Indirect Aqueous Mineral Carbonation of Samples of Linz–Donawitz Slag from the Steel Industry in Eastern India
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 27, Issue 4
Abstract
In this study, aqueous mineral carbonation of Linz–Donawitz (LD) slag waste from Rourkela, Bokaro, and Tata steel industries was undertaken at a room temperature of 30°C and elevated CO2 pressure (9 bar) to assess the feasibility and quantification of carbonation primarily as CaCO3. Also, the effect of physical, i.e., sonication (40 kHz) and chemical activation (1 M NH4Cl, CH3COONH4, and NH4NO3) on calcium dissolution/extraction and its carbonation was compared with control, i.e., without chemical activators. Calcium dissolution from LD slag samples (solid:liquid ratio 1 g/50 mL) showed a significant increase in all samples, i.e., 23.92, 25.60, and 20.90 mg/L for Rourkela, Bokaro, and Tata LD slag samples, respectively. XRD and FTIR analyses of carbonated LD slag residue confirmed calcite formation. Thermal gravimetric analysis/differential scanning calorimetry analysis of carbonated samples showed a relatively high degree of carbonation for the Rourkela, Bokaro, and Tata LD slag samples with chemical activators, CH3COONH4 (56%), NH4NO3 (55%), and control (48%), respectively. The present work estimates CO2 capture in LD slag samples to be 0.126, 0.084, and 0.153 kg/kg, respectively. The research findings highlight the scope of mineral carbonation of LD slag samples at relatively low pressure and temperature using physical and chemical activators.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The authors confirm that the data that support the findings of this research study are available in the published article.
Acknowledgments
The authors express sincere thanks to the competent authorities of Rourkela, Bokaro, and Tata steel plants for the supply of LD slag samples. The authors extend their gratitude to Prof. A. K. Singh, Former Head, Environmental Science and Engineering Department, IIT (ISM), Dhanbad, and Dr. C. R. Panda, Former Head, Environment, and Sustainability Department, CSIR-IMMT, Bhubaneswar, for providing guidance and the necessary support. The authors also wish to acknowledge the instrument facilities provided by IIT (ISM), Dhanbad, and the CSIR-IMMT Environment and Sustainability Department pressure pot reactor facility for scientific and technical assistance.
References
Adewuyi, Y. G. 2001. “Sonochemistry: Environmental science and engineering applications.” Ind. Eng. Chem. Res. 40 (22): 4681–4715. https://doi.org/10.1021/ie010096l.
Bertz, M. 2008. Emission reductions for stabilisation and mitigation potentials. AWG-KP workshop. Poznan, Poland: Intergovernmental Panel of Climate Change.
Bilen, M., M. Altiner, and M. Yildirim. 2018. “Evaluation of steelmaking slag for CO2 fixation by leaching-carbonation process.” Part. Sci. Technol. 36 (3): 368–377. https://doi.org/10.1080/02726351.2016.1267285.
Chand, S., B. Paul, and M. Kumar. 2016a. “A comparative study of physicochemical and mineralogical properties of LD slag from some selected steel plants in India.” J. Environ. Sci. Technol. 9 (1): 75. https://doi.org/10.3923/jest.2016.75.87.
Chand, S., B. Paul, and M. Kumar. 2016b. “Sustainable approaches for LD slag waste management in steel industries: A review.” Metallurgist 60 (1): 116–128. https://doi.org/10.1007/s11015-016-0261-3.
Chand, S., B. Paul, and M. Kumar. 2017. “Short-term leaching study of heavy metals from LD slag of important steel industries in Eastern India.” J. Mater. Cycles Waste Manage. 19 (2): 851–862. https://doi.org/10.1007/s10163-016-0486-z.
Chang, E.-E., S.-Y. Pan, Y.-H. Chen, H.-W. Chu, C.-F. Wang, and P.-C. Chiang. 2011. “CO2 sequestration by carbonation of steelmaking slags in an autoclave reactor.” J. Hazard. Mater. 195: 107–114. https://doi.org/10.1016/j.jhazmat.2011.08.006.
Chang, E.-E., S.-Y. Pan, Y.-H. Chen, C.-S. Tan, and P.-C. Chiang. 2012. “Accelerated carbonation of steelmaking slags in a high-gravity rotating packed bed.” J. Hazard. Mater. 227–228: 97–106. https://doi.org/10.1016/j.jhazmat.2012.05.021.
Chang, J., Y. Fang, and J. Wang. 2015. “CO2 sequestration by solid residues carbonation for building materials preparation.” Int. J. Adv. Agric. Environ. Eng. 2: 49–53.
Citaristi, I. 2022. “International Energy Agency—IEA.” In The Europa directory of international organizations 2022, 701–702. Routledge, New York: Europa Publications.
