Sequestration of Paracetamol from Aqueous Solution Using Zinc Oxide/Polypyrrole Nanocomposite: Cost Analysis, Scale-Up Design, and Optimization of Process Parameters
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 27, Issue 4
Abstract
The production of pharmaceuticals in recent years has been racing to its peak due to the advancement of society that has led to a rise in a variety of diseases. Thus, disposal of these untreated pharmaceutical products coming from hospital wastewater and medicine manufacturing plants to the water system is causing a serious environmental threat. Therefore, this work mainly focuses on the removal of one of the widely used pharmaceuticals (e.g., paracetamol) with the help of adsorption technology from water using a metal oxide-based polymer, that is, zinc oxide/polypyrrole (ZnO/PPy). The fabricated adsorbent was characterized with X-ray diffraction, field emission gun–scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and Brunauer–Emmett–Teller analysis to identify its crystal formation, morphology, effective functional groups, and surface area, respectively. A pseudo-second-order kinetic model better suits this adsorption study compared with the pseudo-first-order and intraparticle diffusion model. Langmuir isotherm model fits better and provided a paracetamol adsorption capacity of 25.51 mg/g for ZnO/PPy. Monovalent anions (e.g., Cl−, , and ) have less impact on the removal efficiency of paracetamol (3.0% to ∼10.0%) as compared with divalent anion (e.g., S2−) in this adsorption process. The lab scale synthesis cost of ZnO/PPy was observed as ∼111 USD/kg whereas the cost associated with the removal process of paracetamol was found to be ∼4,347 USD/kg of paracetamol. Batch mode scale-up design indicated that the addition of ∼426 g of ZnO/PPy is required for 50 L of contaminated water treatment with 95% paracetamol removal efficiency.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research was funded by the Council of Scientific and Industrial Research (CSIR), Government of India, which resulted in these findings under Grant Agreement No. 22/0744/17/EMR-II. Bangalore Institute of Technology, India and SAIF-IIT Bombay, supported the SEM, EDX, FTIR, and BET surface area measurements, and for that, the authors are grateful.
References
Agarwal, S., I. Tyagi, V. K. Gupta, M. Dastkhoon, M. Ghaedi, F. Yousefi, and A. Asfaram. 2016. “Ultrasound-assisted adsorption of Sunset Yellow CFC dye onto Cu doped ZnS nanoparticles loaded on activated carbon using response surface methodology based on central composite design.” J. Mol. Liq. 219: 332–340. https://doi.org/10.1016/j.molliq.2016.02.100.
Alibaba E-Commerce Group. Accessed September 21, 2022. https://www.alibaba.com/showroom/online-shopping-india.html.
Arabi, M., M. Ghaedi, and A. Ostovan. 2017. “Water compatible molecularly imprinted nanoparticles as a restricted access material for extraction of hippuric acid, a biological indicator of toluene exposure, from human urine.” Microchim. Acta 184 (3): 879–887. https://doi.org/10.1007/s00604-016-2063-5.
Arabi, M., M. Ghaedi, A. Ostovan, J. Tashkhourian, and H. Asadallahzadeh. 2016. “Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software.” Ultrason. Sonochem. 33: 67–76. https://doi.org/10.1016/j.ultsonch.2016.04.022.
Banerjee, M., R. K. Basu, and S. K. Das. 2018. “Cr(VI) adsorption by a green adsorbent walnut shell: Adsorption studies, regeneration studies, scale-up design and economic feasibility.” Process Saf. Environ. Prot. 116: 693–702. https://doi.org/10.1016/j.psep.2018.03.037.
Bernal, V., A. Erto, L. Giraldo, and J. Moreno-Piraján. 2017. “Effect of solution pH on the adsorption of paracetamol on chemically modified activated carbons.” Molecules 22 (7): 1032. https://doi.org/10.3390/molecules22071032.
Bhowmik, M., K. Deb, A. Debnath, and B. Saha. 2017. “Mixed phase Fe2O3/Mn3O4 magnetic nanocomposite for enhanced adsorption of methyl orange dye: Neural network modeling and response surface methodology optimization.” Appl. Organomet. Chem. 32 (3): e4186. https://doi.org/10.1002/aoc.4186.
Bhowmik, M., J. Mawlong, and A. Debnath. 2022. “Application of magnetic nanocomposite in adsorptive remediation of synthetic dye-laden wastewater.” In Fundamentals and industrial applications of magnetic nanoparticles, edited by C. M. Hussain and K. K. Patankar, 621–651. Sawston, UK: Woodhead Publishing.
