Framework for Evaluating and Mitigating Industrial Air Pollution in India: Systematic Review of Concepts and Unmet Needs
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 29, Issue 1
Abstract
No long-term solution can evaluate the social and environmental requirements of communities near industries, especially in developing countries. The global landscape of technology, innovation, and industry has undergone significant transformation since the start of the Industrial Revolution, which has significantly altered the traditional socioeconomic structure of society, especially in urban regions. Industrialization has had positive and negative effects on society and the environment, which has left an enduring impact that includes improved employment prospects and economic growth. However, it brings adverse impacts, such as more pollution, greenhouse gas emissions, health risks, and changes in local communities and lifestyles. Threfore, efficient instruments and remedies must be used to mitigate the adverse effects of industrial activity and advances. Livability and environmental impact evaluations have become crucial tools for transforming the social and ecological spheres. Creating air pollution concentration models, particularly for industrial plumes, is a research need that is unresolved by the current environmental impact assessment (EIA) guidelines and procedures. Industries present severe risks to the population and ecosystems, because of the rapid changes in their mechanisms. In addition, no standardized method exists for assessing communities close to urban industrial clusters that encircle industrial development regions in the EIA and social impact assessment (SIA) evaluations. The national building codes (NBCs), urban and regional development plans formulation and implementation (URDPFI), and model building bylaws ignore this discrepancy. Several organizations have developed substitute models, such as California puff (CALPUFF) model from the USEPA and California Department of Pollution Monitoring, which outline risk assessment techniques for different models. Cambridge University’s Atmospheric Dispersion Modeling System-Urban (ADMS), from Cambridge Environmental Research Consultants, stands out as a widely used tool for evaluating pollution dispersion. Given the complexity of industrial emissions from several sources within a cluster of firms, a new strategy to lessen the effects of industrial plumes on the populations that live close to these zones is desperately needed. This means that communities must be categorized geographically according to different building heights and unique building regulations, which consider factors such as wind direction, atmospheric conditions, and separation from the sources of the emissions. This study used a cross-sectional methodology for a literature review of different issues that are due to the industrial plume rise heights in different domains.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or codes were generated or used during the study.
Acknowledgments
The authors are thankful to the anonymous reviewers for their constructive suggestions to improve the quality of the present work.
References
Abas, N., A. Kalair, N. Khan, and A. R. Kalair. 2017. “Review of GHG emissions in Pakistan compared to SAARC countries.” Renewable Sustainable Energy Rev. 80: 990–1016. https://doi.org/10.1016/j.rser.2017.04.022.
Ader, A. W., T. A. Kimmel, and R. G. Sussman. 2009. “Applying health-based risk assessments to worker and product safety for potent pharmaceuticals in contract manufacturing operations.” Am. Pharm. Outsourcing 10 (4): 48–54.
Adgate, J. L., G. Ramachandran, G. C. Pratt, L. A. Waller, and K. Sexton. 2003. “Longitudinal variability in outdoor, indoor, and personal PM2.5 exposure in healthy non-smoking adults.” Atmos. Environ. 37 (7): 993–1002. https://doi.org/10.1016/S1352-2310(02)00978-0.
Anand, S., A. Arakali, A. Jana, J. Koduganti, and N. Sami. 2015. Manufacturing cities: Industrial policy and urban growth. Bangalore, India: Institute for Human Settlements.
Armand, P., et al. 2016. “Best practice guidelines for the use of atmospheric dispersion models at local scale in case of hazmat releases into the air.” In Proc., 2016—17th Int. Conf., on Harmonisation Within Atmospheric Dispersion Modelling for Regulatory Purposes, 459–465. Budapest, Hungary: European Union (EU).
Atkinson, D. G., D. T. Bailey, J. S. Irwin, and J. S. Touma. 1997. “Improvements to the EPA industrial source complex dispersion model.” J. Appl. Meteorol. 36 (8): 1088–1095. https://doi.org/10.1175/1520-0450(1997)036%26lt;1088:ITTEIS%3E2.0.CO;2.
Baek, S.-O., Y.-S. Kim, and R. Perry. 1997. “Indoor air quality in homes, offices and restaurants in Korean urban areas—Indoor/outdoor relationships.” Atmos. Environ. 31 (4): 529–544. https://doi.org/10.1016/S1352-2310(96)00215-4.