De Crom, K., Y. W. Chiang, T. Van Gerven, and R. M. Santos. 2015. “Purification of slag-derived leachate and selective carbonation for high-quality precipitated calcium carbonate synthesis.” Chem. Eng. Res. Des. 104: 180–190. https://doi.org/10.1016/j.cherd.2015.07.029.
Ehlig-Economides, C., and M. J. Economides. 2010. “Sequestering carbon dioxide in a closed underground volume.” J. Pet. Sci. Eng. 70 (1–2): 123–130. https://doi.org/10.1016/j.petrol.2009.11.002.
Eloneva, S. 2010. “Reduction of CO2 emissions by mineral carbonation: steelmaking slags as raw material with a pure calcium carbonate end product.” Ph.D. thesis, Aalto Univ. School of Science and Technology.
Eloneva, S., E.-M. Puheloinen, J. Kanerva, A. Ekroos, R. Zevenhoven, and C.-J. Fogelholm. 2010. “Co-utilisation of CO2 and steelmaking slags for production of pure CaCO3—Legislative issues.” J. Cleaner Prod. 18: 1833–1839. https://doi.org/10.1016/j.jclepro.2010.07.026.
Eloneva, S., A. Said, C.-J. Fogelholm, and R. Zevenhoven. 2012. “Preliminary assessment of a method utilizing carbon dioxide and steelmaking slags to produce precipitated calcium carbonate.” Appl. Energy 90 (1): 329–334. https://doi.org/10.1016/j.apenergy.2011.05.045.
Eloneva, S., S. Teir, H. Revitzer, J. Salminen, A. Said, C. J. Fogelholm, and R. Zevenhoven. 2009. “Reduction of CO2 emissions from steel plants by using steelmaking slags for production of marketable calcium carbonate.” Steel Res. Int. 80 (6): 415–421. https://doi.org/10.2374/SRI09SP028.
Friedlingstein, P., et al. 2022. “Global carbon budget 2021.” Earth Syst. Sci. Data 14 (4): 1917–2005. https://doi.org/10.5194/essd-14-1917-2022.
Global Energy Review. 2021. “Assessing the effects of economic recoveries on global energy demand and CO2 emissions in 2021.” Accessed November 23, 2022. https://iea.blob.core.windows.net/assets/d0031107-401d-4a2f-a48b9eed19457335/GlobalEnergyReview2021.pdf.
Hagenson, L. C., and L. K. Doraiswamy. 1998. “Comparison of the effects of ultrasound and mechanical agitation on a reacting solid–liquid system.” Chem. Eng. Sci. 53 (1): 131–148. https://doi.org/10.1016/S0009-2509(97)00193-0.
He, L., D. Yu, W. Lv, J. Wu, and M. Xu. 2013. “A novel method for CO2 sequestration via indirect carbonation of coal fly ash.” Ind. Eng. Chem. Res. 52 (43): 15138–15145. https://doi.org/10.1021/ie4023644.
Huijgen, W. J. J., and R. N. J. Comans. 2006. “Carbonation of steel slag for CO2 sequestration: Leaching of products and reaction mechanisms.” Environ. Sci. Technol. 40 (8): 2790–2796. https://doi.org/10.1021/es052534b.
Kodama, S., T. Nishimoto, N. Yamamoto, K. Yogo, and K. Yamada. 2008. “Development of a new pH-swing CO2 mineralization process with a recyclable reaction solution.” Energy 33 (5): 776–784. https://doi.org/10.1016/j.energy.2008.01.005.
Lackner, K. S., C. H. Wendt, D. P. Butt, E. L. Joyce Jr., and D. H. Sharp. 1995. “Carbon dioxide disposal in carbonate minerals.” Energy 20 (11): 1153–1170. https://doi.org/10.1016/0360-5442(95)00071-N.
Lee, E., P. R. Rout, Y. Kyun, and J. Bae. 2020. “Process optimization and energy analysis of vacuum degasifier systems for the simultaneous removal of dissolved methane and hydrogen sulfide from anaerobically treated wastewater.” Water Res. 182: 115965. https://doi.org/10.1016/j.watres.2020.115965.
Marsh, B. K., and R. L. Day. 1988. “Pozzolanic and cementitious reactions of fly ash in blended cement pastes.” Cem. Concr. Res. 18 (2): 301–310. https://doi.org/10.1016/0008-8846(88)90014-2.
Mason, T. J. 2000. “Large scale sonochemical processing: Aspiration and actuality.” Ultrason. Sonochem. 7 (4): 145–149. https://doi.org/10.1016/S1350-4177(99)00041-3.
