An Improved Dimensional Model for Calculating the Wetting Pattern in Soil under Drip Irrigation
Publication: Journal of Irrigation and Drainage Engineering
Volume 149, Issue 9
Abstract
The development of wetting zone in soil under drip irrigation is an important design parameter that is difficult to determine a priori. Using Hydrus-two-dimensional (2D), this paper studied water movement emanating from the drip emitter under different conditions, from which we proposed an improved dimensional model to calculate the radius and depth of the wetting zone using initial soil water content, saturated hydraulic conductivity, irrigation amount, and dripping rate as independent variables. The accuracy of the model was validated against experimental data published in the literature and measured by us. The results show that, compared with experimental data, the root mean square error of the wetting radius and depth estimated using the proposed model are 3.05 cm and 4.76 cm, respectively, with their associated Nash efficiency coefficient being 0.805 and 0.767, respectively. Compared with existing dimensional models that do not consider initial soil moisture prior to irrigation, the proposed model is more accurate and can be reliably used for drip irrigation design.
Practical Applications
The development of wetting zone and its final shape on the soil surface under drip irrigation is an important parameter to design the distance between emitters but difficult to determine analytically because of the complexity and nonlinearity of soil water flow. Based on previous work, this paper proposes an improved dimensional model to analytically calculate the size of the wetting zone. The model is mathematically simple and uses initial soil moisture content, saturated hydraulic conductivity and irrigation amount as independent variables. The soil physical parameters (saturated hydraulic conductivity and soil matrix potential) in the proposed model can be easily obtained through conventional field experiments. Test against experimental data measured by us and published in the literature for different soils shows that the proposed model is more accurate and robust than existing models and can be used to help design drip irrigation in different soils.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data used in this paper are available from the corresponding author upon request.
Acknowledgments
This research is funded by the National Natural Science Foundation of China (No. 51969013) and the Natural Science Foundation of Gansu Province (No. 21JR7RA225).
References
Abbass, A. D., and H. A. AL-Thamiry. 2019. “Field evaluating of wetting pattern from surface drip irrigation system for sand and sandy loam soils.” Assoc. Arab Univ. J. Eng. Sci. 26 (2): 19–27. https://doi.org/10.33261/jaaru.2019.26.2.004.
Ahmed, A. T., H. Saqib, and X. S. Wang. 2021. “A stabilizer free weak Galerkin finite element method for parabolic equation.” J. Comput. Appl. Math. 392 (6): 113373. https://doi.org/10.1016/j.cam.2020.113373.
Al-Ogaidi, A. A. M., A. Wayayok, M. R. Kamal, and A. F. Abdullah. 2015. “A modified empirical model for estimating the wetted zone dimensions under drip irrigation.” J. Teknol. 76 (15): 69–73. https://doi.org/10.11113/jt.v76.5954.
Amin, M. S. M., and A. I. M. Ekhmaj. 2006. “DIPAC-drip irrigation water distribution pattern calculator.” In Vol. 1016 of Proc., 7th Int. Micro Irrigation Congress, 503–513. Seri Kembangan, Malaysia: Univ. Putra Malaysia.
Arraes, F. D., J. H. D. Miranda, and S. N. Duarte. 2019. “Modeling soil water redistribution under surface drip irrigation.” Eng. Agríc. 39 (Jan): 55–64. https://doi.org/10.1590/1809-4430-eng.agric.v39n1p55-64/2019.
Bai, X., A. I. Yidan, H. Yang, G. E. Yuxuan, Z. Xing, and H. U. Xiaotao. 2019. “Effects of different initial water content and dripper discharge on wetted body characteristic of drip irrigation.” J. Irrig. Drain. 38 (8): 73–78. https://doi.org/10.13522/j.cnki.ggps.20180701.
Bajpai, A., and A. Kaushal. 2020. “Soil moisture distribution under trickle irrigation: A review.” Water Supply 20 (3): 761–772. https://doi.org/10.2166/ws.2020.005.
Brandt, A., E. Bresler, N. Diner, I. Ben-Asher, J. Heller, and D. Goldberg. 1971. “Infiltration from a trickle source: I. Mathematical models.” Soil Sci. Soc. Am. J. 35 (5): 675–682. https://doi.org/10.2136/sssaj1971.03615995003500050018x.
Bresler, E. 1978. “Analysis of trickle irrigation with application to design problems.” Irrig. Sci. 1 (1): 3–17. https://doi.org/10.1007/BF00269003.
Cristóbal-Muñoz, I., J. V. Prado-Hernández, A. Martínez-Ruiz, F. Pascual-Ramírez, D. Cristóbal-Acevedo, and D. Cristóbal-Muñoz. 2022. “An improved empirical model for estimating the geometry of the soil wetting front with surface drip irrigation.” Water 14 (11): 1827. https://doi.org/10.3390/w14111827.
Elmaloglou, S. T., and N. Malamos. 2006. “A methodology for determining the surface and vertical components of the wetting front under a surface point source, with root water uptake and evaporation.” Irrig. Drain.: J. Int. Commission Irrig. Drain. 55 (1): 99–111. https://doi.org/10.1002/ird.220.
Elnesr, M. N., and A. A. Alazba. 2019. “Computational evaluations of HYDRUS simulations of drip irrigation in 2D and 3D domains i-Surface drippers.” Comput. Electron. Agric. 162 (Jul): 189–205. https://doi.org/10.1016/j.compag.2019.03.035.