Bardhan, R., R. Debnath, J. Malik, and A. Sarkar. 2018. “Low-income housing layouts under socio-architectural complexities: A parametric study for sustainable slum rehabilitation.” Sustainable Cities Soc. 41: 126–138. https://doi.org/10.1016/j.scs.2018.04.038.
Baxter, L. K., J. E. Clougherty, F. Laden, and J. I. Levy. 2007. “Predictors of concentrations of nitrogen dioxide, fine particulate matter, and particle constituents inside of lower socioeconomic status urban homes.” J. Exposure Sci. Environ. Epidemiol. 17 (5): 433–444. https://doi.org/10.1038/sj.jes.7500532.
Belcher, S. E. 2005. “Mixing and transport in urban areas.” Phil. Trans. R. Soc. A: Math. Phys. Eng. Sci. 363 (1837): 2947–2968. https://doi.org/10.1098/rsta.2005.1673.
Breitner, S., et al. 2011. “Sub-micrometer particulate air pollution and cardiovascular mortality in Beijing, China.” Sci. Total Environ. 409 (24): 5196–5204. https://doi.org/10.1016/j.scitotenv.2011.08.023.
Cao, B., W. Cui, C. Chen, and Y. Chen. 2020. “Development and uncertainty analysis of radionuclide atmospheric dispersion modeling codes based on Gaussian plume model.” Energy 194: 116925. https://doi.org/10.1016/j.energy.2020.116925.
Chakrabarti, S., and N. Mitra. 2005. “Economic and environmental impacts of pollution control regulation on small industries: A case study.” Ecol. Econ. 54 (1): 53–66. https://doi.org/10.1016/j.ecolecon.2004.09.019.
Chan, A. T. 2002. “Indoor—Outdoor relationships of particulate matter and nitrogen oxides under different outdoor meteorological conditions.” Atmos. Environ. 36: 1543–1551. https://doi.org/10.1016/S1352-2310(01)00471-X.
Chung, K.-C., and S.-P. Hsu. 2001. “Effect of ventilation pattern on room air and contaminant distribution.” Build. Environ. 36 (9): 989–998. https://doi.org/10.1016/S0360-1323(00)00051-2.
Cimorelli, A. J., S. G. Perry, A. Venkatram, J. C. Weil, R. J. Paine, R. B. Wilson, R. F. Lee, W. D. Peters, and R. W. Brode. 2005. “AERMOD: A dispersion model for industrial source applications. Part I: General model formulation and boundary layer characterization.” J. Appl. Meteorol. 44 (5): 682–693. https://doi.org/10.1175/JAM2227.1.
Cohen, A. J., et al. 2017. “Estimates and 25-year trends of the global burden of disease attributable to ambient air pollution: An analysis of data from the Global Burden of Diseases Study 2015.” Lancet 389 (10082): 1907–1918. https://doi.org/10.1016/S0140-6736(17)30505-6.
Cort, R. 1999. Environmental epidemiology. Volume 2: Use of the Gary literature and other data in environmental epidemiology. In The quarterly review of biology, edited by J. D. Thomson, J. J. Wiens, G. A. Wray. New York: Stony Brook Univ. Committee on environmental epidemiology.
CPCB (Central Pollution Control Board). 2023. Classification of industrial sectors into red, Orange, Green and White categories: A tool for progressive environmental management. Delhi, India: CPCB.
Cui, L., et al. 2020. “Chemical content and source apportionment of 36 heavy metal analysis and health risk assessment in aerosol of Beijing.” Environ. Sci. Pollut. Res. 27 (7): 7005–7014. https://doi.org/10.1007/s11356-019-06427-w.
Dastoorpoor, M., Z. Sekhavatpour, K. Masoumi, M. J. Mohammadi, H. Aghababaeian, N. Khanjani, B. Hashemzadeh, and M. Vahedian. 2019. “Air pollution and hospital admissions for cardiovascular diseases in Ahvaz, Iran.” Sci. Total Environ. 652: 1318–1330. https://doi.org/10.1016/j.scitotenv.2018.10.285.
