Chen, X., Y. Chen, Q. Liu, J. H. Xu, Q. X. Liu, W. B. Li, Y. Zhang, Z. M. Wan, and X. D. Wang. 2021a. “Performance study on a stepped flow field design for bipolar plate in PEMFC.” Energy Rep. 7 (Apr): 336–347. https://doi.org/10.1016/j.egyr.2021.01.003.
Chen, X., Z. Yu, C. Yang, Y. Chen, C. Jin, and Y. Ding. 2021b. “Performance investigation on a novel 3D wave flow channel design for PEMFC.” Int. J. Hydrogen Energy 46 (19): 11127–11139. https://doi.org/10.1016/j.ijhydene.2020.06.057.
Chowdhury, M. Z., O. Genc, and S. Toros. 2018. “Numerical optimization of channel to land width ratio for PEM fuel cell.” Int. J. Hydrogen Energy 43 (23): 10798–10809. https://doi.org/10.1016/j.ijhydene.2017.12.149.
Ding, L., T. Tang, and J. S. Hu. 2021. “Recent progress in proton-exchange membrane fuel cells based on metal-nitrogen-carbon catalysts.” Acta Phys. Chim. Sin. 37 (9): 1–21. https://doi.org/10.3866/PKU.WHXB202010048.
Esfeh, H., A. Azarafza, and M. Hamid. 2017. “On the computational fluid dynamics of PEM fuel cells (PEMFCs): An investigation on mesh independence analysis.” RSC Adv. 7 (52): 32893–32902. https://doi.org/10.1039/C7RA03236F.
Ferng, Y. M., and A. Su. 2007. “A three-dimensional full-cell CFD model used to investigate the effects of different flow channel designs on PEMFC performance.” Int. J. Hydrogen Energy 32 (17): 4466–4476. https://doi.org/10.1016/j.ijhydene.2007.05.012.
Friess, B. R., and M. Hoorfar. 2012. “Development of a novel radial cathode flow field for PEMFC.” Int. J. Hydrogen Energy 37 (9): 7719–7729. https://doi.org/10.1016/j.ijhydene.2012.02.012.
Gou, B., K. N. Woon, and D. Bill. 2011. Fuel cells modeling, control, and application. 1st ed. Beijing: China Machine Press.
Heidary, H., M. J. Kermani, and B. Dabir. 2016. “Influences of bipolar plate channel blockages on PEM fuel cell performances.” Energy Convers. Manage. 124 (6): 51–60. https://doi.org/10.1016/j.enconman.2016.06.043.
Huang, Z., and Z. Tu. 2020. “Local current density distribution of proton exchange membrane fuel cell and its research prospects.” Prog. Chem. 32 (7): 943–949. https://doi.org/10.7536/PC191120.
Jabbary, A., S. R. Arnesa, H. Samanipour, and N. Ahmadi. 2021. “Numerical investigation of 3D rhombus designed PEMFC on the cell performance.” Int. J. Green Energy 18 (5): 425–442. https://doi.org/10.1080/15435075.2020.1865361.
Jang, J. H., W. M. Yan, H. Y. Li, and W. C. Tsai. 2008. “Three-dimensional numerical study on cell performance and transport phenomena of PEM fuel cells with conventional flow fields.” Int. J. Hydrogen Energy 33 (1): 156–164. https://doi.org/10.1016/j.ijhydene.2007.09.005.
Jang, J. Y., C. H. Cheng, W. T. Liao, Y. X. Huang, and Y. C. Tsai. 2012. “Experimental and numerical study of proton exchange membrane fuel cell with spiral flow channels.” Appl. Energy 99 (Apr): 67–79. https://doi.org/10.1016/j.apenergy.2012.04.011.
Kim, B. S., Y. Lee, A. Woo, and Y. C. Kim. 2013. “Effects of cathode channel size and operating conditions on the performance of air-blowing PEMFCs.” Appl. Energy 111 (Apr): 441–448. https://doi.org/10.1016/j.apenergy.2013.04.091.
Ko, D. S., Y. M. Kang, J. S. Yang, J. H. Jeong, G. M. Choi, and D. J. Kim. 2010. “The effect of channel flow pattern on internal properties distribution of a proton exchange membrane fuel cell for cathode starvation conditions.” J. Mech. Sci. Technol. 24 (2): 537–543. https://doi.org/10.1007/s12206-010-0103-3.
Kumbur, E., K. Sharp, and M. Mench. 2006. “Liquid droplet behavior and instability in a polymer electrolyte fuel cell flow channel.” J. Power Sources 161 (1): 333–345. https://doi.org/10.1016/j.jpowsour.2006.04.093.
Kuo, J., and C. Chen. 2006. “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle.” J. Power Sources 162 (2): 1122–1129. https://doi.org/10.1016/j.jpowsour.2006.07.053.
Limjeerajarus, N., and P. Charoen-amornkitt. 2015. “Effect of different flow field designs and number of channels on performance of a small PEFC.” Int. J. Hydrogen Energy 40 (22): 7144–7158. https://doi.org/10.1016/j.ijhydene.2015.04.007.
Limjeerajarus, N., T. Yanagimoto, T. Yamamoto, T. Ito, and T. Yamaguchi. 2008. “Quantitative analysis of oxygen-containing species adsorbed on the Pt surface of a polymer electrolyte fuel cell membrane electrode assembly electrode using stripping voltammetry.” J. Power Sources 185 (1): 217–221. https://doi.org/10.1016/j.jpowsour.2008.06.044.
Lin, P. J., H. Y. Wang, G. D. Wang, J. R. Li, and J. C. Sun. 2022. “Numerical study of optimized three-dimension novel Key-shaped flow field design for proton exchange membrane fuel cell.” Int. J. Hydrogen Energy 47 (8): 5541–5552. https://doi.org/10.1016/j.ijhydene.2021.11.170.