Kandelous, M. M., and J. Simunek. 2010. “Comparison of numerical, analytical, and empirical models to estimate wetting patterns for surface and subsurface drip irrigation.” Irrig. Sci. 28 (5): 435–444. https://doi.org/10.1007/s00271-009-0205-9.
Khan, A. A., M. Yitayew, and A. W. Warrick. 1996. “Field evaluation of water and solute distribution from a point source.” J. Irrig. Drain. Eng. 122 (4): 221–227. https://doi.org/10.1061/(ASCE)0733-9437(1996)122:4(221).
Kilic, M. 2020. “A new analytical method for estimating the 3D volumetric wetting pattern under drip irrigation system.” Agric. Water Manage. 228 (Feb): 105898. https://doi.org/10.1016/j.agwat.2019.105898.
Li, G. Y., D. C. Zeng, and Y. Q. Zheng. 1998. “Dynamic model and numerical simulation of soil water movement under surface trickle drip irrigation.” J. Hydraul. Eng. 11 (5): 21–25. https://doi.org/10.3321/j.issn:0559-9350.1998.11.004.
Li, H. R., X. R. Mei, J. D. Wang, F. Huang, W. P. Hao, and B. G. Li. 2021. “Drip fertigation significantly increased crop yield, water productivity and nitrogen use efficiency with respect to traditional irrigation and fertilization practices: A meta-analysis in China.” Agric. Water Manage. 244 (Feb): 106534. https://doi.org/10.1016/j.agwat.2020.106534.
Li, J., J. Zhang, and L. Ren. 2003. “Water and nitrogen distribution as affected by fertigation of ammonium nitrate from a point source.” Irrig. Sci. 22 (1): 19–30. https://doi.org/10.1007/s00271-003-0064-8.
Malek, K., and R. Peters. 2011. “Wetting pattern models for drip irrigation: A new empirical model.” J. Irrig. Drain. Eng. 137 (8): 530–536. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000320.
Moncef, H., D. Hedi, B. Jelloul, and M. Mohamed. 2002. “Approach for predicting the wetting front depth beneath a surface point source: Theory and numerical aspect.” Irrig. Drain. 51 (4): 347–360. https://doi.org/10.1002/ird.60.
Moncef, H., and Z. Khemaies. 2016. “An analytical approach to predict the moistened bulb volume beneath a surface point source.” Agric. Water Manage. 166 (Mar): 123–129. https://doi.org/10.1016/j.agwat.2015.12.020.
Moriasi, D. N., J. G. Arnold, M. Liew, R. L. Bingner, R. D. Harmel, and T. L. Veith. 2007. “Model evaluation guidelines for systematic quantification of accuracy in watershed simulations.” Trans. ASABE 50 (3): 885–900. https://doi.org/10.13031/2013.23153.
Mualem, Y. 1976. “A new model for predicting the hydraulic conductivity of unsaturated porous media.” Water Resour. Res. 12 (3): 513–522. https://doi.org/10.1029/WR012i003p00513.
Naglič, B., C. Kechavarzi, F. Coulon, and M. Pintar. 2014. “Numerical investigation of the influence of texture, surface drip emitter discharge rate and initial soil moisture condition on wetting pattern size.” Irrig. Sci. 32 (6): 421–436. https://doi.org/10.1007/s00271-014-0439-z.
Richards, L. A. 1931. “Capillary conduction of liquids through porous mediums.” Physics 1 (5): 318–333. https://doi.org/10.1063/1.1745010.
Schwartzman, M., and B. Zur. 1986. “Emitter spacing and geometry of wetted soil volume.” J. Irrig. Drain. Eng. 112 (3): 242–253. https://doi.org/10.1061/(ASCE)0733-9437(1986)112:3(242).
Skaggs, T. H., T. J. Trout, and Y. Rothfuss. 2012. “Drip irrigation water distribution patterns: Effects of emitter rate, pulsing, and antecedent water.” Soil Sci. Soc. Am. J. 74 (6): 1886. https://doi.org/10.2136/sssaj2009.0341.
Surendran, U., and K. M. Chandran. 2022. “Development and evaluation of drip irrigation and fertigation scheduling to improve water productivity and sustainable crop production using HYDRUS.” Agric. Water Manage. 269 (Jul): 107668. https://doi.org/10.1016/j.agwat.2022.107668.
Thomée, V. 1984. Galerkin finite element methods for parabolic problems, 1054. Berlin: Springer.
Van Genuchten, M. T. 1980. “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J. 44 (5): 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.
Vidya, K. N., K. Nagarajan, B. Kannan, S. P. Ramanathan, and M. R. Duraisamy. 2022. “Modelling of wetting patterns for surface drip irrigation in dense clay soil.” J. Appl. Nat. Sci. 14 (2): 437–442. https://doi.org/10.31018/jans.v14i2.3420.
Wooding, R. A. 1968. “Steady infiltration from a shallow circular pond.” Water Resour. Res. 4 (6): 1259–1273. https://doi.org/10.1029/WR004i006p01259.
Yitayew, M., A. A. Khan, and A. W. Warrick. 1998. “In situ measurements of soil hydraulic conductivity using point application of water.” Appl. Eng. Agric. 14 (2): 115–120. https://doi.org/10.13031/2013.19372.
Information & Authors
Information
Published In
Journal of Irrigation and Drainage Engineering
Volume 149 • Issue 9 • September 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 22, 2022
Accepted: Apr 11, 2023
Published online: Jul 3, 2023
Published in print: Sep 1, 2023
Discussion open until: Dec 3, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.