Di Sabatino, S., R. Buccolieri, B. Pulvirenti, and R. Britter. 2007. “Simulations of pollutant dispersion within idealised urban-type geometries with CFD and integral models.” Atmos. Environ. 41 (37): 8316–8329. https://doi.org/10.1016/j.atmosenv.2007.06.052.
Diapouli, E., A. Chaloulakou, N. Mihalopoulos, and N. Spyrellis. 2008. “Indoor and outdoor PM mass and number concentrations at schools in the Athens area.” Environ. Monit. Assess. 136 (1–3): 13–20. https://doi.org/10.1007/s10661-007-9724-0.
Dockery, D. W., and J. D. Spengler. 1981. “Indoor-outdoor relationships of respirable sulfates and particles.” Atmos. Environ. 15 (3): 335–343. https://doi.org/10.1016/0004-6981(81)90036-6.
EIA (Environmental Impact Assessment). 2020. “Environmental Impact Assessment (EIA): Draft 2020.” Accessed October 25, 2023. https://www.drishtiias.com/to-the-points/paper3/environmental-impact-assessment-eia-draft-2020.
Gad, S. C. 2014. “Epidemiology.” In Encyclopedia of toxicology. 3rd ed., edited by P. Wexler, 433–437. Amsterdam, Netherlands: Elsevier.
Gonçalves, G. D. L., W. L. Filho, S. D. S. Neiva, A. B. Deggau, M. D. O. Veras, F. Ceci, M. A. de Lima, and J. B. S. O. D. A. Guerra. 2021. “The impacts of the fourth industrial revolution on smart and sustainable cities.” Sustainability 13 (13): 1–21. https://doi.org/10.3390/su13137165.
Goyal, S. K., and C. V. Chalapati Rao. 2007. “Assessment of atmospheric assimilation potential for industrial development in an urban environment: Kochi (India).” Sci. Total Environ. 376 (1–3): 27–39. https://doi.org/10.1016/j.scitotenv.2007.01.067.
Hang, J., and Y. Li. 2011. “Age of air and air exchange efficiency in high-rise urban areas and its link to pollutant dilution.” Atmos. Environ. 45 (31): 5572–5585. https://doi.org/10.1016/j.atmosenv.2011.04.051.
Hassan, S., U. H. Akter, P. Nag, M. M. Molla, A. Khan, and M. F. Hasan. 2022. “Large-eddy simulation of airflow and pollutant dispersion in a model street canyon intersection of Dhaka City.” Atmosphere 13 (7): 1–24. https://doi.org/10.3390/atmos13071028.
HEI (Health Effects Institute). 2019. State of global air 2019. Boston, MA: HEI.
Hoek, G., et al. 2008. “Indoor-outdoor relationships of particle number and mass in four European cities.” Atmos. Environ. 42 (1): 156–169. https://doi.org/10.1016/j.atmosenv.2007.09.026.
Holmes, N. S., and LÃ Morawska. 2006. “A review of dispersion modelling and its application to the dispersion of particles : An overview of different dispersion models available.” Atmos. Environ. 40 (2): 5902–5928. https://doi.org/10.1016/j.atmosenv.2006.06.003.
Honaganahalli, P. S., and J. N. Seiber. 2000. “Measured and predicted airshed concentrations of methyl bromide in an agricultural valley and applications to exposure assessment.” Atmos. Environ. 34 (21): 3511–3523. https://doi.org/10.1016/S1352-2310(00)00138-2.
Hou, S., N. Zheng, L. Tang, X. Ji, Y. Li, and X. Hua. 2019. “Pollution characteristics, sources, and health risk assessment of human exposure to Cu, Zn, Cd and Pb pollution in urban street dust across China between 2009 and 2018.” Environ. Int. 128: 430–437. https://doi.org/10.1016/j.envint.2019.04.046.
Huo, H., F. Chen, X. Geng, J. Tao, Z. Liu, W. Zhang, and P. Leng. 2021. “Simulation of the urban space thermal environment based on computational fluid dynamics: A comprehensive review.” Sensors 21 (20): 1–27. https://doi.org/10.3390/s21206898.
IISD (International Institute for Sustainable Development). 2016. “Environmental impact assessment training manual.” Accessed November 20, 2023. https://www.iisd.org/learning/eia/wp-content/uploads/2016/06/EIA-Manual.pdf.