Bhugul, V. T., and G. N. Choudhary. 2015. “Synthesis and studies on nanocomposites of polypyrrole-Al- doped zinc oxide nanoparticles.” Int. J. Sci. Res. Publ. 5 (1): 1–5.
Bose, S., B. K. Tripathy, A. Debnath, and M. Kumar. 2021. “Boosted sono-oxidative catalytic degradation of Brilliant green dye by magnetic MgFe2O4 catalyst: Degradation mechanism, assessment of bio-toxicity and cost analysis.” Ultrason. Sonochem. 75: 105592.
Carneiro Pires, B., F. V. Avelar Dutra, T. Aparecida Nascimento, and K. Bastos Borges. 2021. “Removal of pharmaceuticals from aqueous samples by adsorption using pristine polypyrrole as adsorbent: Kinetic, isothermal and thermodynamic studies.” Int. J. Environ. Anal. Chem. https://doi.org/10.1080/03067319.2021.1938019.
Correia, B., R. Freitas, E. Figueira, A. M. Soares, and B. Nunes. 2015. “Oxidative effects of the pharmaceutical drug paracetamol on the edible clam Ruditapesphilippinarum under different salinities.” Comp. Biochem. Physiol. C Toxicol. Pharmacol 179: 116–124. https://doi.org/10.1016/j.cbpc.2015.09.006.
Das, P., A. Debnath, and B. Saha. 2020. “Ultrasound-assisted enhanced and rapid uptake of anionic dyes from the binary system onto MnFe2O4/polyaniline nanocomposite at neutral pH.” Appl. Organomet. Chem. 34 (8): e5711.
Deb, A., A. Debnath, and B. Saha. 2021. “Sono-assisted enhanced adsorption of Eriochrome Black-T dye onto a novel polymeric nanocomposite: Kinetic, isotherm, and response surface methodology optimization.” J. Dispersion Sci. Technol. 42 (1): 1579–1592. https://doi.org/10.1080/01932691.2020.1775093.
Deb, A., M. Kamani, A. Debnath, K. L. Bhowmik, and B. Saha. 2019. “Ultrasonic assisted enhanced adsorption of methyl orange dye onto polyaniline impregnated zinc oxide nanoparticles: Kinetic, isotherm and optimization of process parameters.” Ultrason. Sonochem. 54: 290–301. https://doi.org/10.1016/j.ultsonch.2019.01.02.
Debnath, P., and N. K. Mondal. 2020. “Effective removal of congo red dye from aqueous solution using biosynthesized zinc oxide nanoparticles.” Environ. Nanotechnol. Monit. Manage. 14: 100320. https://doi.org/10.1016/j.enmm.2020.100320.
Dehaghi, S. M., B. Rahmanifar, A. M. Moradi, and P. A. Azar. 2014. “Removal of permethrin pesticide from water by chitosan–zinc oxide nanoparticles composite as an adsorbent.” J. Saudi Chem. Soc. 18 (4): 348–355. https://doi.org/10.1016/j.jscs.2014.01.004.
Dey, S., and A. K. Kar. 2022. “Effect of Forster resonance energy transfer on the photoluminescence of ZnO-PPy composite.” J. Sol-Gel Sci. Technol. 102: 679–687. https://doi.org/ 10.1007/s10971-021-05621-y.
Dhiman, N., and N. Sharma. 2019. “Removal of pharmaceutical drugs from binary mixtures by use of ZnO nanoparticles.” Environ. Technol. Innovation 15: 100392. https://doi.org/10.1016/j.eti.2019.100392.
Dong, L., J. Liang, Y. Li, S. Hunang, Y. Wei, X. Bai, Z. Jin, M. Zhang, and J. Qu. 2018. “Effect of coexisting ions on Cr(VI) adsorption onto surfactant modified Auriculariaauricula spent substrate in aqueous solution.” Ecotoxicol. Environ. Saf. 166: 390–400. https://doi.org/10.1016/j.ecoenv.2018.09.097.
Dotto, G. L., and G. McKay. 2020. “Current scenario and challenges in adsorption for water treatment.” J. Environ. Chem. Eng. 8 (4): 103988. https://doi.org/10.1016/j.jece.2020.103988.
Ghosh, I., S. Kar, T. Chatterjee, N. Bar, and S. K. Das. 2021. “Adsorptive removal of Safranin-O dye from aqueous medium using coconut coir and its acid-treated forms: Adsorption study, scale-up design, MPR and GA-ANN modelling.” Sustainable Chem. Pharm. 19: 100374. https://doi.org/10.1016/j.scp.2021.100374.
