Exploration of the Circumferential Velocity Structure Induced by Guide Vane-Type Spiral Flow Generators in a Pipe Flow
Publication: Journal of Hydraulic Engineering
Volume 149, Issue 12
Abstract
Incorporating a guide vane-type spiral flow generator can effectively resolve particle deposition issues during long-distance pipeline conveyance. Combining model experiments and computational fluid dynamics (CFD) results under different guide vane height conditions, the paper investigated the structure of the circumferential velocity and the generated rotational effects of the guide vane-type spiral flow generator. Due to the combined effects of the guide vane constraint and water inertia, an envelope surface with a zero circumferential velocity exists along the inner edge of the guide vanes and in the direction of water flow. The envelope surface divides the circumferential flow velocity distribution into internal negative and external positive velocity zones. This paper discovered that the distribution of the envelope surface in the radial and axial directions is affected by both the height of the guide vanes and the Reynolds number. The rotational intensity of the fluid particles around the axis was characterized by the circumferential moment of momentum. When the relative height of the guide vane was 0.35, the highest percentage of circumferential flow velocity in the flow field was reached, while the rotational kinetic energy conversion efficiency was maximum.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors thank the College of Water Science and Engineering of Taiyuan University of Technology for providing the experimental site and the tools to process the experimental data. This work was supported by the National Natural Science Foundation of China (Grant No. 51179116), the Natural Science Foundation of Shanxi Province (Grant No. 202303021211141), and the Shanxi Province Science Foundation for Youths (Grant No. 20210302124454).
References
Adrian, R. J. 1991. “Particle-imaging techniques for experimental fluid mechanics.” Annu. Rev. Fluid Mech. 23 (1): 261–304. https://doi.org/10.1146/annurev.fl.23.010191.001401.
Banasiak, R., and R. Verhoeven. 2008. “Transport of sand and partly cohesive sediments in a circular pipe run partially full.” J. Hydraul. Eng. 134 (2): 216–224. https://doi.org/10.1061/(ASCE)0733-9429(2008)134:2(216).
Beér, J. M. 1974. “Combustion aerodynamics.” In Combustion technology, 61–89. Philadelphia: Elsevier.
Bhuiyan, F., R. D. Hey, and P. R. Wormleaton. 2010. “Bank-attached vanes for bank erosion control and restoration of river meanders.” J. Hydraul. Eng. 136 (9): 583–596. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000217.
Brito, M., P. Sanches, R. M. L. Ferreira, and D. I. C. Covas. 2017. “Experimental study of the transient flow in a coiled pipe using PIV.” J. Hydraul. Eng. 143 (3): 04016087. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001253.
Chanson, H. 2009. Applied hydrodynamics: An introduction to ideal and real fluid flows. Leiden, Netherlands: CRC Press.
Chanson, H. 2020. “Low-velocity zone in smooth pipe culvert with and without streamwise rib for fish passage.” J. Hydraul. Eng. 146 (9): 04020059. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001789.
Ciocan, T., R. Susan-Resiga, and S. Muntean. 2016. “Modelling and optimization of the velocity profiles at the draft tube inlet of a Francis turbine within an operating range.” J. Hydraul. Res. 54 (1): 74–89. https://doi.org/10.1080/00221686.2015.1119763.
Coleman, H. W., and W. G. Steele. 1995. “Engineering application of experimental uncertainty analysis.” AIAA J. 33 (10): 1888–1896. https://doi.org/10.2514/3.12742.
Dong, X., X. Jin, P. Li, Q. Bi, M. Gui, and T. Wang. 2020. “Experimental research on heat transfer and flow resistance properties in spiral twisted tube heat exchanger.” Appl. Therm. Eng. 176 (Jul): 115397. https://doi.org/10.1016/j.applthermaleng.2020.115397.
Fan, J.-Y., Y. Zhang, and D.-Z. Wang. 2009. “Experimental study on the vortex formation and entrainment characteristics for a round transverse jet in shallow water.” J. Hydrodyn. Ser. B 21 (3): 386–393. https://doi.org/10.1016/S1001-6058(08)60161-4.
Flagan, R. C., and J. H. Seinfeld. 2012. Fundamentals of air pollution engineering. North Chelmsford, MA: Courier Corporation.
Ji, J., P. Ge, and W. Bi. 2016. “Numerical investigation of flow and heat transfer performances of horizontal spiral-coil pipes.” J. Hydrodyn. 28 (4): 576–584. https://doi.org/10.1016/S1001-6058(16)60661-3.
Katopodes, N. D. 2019. “Turbulent flow.” Chap. 8 in Free-surface flow, 566–650. Oxford, UK: Butterworth-Heinemann.
Kim, J., and J. Baik. 2004. “A numerical study of the effects of ambient wind direction on flow and dispersion in urban street canyons using the RNG turbulence model.” Environ. Fluid Mech. 38 (19): 3039–3048. https://doi.org/10.1016/j.atmosenv.2004.02.047.
Li, H., and Y. Tomita. 1994. “Characteristics of swirling flow in a circular pipe.” J. Fluids Eng. 116 (2): 370–373. https://doi.org/10.1115/1.2910283.