Marappan, M., K. Palaniswamy, T. Velumani, K. B. Chul, R. Velayutham, P. Shivakumar, and S. Sundaram. 2021. “Performance studies of proton exchange membrane fuel cells with different flow field designs—Review.” Chem. Rec. 21 (Jun): 663–714. https://doi.org/10.1002/tcr.202000138.
Nguyen, D., W. Kaewmanee, M. Hinaje, J. Fontchastagner, D. Netter, S. Rael, and B. Davat. 2010. “Comparison between voltage and current boundary conditions in PEMFC model.” ECS Trans. 26 (1): 143–153. https://doi.org/10.1149/1.3428985.
Ramadan, M. 2021. “A review on coupling green sources to green storage (G2G): Case study on solar-hydrogen coupling.” Int. J. Hydrogen Energy 46 (59): 30547–30558. https://doi.org/10.1016/j.ijhydene.2020.12.165.
Samanpour, H., N. Ahmadi, and A. Jabbary. 2022. “Effects of applying brand–New designs on the performance of PEM fuel cell and water flooding phenomena.” Iran. J. Chem. Chem. Eng. 41 (2): 618–635. https://doi.org/10.30492/IJCCE.2020.130908.4225.
Sauermoser, M., N. Kizilova, B. G. Pollet, and S. Kjelstrup. 2020. “Flow field patterns for proton exchange membrane fuel cells.” Front. Energy Res. 8 (Apr): 1–13. https://doi.org/10.3389/fenrg.2020.00013.
Sauermoser, M., B. G. Pollet, N. Kizilova, and S. Kjelstrup. 2021. “Scaling factors for channel width variations in tree-like flow field patterns for polymer electrolyte membrane fuel cells—An experimental study.” Int. J. Hydrogen Energy 46 (37): 19554–19568. https://doi.org/10.1016/j.ijhydene.2021.03.102.
Shen, J., Z. K. Tu, and S. H. Chan. 2019. “Enhancement of mass transfer in a proton exchange membrane fuel cell with blockage in the flow channel.” Appl. Therm. Eng. 149 (Dec): 1408–1418. https://doi.org/10.1016/j.applthermaleng.2018.12.138.
Wang, C., Q. L. Zhang, S. Y. Shen, X. H. Yan, F. J. Zhu, X. J. Cheng, and J. L. Zhang. 2017. “The respective effect of under-rib convection and pressure drop of flow fields on the performance of PEM fuel cells.” Sci. Rep. 7 (43447): 1–9. https://doi.org/10.1038/srep43447.
Wang, G. D., H. Y. Wang, L. Jiang, P. J. Lin, J. R. Li, and J. C. Sun. 2021. “Numerical study on dual-region mass transport at wave flow field of proton exchange membrane fuel cell.” Fuel Cells 22 (1–2): 12–22. https://doi.org/10.1002/fuce.202100086.
Wang, Y., Z. Y. Sun, and L. Yang. 2022. “Enhancement effects of the obstacle arrangement and gradient height distribution in serpentine flow-field on the performances of a PEMFC.” Energy Convers. Manage. 252 (Jun): 115077–115087. https://doi.org/19554-1956810.1016/j.enconman.2021.115077.
Yan, X. H., C. Guan, Y. Zhang, K. C. Jiang, G. H. Wei, X. J. Cheng, S. Y. Shen, and J. L. Zhang. 2019. “Flow field design with 3D geometry for proton exchange membrane fuel cells.” Appl. Therm. Eng. 147 (9): 1107–1114. https://doi.org/10.1016/j.applthermaleng.2018.09.110.
Yang, P., Y. Wang, and Z. Jin. 2021. “Numerical simulation study on operation characteristics of PEMFC in low temperature environment.” J. Renewable Sustainable Energy 13 (1): 1–13. https://doi.org/10.1063/5.0021429.
Zhai, S., U. Zhou, and P. T. Sun. 2018. Study of numerical methods and several typical phenomena of proton exchange membrane fuel cell. 1st ed. Shanghai, China: Tongji University Press.
Zhang, Y., A. Verma, and R. Pitchumani. 2016. “Optimum design of polymer electrolyte membrane fuel cell with graded porosity gas diffusion layer.” J. Power Sources 41 (20): 8412–8426. https://doi.org/10.1016/j.ijhydene.2016.02.077.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 28, 2022
Accepted: Jan 9, 2023
Published online: Feb 24, 2023
Published in print: Jun 1, 2023
Discussion open until: Jul 24, 2023
ASCE Technical Topics:
- Density currents
- Energy engineering
- Energy sources (by type)
- Engineering fundamentals
- Flow (fluid dynamics)
- Fluid dynamics
- Fluid mechanics
- Gas flow
- Highway and road management
- Highway transportation
- Highways and roads
- Hydrologic engineering
- Infrastructure
- Intersections
- Mathematics
- Membranes
- Methodology (by type)
- Numerical methods
- Renewable energy
- Structural engineering
- Structural members
- Structural systems
- Symmetry
- Transportation engineering
- Velocity distribution
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Wenshan Qin, Fei Dong, Sheng Xu, Xin Chen, Senhao Zhang, Numerical Investigation of Dynamic Behavior of Water with Different Initial Forms in Wave Channel, Journal of Energy Engineering, 10.1061/JLEED9.EYENG-5190, 150, 1, (2024).
- Hao Pei, Shuai Liu, Zhong Wang, Libin Zhang, Xiaohang Yao, Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel, Journal of Energy Engineering, 10.1061/JLEED9.EYENG-4875, 149, 5, (2023).