Haro, N. K., I. V. J. Dávila, K. G. P. Nunes, M. A. E. de Franco, N. R. Marcilio, and L. A. Féris. 2021. “Kinetic, equilibrium and thermodynamic studies of the adsorption of paracetamol in activated carbon in batch model and fixed-bed column.” Appl. Water Sci. 11 (2): 38. https://doi.org/10.1007/s13201-020-01346-5.
Huguet, M., V. Simon, and H. Gallard. 2014. “Transformation of paracetamol into 1,4-benzoquinone by a manganese oxide bed filter.” J. Hazard. Mater. 271: 245–251. https://doi.org/10.1016/j.jhazmat.2014.02.017.
Jamshidi, M., M. Ghaedi, K. Dashtian, S. Hajati, and A. A. Bazrafshan. 2016. “Sonochemical assisted hydrothermal synthesis of ZnO: Cr nanoparticles loaded activated carbon for simultaneous ultrasound-assisted adsorption of ternary toxic organic dye: Derivative spectrophotometric, optimization, kinetic and isotherm study.” Ultrason. Sonochem. 32: 119–131. https://doi.org/10.1016/j.ultsonch.2016.03.004.
Joshi, N. C., S. Malik, and P. Gururani. 2021. “Utilization of polypyrrole/ZnO nanocomposite in the adsorptive removal of Cu2+, Pb2+ and Cd2+ ions from wastewater.” Lett. Appl. NanoBioSci. 10 (3): 2339–2351.
Lung, I., M. L. Soran, A. Stegarescu, O. Opris, S. Gutoiu, C. Leostean, M. D. Lazar, I. Kacso, T. D. Silipas, and A. S. Porav. 2021. “Evaluation of CNT-COOH/MnO2/Fe3O4 nanocomposite for ibuprofen and paracetamol removal from aqueous solutions.” J. Hazard. Mater. 403: 123528. https://doi.org/10.1016/j.jhazmat.2020.123528.
Mohammed, A. A., and S. L. Kareem. 2019. “Adsorption of tetracycline from wastewater by using Pistachio shell coated with ZnO nanoparticles: Equilibrium, kinetic and isotherm studies.” Alexandria Eng. J. 58 (3): 917–928. https://doi.org/10.1016/j.aej.2019.08.006.
Montes-Grajales, D., M. Fennix-Agudelo, and W. Miranda-Castro. 2017. “Occurrence of personal care products as emerging chemicals of concern in water resources: A review.” Sci. Total Environ. 595: 601–614. https://doi.org/10.1016/j.scitotenv.2017.03.286.
Mukhopadhyay, A., B. K. Tripathy, A. Debnath, and M. Kumar. 2021. “Enhanced persulfate activated sono-catalytic degradation of brilliant green dye by magnetic CaFe2O4nanoparticles: Degradation pathway study, assessment of bio-toxicity and cost analysis.” Surf. Interfaces 26: 101412. https://doi.org/10.1016/j.surfin.2021.101412.
Nunes, B., S. C. Antunes, J. Santos, L. Martins, and B. B. Castro. 2014. “Toxic potential of paracetamol to freshwater organisms: A headache to environmental regulators?.” Ecotoxicol. Environ. Saf. 107: 178–185. https://doi.org/10.1016/j.ecoenv.2014.05.027.
Pauletto, P. S., S. F. Lütke, G. L. Dotto, and N. P. G. Salau. 2021. “Adsorption mechanisms of single and simultaneous removal of pharmaceutical compounds onto activated carbon: Isotherm and thermodynamic modelling.” J. Mol. Liq. 336: 116203. https://doi.org/10.1016/j.molliq.2021.116203.
Ramesan, M. T., and V. Santhi. 2017. “In situ synthesis, characterization, conductivity studies of polypyrrole/silver doped zinc oxide nanocomposites and their application for ammonia gas sensing.” J. Mater. Sci.: Mater. Electron. 28 (24): 18804–18814. https://doi.org/10.1007/s10854-017-7830-5.
Rudra Paul, S., N. H. Singh, and A. Debnath. 2022. “Quick and enhanced separation of Eosin Yellow dye from aqueous solution by FeCl3 interaction: Thermodynamic study and treatment cost analysis.” Int. J. Environ. Anal. Chem. https://doi.org/10.1080/03067319.2022.2076218.
Rzymski, P., A. Drewek, and P. Klimaszyk. 2017. “Pharmaceutical pollution of aquatic environment: An emerging and enormous challenge.” Limnol. Rev. 17 (2): 97. https://doi.org/10.1515/limre-2017-0010.
Saha, B., A. Debnath, and B. Saha. 2022a. “Fabrication of PANI@ Fe–Mn–Zr hybrid material and assessments in sono-assisted adsorption of methyl red dye: Uptake performance and response surface optimization.” J. Indian Chem. Soc. 99 (9): 100635. https://doi.org/10.1016/j.jics.2022.100635.