Li, H., and Y. Tomita. 1996. “An experimental study of swirling flow pneumatic conveying system in a horizontal pipeline.” J. Fluids Eng. 118 (3): 526–530. https://doi.org/10.1115/1.2817790.
Li, Y., Y. Gao, X. Jia, Y. Lu, X. Sun, and J. Li. 2020. “Velocity characteristics of spiral flow in downstream section of guide vane cyclone.” [In Chinese.] J. Drain. Irrig. Machinery Eng. 38 (8): 807–813. https://doi.org/10.3969 /j.issn.1674-8530.19.0222.
Li, Y., X. Sun, and R. Wang. 2011a. “Characteristics of velocity field and vorticity field in generator.” [In Chinese.] J. Drain. Irrig. Machinery Eng. 29 (2): 155–159. https://doi.org/10.3969/j.issn.1674-8530.2011.02.013.
Li, Y., X. Sun, and Q. Yan. 2011b. “Experimental study on the characteristics of spiral flow in a local generator.” [In Chinese.] J. Hydroelectric Eng. 30 (2): 72–77.
Lin, Y., P. Lei, and X. D. Zhang. 2013. “The analysis and simulation of granule concentration distribution in cross section of spiral slurry pipeline.” Appl. Mech. Mater. 268 (Mar): 1123–1127. https://doi.org/10.4028/www.scientific.net/AMM.268-270.1123.
Matoušek, V. 2009. “Concentration profiles and solids transport above stationary deposit in enclosed conduit.” J. Hydraul. Eng. 135 (12): 1101–1106. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000113.
May, R. W. P. 2003. “Preventing sediment deposition in inverted sewer siphons.” J. Hydraul. Eng. 129 (4): 283–290. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:4(283).
Moffat, R. J. 1988. “Describing the uncertainties in experimental results.” Exp. Therm. Fluid Sci. 1 (1): 3–17. https://doi.org/10.1016/0894-1777(88)90043-X.
Qi, J., J. Yin, F. Yan, P. Liu, T. Wang, and C. Chen. 2021. “Liquid–solid flow characteristics in vertical swirling hydraulic transportation with tangential jet inlet.” Adv. Powder Technol. 9 (10): 1091. https://doi.org/10.3390/jmse9101091.
Rao, Y., L. Li, S. Wang, S. Zhao, and S. Zhou. 2021. “Numerical simulation study on flow laws and heat transfer of gas hydrate in the spiral flow pipeline with long twisted band.” Entropy 23 (4): 489. https://doi.org/10.3390/e23040489.
Salama, A. 2021. “Velocity profile representation for fully developed turbulent flows in pipes: A modified power law.” Fluids 6 (10): 369. https://doi.org/10.3390/fluids6100369.
Schultz, M. P., and K. A. Flack. 2013. “Reynolds-number scaling of turbulent channel flow.” Phys. Fluids 25 (2): 025104. https://doi.org/10.1063/1.4791606.
Sun, X. 2000. “Experimental research on the hydraulic characteristics and particle suspended mechanics in spiral pipe flow with horizontal axis.” Ph.D. thesis, Institute of Water Resources and Hydro-electric Engineering, Xi’an Univ. of Technology.
Sun, X., Q. Yan, and P. Wu. 2000. “Research on the structure parameters and resistance of spiral flow generator in circle pipe.” [In Chinese.] Fluid Machinery 28 (10): 7–9.
Tang, Y.-F., M.-C. Tian, and G.-M. Zhang. 2012. “PIV experimental research of flow structure in rectangular channel with transversely placed spiral coil insert.” J. Hydrodyn. 24 (4): 518–525. https://doi.org/10.1016/S1001-6058(11)60273-4.
Theyab, M. A., and P. Diaz. 2016. “Experimental study on the effect of spiral flow on wax deposition thickness.” In Proc., SPE Russian Petroleum Technology Conf. and Exhibition. Moscow: OnePetro.
Westerweel, J. 1994. “Efficient detection of spurious vectors in particle image velocimetry data.” Exp. Fluids 16 (3): 236–247. https://doi.org/10.1007/BF00206543.
Xia, L.-S., Y.-G. Cheng, J.-D. Yang, and F. Cai. 2019. “Evolution of flow structures and pressure fluctuations in the S-shaped region of a pump-turbine.” J. Hydraul. Res. 57 (1): 107–121. https://doi.org/10.1080/00221686.2018.1459893.
Yakhot, V., S. A. Orszag, S. Thangam, T. B. Gatski, and C. G. Speziale. 1992. “Development of turbulence models for shear flows by a double expansion technique.” Phys. Fluids A 4 (7): 1510–1520. https://doi.org/10.1063/1.858424.
Zohir, A., A. A. Aziz, and M. Habib. 2011. “Heat transfer characteristics in a sudden expansion pipe equipped with swirl generators.” Int. J. Heat Fluid Flow 32 (1): 352–361. https://doi.org/10.1016/j.ijheatfluidflow.2010.06.009.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 8, 2022
Accepted: Aug 9, 2023
Published online: Sep 26, 2023
Published in print: Dec 1, 2023
Discussion open until: Feb 26, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.