Johnson, J. B. 2022. “An introduction to atmospheric pollutant dispersion.” Environ. Sci. Proc 19(1), 18. https://doi.org/10.3390/ecas2022-12826.
Johnson, T., J. Myers, T. Kelly, A. Wisbith, and W. Ollison. 2004. “A pilot study using scripted ventilation conditions to identify key factors affecting indoor pollutant concentration and air exchange rate in a residence.” J. Exposure Anal. Environ. Epidemiol. 14 (1): 1–22. https://doi.org/10.1038/sj.jea.7500294.
Kanawade, V. P., A. K. Srivastava, K. Ram, E. Asmi, V. Vakkari, V. K. Soni, V. Varaprasad, and C. Sarangi. 2020. “What caused severe air pollution episode of November 2016 in New Delhi?” Atmos. Environ. 222: 117125. https://doi.org/10.1016/j.atmosenv.2019.117125.
Ketzel, M., P. Louka, P. Sahm, E. Guilloteau, J.-F. Sini, and N. Moussiopoulos. 2002. “Intercomparison of numerical urban dispersion models— Part II: Street canyon in Hannover, Germany.” In Urban air quality—Recent advances, 603–613. Dordrecht, Netherlands: Springer.
Kim, K.-H., E. Kabir, and S. Kabir. 2015. “A review on the human health impact of airborne particulate matter.” Environ. Int. 74: 136–143. https://doi.org/10.1016/j.envint.2014.10.005. Dordrecht, Netherlands: Springer.
Klinmalee, A., K. Srimongkol, and N. T. Kim Oanh. 2009. “Indoor air pollution levels in public buildings in Thailand and exposure assessment.” Environ. Monit. Assess. 156 (1–4): 581–594. https://doi.org/10.1007/s10661-008-0507-z.
Kovács, A., Á Leelőssy, T. Tettamanti, D. Esztergár-Kiss, R. Mészáros, and I. Lagzi. 2021. “Coupling traffic originated urban air pollution estimation with an atmospheric chemistry model.” Urban Clim. 37 (May): 100868. https://doi.org/10.1016/j.uclim.2021.100868.
Leelőssy, Á, F. Molnár, F. Izsák, Á Havasi, I. Lagzi, and R. Mészáros. 2014. “Dispersion modeling of air pollutants in the atmosphere: A review.” Cent. Eur. J. Geosci. 6 (3): 257–278. https://doi.org/10.2478/s13533-012-0188-6.
Li, M., X. Qiu, J. Shen, J. Xu, B. Feng, Y. He, G. Shi, and X. Zhu. 2019. “CFD simulation of the wind field in Jinjiang city using a building data generalization method.” Atmosphere 10 (6): 326. https://doi.org/10.3390/atmos10060326.
Liu, W., J. Zhang, L. Zhang, B. J. Turpin, C. P. Weisel, and M. T. Morandi. 2006. “Estimating contributions of indoor and outdoor sources to indoor carbonyl concentrations in three urban areas of the United States.” Atmos. Environ. 40: 2202–2214. https://doi.org/10.1016/j.atmosenv.2005.12.005.
Liu, X., Z. Li, C. Liao, Q. Wang, A. Zhu, D. Li, Y. Li, and Z. Tang. 2015. “The development of ecological impact assessment in China.” Environ. Int. 85: 46–53. https://doi.org/10.1016/j.envint.2015.08.004.
Lueker, J., R. Bardhan, A. Sarkar, and L. Norford. 2020. “Indoor air quality among mumbai’s resettled populations: Comparing Dharavi slum to nearby rehabilitation sites.” Build. Environ. 167: 106419. https://doi.org/10.1016/j.buildenv.2019.106419.
Maier, C., J. B. Thatcher, V. Grover, and Y. K. Dwivedi. 2023. “Cross-sectional research: A critical perspective, use cases, and recommendations for IS research.” Int. J. Inf. Manage. 70: 102625. https://doi.org/10.1016/j.ijinfomgt.2023.102625.
Manisalidis, I., E. Stavropoulou, A. Stavropoulos, and E. Bezirtzoglou. 2020. “Environmental and health impacts of air pollution: A review.” Front. Public Health 8 (February): 1–13. https://doi.org/10.3389/fpubh.2020.00014.