Saha, B., A. Debnath, and B. Saha. 2022b. “Evaluation of Fe-Mn-Zr trimetal oxide/polyaniline nanocomposite as potential adsorbent for abatement of toxic dye from aqueous solution.” In Polymer technology in dye-containing wastewater. STPPMC Book series, edited by A. Khadir and S. S. Muthu, 15–37. Singapore: Springer.
Sani, H. A., M. B. Ahmad, and T. A. Saleh. 2016. “Synthesis of zinc oxide/talc nanocomposite for enhanced lead adsorption from aqueous solutions.” RSC Adv. 6: 108819–108827. https://doi.org/10.1039/C6RA24615J.
Silvestri, S., C. D. Ferreira, V. Oliveira, J. M. T. B. Varejão, J. A. Labrincha, and D. M. Tobaldi. 2019. “Synthesis of ZnO-PPy composite used as photocatalyst for the degradation of diclofenac under simulated solar irradiation.” J. Photochem. Photobiol., A 375: 261–269. https://doi.org/10.1016/j.jphotochem.2019.02.034.
Streit, A. F., G. C. Collazzo, S. P. Druzian, R. S. Verdi, E. L. Foletto, L. F. Oliveira, and G. L. Dotto. 2021. “Adsorption of ibuprofen, ketoprofen, and paracetamol onto activated carbon prepared from effluent treatment plant sludge of the beverage industry.” Chemosphere 262: 128322. https://doi.org/10.1016/j.chemosphere.2020.128322.
Tripathy, B. K., and M. Kumar. 2019. “Sequential coagulation/flocculation and microwave-persulfate processes for landfill leachate treatment: Assessment of bio-toxicity, effect of pretreatment and cost-analysis.” Waste Manage. (Oxford) 85: 18–29. https://doi.org/10.1016/j.wasman.2018.12.014.
Tripathy, B. K., S. Kumar, M. Kumar, and A. Debnath. 2020. “Microwave induced catalytic treatment of brilliant green dye with carbon doped zinc oxide nanoparticles: Central composite design, toxicity assessment and cost analysis.” Environ. Nanotechnol. Monit. Manage. 14: 100361. https://doi.org/10.1016/j.enmm.2020.100361.
Tripathy, B. K., G. Ramesh, A. Debnath, and M. Kumar. 2019. “Mature landfill leachate treatment using sonolytic-persulfate/hydrogen peroxide oxidation: Optimization of process parameters.” Ultrason. Sonochem. 54: 210–219. https://doi.org/10.1016/j.ultsonch.2019.01.036.
Vinayagam, R., S. Pai, G. Murugesan, T. Varadavenkatesan, S. Narayanasamy, and R. Selvaraj. 2022. “Magnetic activated charcoal/Fe2O3 nanocomposite for the adsorptive removal of 2,4-Dichlorophenoxyacetic acid (2,4-D) from aqueous solutions: Synthesis, characterization, optimization, kinetic and isotherm studies.” Chemosphere 286: 131938. https://doi.org/10.1016/j.chemosphere.2021.131938.
Vishnu, P. V., and S. Narayanasamy. 2022. “Effective removal of pharmaceutical contaminants ibuprofen and sulfamethoxazole from water by Corn starch nanoparticles: An ecotoxicological assessment.” Environ. Toxicol. Pharmacol. 94: 103930. https://doi.org/10.1016/j.etap.2022.103930.
Wang, J., and X. Guo. 2020. “Adsorption kinetic models: Physical meanings, applications, and solving methods.” J. Hazard. Mater. 390: 122156. https://doi.org/10.1016/j.jhazmat.2020.122156.
Zafar, M. N., Q. Dar, F. Nawaz, M. N. Zafar, M. Iqbal, and M. F. Nazar. 2019. “Effective adsorptive removal of azo dyes over spherical ZnO nanoparticles.” J. Mater. Res. Technol. 8 (1): 713–725. https://doi.org/10.1016/j.jmrt.2018.06.002.
Zhang, M., L. Chang, Y. Zhao, and Z. Yu. 2019. “Fabrication of zinc oxide/polypyrrole nanocomposites for brilliant green removal from aqueous phase.” Arabian J. Sci. Eng. 44: 111–121. https://doi.org/10.1007/s13369-018-3258-3.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 27 • Issue 4 • October 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 14, 2022
Accepted: Mar 10, 2023
Published online: Aug 3, 2023
Published in print: Oct 1, 2023
Discussion open until: Jan 3, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.