Mattila, H. P., I. Grigaliūnaitė, A. Said, C. J. Fogelholm, and R. Zevenhoven. 2012. “Production of papermaking grade calcium carbonate from steelmaking slag–product quality and development of a larger scale process.” In Proc., 4th Int. Conf. on Process Development in Iron and Steelmaking SCANMET IV. Lulea, Sweden: Swerea MEFOS.
Mun, M., and H. Cho. 2013. “Mineral carbonation for carbon sequestration with industrial waste.” Energy Procedia 37: 6999–7005. https://doi.org/10.1016/j.egypro.2013.06.633.
Said, A., H. P. Mattila, C. J. Fogelholm, and R. Zevenhoven. 2012. “Effect of steelmaking slag properties to the extraction of calcium by using ammonium salts.” In Proc., Int. Conf. on Applied Energy. Suzhou, China: ICAE.
Said, A., H.-P. Mattila, M. Järvinen, and R. Zevenhoven. 2013. “Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2.” Appl. Energy 112: 765–771. https://doi.org/10.1016/j.apenergy.2012.12.042.
Said, A., O. Mattila, S. Eloneva, and M. Järvinen. 2015. “Enhancement of calcium dissolution from steel slag by ultrasound.” Chem. Eng. Process. 89: 1–8. https://doi.org/10.1016/j.cep.2014.12.008.
Seifritz, W. 1990. “CO2 disposal by means of silicates.” Nature 345 (6275): 486–486. https://doi.org/http://dx.doi.org/10.1038/345486b0.
Shao, Y., and S. Monkman. 2006. “Carbonated cementitious materials and their role in CO2 sequestration.” In Measuring, monitoring and modeling concrete properties, edited by M. S. Konsta-Gdoutos, 353–359. Dordrecht: Springer. ISBN: 978-1-4020-5103-6.
Singh, B. R., and O. Singh. 2012. “Global trends of fossil fuel reserves and climate change in the 21st century.” In Fossil fuel and the environment, edited by S. Khan, 167–192. London: IntechOpen.
Singh, G., R. Kumar, and P. Kumar. 2007. “Assessment of trace elements leaching of coal combustion residues from Bokaro Thermal Power Station.” J. Environ. Sci. Eng. 49 (1): 77–86. PMID: 18472566.
Sridhar, P., R. D. Tyagi, P. Bhunia, P. R. Rout, T. C. Zhang, and R. Y. Surampalli. 2021. “Greenhouse gas emissions in sludge ultrasonication followed by anaerobic digestion processes.” Bioresour. Technol. 341: 125754. https://doi.org/10.1016/j.biortech.2021.125754.
Sun, Y., M.-S. Yao, J.-P. Zhang, and G. Yang. 2011. “Indirect CO2 mineral sequestration by steelmaking slag with NH4Cl as leaching solution.” Chem. Eng. J. 173 (2): 437–445. https://doi.org/10.1016/j.cej.2011.08.002.
Teir, S. 2008. Fixation of carbon dioxide by producing carbonates from minerals and steelmaking slags. Helsinki, Finland: Teknillinen Korkeakoulu. ISBN 978-951-22-9353-7.
Thompson, L. H., and L. K. Doraiswamy. 1999. “Sonochemistry: Science and engineering.” Ind. Eng. Chem. Res. 38: 1215–1249. https://doi.org/10.1021/ie9804172.
Tu, M., H. Zhao, Z. Lei, L. Wang, D. Chen, H. Yu, and T. Qi. 2015. “Aqueous carbonation of steel slag: A kinetics study.” ISIJ Int. 55 (11): 2509–2514. https://doi.org/10.2355/isijinternational.ISIJINT-2015-142.
Ukwattage, N. L., P. G. Ranjith, and S. H. Wang. 2013. “Investigation of the potential of coal combustion fly ash for mineral sequestration of CO2 by accelerated carbonation.” Energy 52: 230–236. https://doi.org/10.1016/j.energy.2012.12.048.
Xu, A.-j., H.-n. Zhang, Y. Yang, J. Cui, D.-f. He, and N.-y. Tian. 2012. “Optimization study of calcium leaching from steelmaking slag.” J. Iron. Steel Res. Int. 19 (4): 34–38. https://doi.org/10.1016/S1006-706X(12)60084-3.
Yadav, S., and A. Mehra. 2017. “Dissolution of steel slags in aqueous media.” Environ. Sci. Pollut. Res. 24 (19): 16305–16315. https://doi.org/ 10.1007/s11356-017-9036-z.
Zhongming, Z., L. Linong, Y. Xiaona, Z. Wangqiang, and L. Wei. 2021. Greenhouse gas bulletin: Another year another record. Geneva: World Meteorological Organization.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 1, 2022
Accepted: Feb 11, 2023
Published online: Aug 3, 2023
Published in print: Oct 1, 2023
Discussion open until: Jan 3, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.