Matawle, J. L., S. Pervez, A. Shrivastava, S. Tiwari, P. Pant, M. K. Deb, D. S. Bisht, and Y. F. Pervez. 2017. “PM2.5 pollution from household solid fuel burning practices in central India: 1. Impact on indoor air quality and associated health risks.” Environ. Geochem. Health 39 (5): 1045–1058. https://doi.org/10.1007/s10653-016-9871-8.
Meadow, J. F., et al. 2014. “Indoor airborne bacterial communities are influenced by ventilation, occupancy, and outdoor air source.” Indoor Air 24 (1): 41–48. https://doi.org/10.1111/ina.12047.
Minassian, D., and H. Kuper. 2012. “Cross-sectional studies.” Epidemiol. Eye Dis. 79–93. https://doi.org/10.1142/9781848166271_0003.
Ministry of Environment, Forest and Climate Change. 2009. “EIA manual.” Accessed September 30, 2023. https://environmentclearance.nic.in/report/User_eia_manuals.aspx.
Mirzaei, P. A. 2021. “CFD modeling of micro and urban climates: Problems to be solved in the new decade.” Sustainable Cities Soc. 69: 102839. https://doi.org/10.1016/j.scs.2021.102839.
Nagendra, S., M. Khare, S. Gulia, P. Vijay, V. S. Chithra, M. Bell, and A. Namdeo. 2012. “Application of ADMS and AERMOD models to study the dispersion of vehicular pollutants in urban areas of India and the United Kingdom.” WIT Trans. Ecol. Environ. 157: 3–12. https://doi.org/10.2495/AIR120011.
Nithya, N. S., K. Duraiswamy, and P. Gomathy. 2020. “A survey on clustering techniques in pattern recognition.” AIP Conf. Proc. 2261: 17–22. https://doi.org/10.1063/5.0017774.
Nomani, M. Z. M. 2010. Environment impact assessment laws. New Delhi, India: Satyam Law International.
NRC (National Research Council). 1989. Improving risk communication. Washington, DC: National Academy of Sciences.
Peng, Z., B. Zhang, D. Wang, X. Niu, J. Sun, H. Xu, J. Cao, and Z. Shen. 2024. “Science of the total environment application of machine learning in atmospheric pollution research : A state-of-art review.” Sci. Total Environ. 910: 168588. https://doi.org/10.1016/j.scitotenv.2023.168588.
Rama Krishna, T. V. B. P. S., M. K. Reddy, R. C., Reddy, and R. N. Singh. 2005. “Impact of an industrial complex on the ambient air quality: Case study using a dispersion model.” Atmos. Environ. 39 (29): 5395–5407. https://doi.org/10.1016/j.atmosenv.2005.06.003.
Riddle, A., D. Carruthers, A. Sharpe, C. McHugh, and J. Stocker. 2004. “Comparisons between FLUENT and ADMS for atmospheric dispersion modelling.” Atmos. Environ. 38 (7): 1029–1038. https://doi.org/10.1016/j.atmosenv.2003.10.052.
Romero, D., J. Olivero, R. Real, and J. C. Guerrero. 2019. “Applying fuzzy logic to assess the biogeographical risk of dengue in South America.” Parasites Vectors 12 (1): 1–13. https://doi.org/10.1186/s13071-019-3691-5.
Rzeszutek, M. 2019. “Parameterization and evaluation of the CALMET/CALPUFF model system in near-field and complex terrain—terrain data, grid resolution and terrain adjustment method.” Sci. Total Environ. 689: 31–46. https://doi.org/10.1016/j.scitotenv.2019.06.379.
Samad, A., S. Garuda, U. Vogt, and B. Yang. 2023. “Air pollution prediction using machine learning techniques—An approach to replace existing monitoring stations with virtual monitoring stations.” Atmos. Environ. 310 (April): 119987. https://doi.org/10.1016/j.atmosenv.2023.119987.
Sami, N., and S. Anand. 2015. “Manufacturing cities: Industrial policy and urban planning in India.” In Proc., RC21 Int. Conf. on The Ideal City: Between Myth and Reality. Representations, Policies, Contradictions and Challenges for Tomorrow’s Urban Life, 1–39. Italy: University of Urbino Carlo Bo.
Sarkar, A., and R. Bardhan. 2020a. “Improved indoor environment through optimised ventilator and furniture positioning: A case of slum rehabilitation housing, Mumbai India.” Front. Archit. Res. 9 (2): 350–369. https://doi.org/10.1016/j.foar.2019.12.001.
Sarkar, A., and R. Bardhan. 2020b. “Socio-physical liveability through socio-spatiality in low-income resettlement archetypes–A case of slum rehabilitation housing in Mumbai, India.” Cities 105: 102840. https://doi.org/10.1016/j.cities.2020.102840.
Scire, J. S., D. G. Strimaitis, and R. J. Yamartino. 2000. A user’s guide for the CALPUFF dispersion model. Concord, MA: Earth Tech.
Setia, M. S. 2016. “Methodology series module 3: Cross-sectional studies.” Indian J. Dermatol. 61 (3): 261–264. https://doi.org/10.4103/0019-5154.182410.
Smith, K. R., J. Samet, I. Romieu, and N. Bruce. 2000. “Indoor air pollution in developing countries and acute lower respiratory infections in children.” Thorax 55 (6): 518–532. https://doi.org/10.1136/thorax.55.6.518.
Takano, Y., and P. Moonen. 2013. “On the influence of roof shape on flow and dispersion in an urban street canyon.” J. Wind Eng. Ind. Aerodyn. 123: 107–120. https://doi.org/10.1016/j.jweia.2013.10.006.
Tong, N. Y. O., and D. Y. C. Leung. 2012. “Effects of building aspect ratio, diurnal heating scenario, and wind speed on reactive pollutant dispersion in urban street canyons.” J. Environ. Sci. 24 (12): 2091–2103. https://doi.org/10.1016/S1001-0742(11)60971-6.
UNDRR (UN Office for Disaster Risk Reduction). 2019. “UN office for disaster risk reduction.” Yearbook Int. Disaster Law Online 3(1), 238–273.
Usama, M., A. Rahman, Z. Khalid, M. Tahir, and M. Uppal. “Urban air quality measurements: A survey.” Preprint, submitted April 26, 2022. https://doi.org/10.20944/preprints202204.0232.v1.
US EPA. 2023. User’s Guide for the AMS/EPA Regulatory Model (AERMOD). https://gaftp.epa.gov/Air/aqmg/SCRAM/models/preferred/aermod/aermod_userguide.pdf
Vallero, D. A. 2007. Fundamentals of air pollution. 4th Ed. Durham, NC: Duke Univ.
Wang, F., P. Zheng, J. Dai, H. Wang, and R. Wang. 2019. “Fault tree analysis of the causes of urban smog events associated with vehicle exhaust emissions: A case study in Jinan, China.” Sci. Total Environ. 668: 245–253. https://doi.org/10.1016/j.scitotenv.2019.02.348.
Wang, P., et al. 2023. “Air pollution governance in China and India: Comparison and implications.” Environ. Sci. Policy 142: 112–120. https://doi.org/10.1016/j.envsci.2023.02.006.
Wang, X., and Z. Cheng. 2020. “Cross-Sectional studies: Strengths, weaknesses, and recommendations.” Chest 158 (1): S65–S71. https://doi.org/10.1016/j.chest.2020.03.012.
WHO (World Health Organization). 2016. Global report on urban health: Equitable, healthier cities for sustainable development. Geneva: WHO.
WHO (World Health Organization). 2022. “Air pollution.” In Compendium of WHO and other UN guidance on health and environment, 2022 update, 9–28. Geneva, Switzerland: WHO. (WHO/HEP/ECH/EHD/22.01). WHO Fact Sheet, 2019 (December), 5.
Zlateva, P., S. Tzvetkova, and D. Velev. 2018. “A fuzzy logic model for assessment of socio-economical consequences for household in case of power outage due to natural disasters.” IOP Conf Ser: Earth Environ. Sci. 151 (1): 012029. https://doi.org/10.1088/1755-1315/151/1/012029.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 29 • Issue 1 • January 2025
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jan 10, 2024
Accepted: May 13, 2024
Published online: Sep 16, 2024
Published in print: Jan 1, 2025
Discussion open until: Feb 16, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.