Dimensionless Analysis of Non-Newtonian Power-Law Fluid Hammer
Publication: Journal of Hydraulic Engineering
Volume 149, Issue 9
Abstract
The current study presents a mathematical model to simulate a power-law fluid hammer problem in pipelines. The flow is considered two-dimensional, isothermal, weakly compressible, and laminar. The governing equations consisting of mass and momentum balances are solved by the method of characteristics. The model results are compared to other numerical model values and validated against measured data found in the literature. The comparisons show that the two-dimensional model agrees better with experimental data than the one-dimensional approach. Two dimensionless parameters (a dissipative parameter and the power-law index) are identified to govern the phenomenon, and a sensitivity analysis with respect to these parameters is conducted. It can be anticipated that the first pressure overshoot due to line packing and pressure wave dissipation increase with the dissipative parameter and with the power-law index.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors acknowledge the financial support of PETROBRAS S/A (TC 0050.0070318.11.9), FINEP, PRH-ANP/MCT (PRH-ANP/MCTI No. 10-C), and PFRH/PETROBRAS (6000.0067933.11.4 and 6000.0082166.13.4).
References
Anderson, J. D. 1990. Modern compressible flow: With historical perspective. New York: McGraw-Hill.
Bergant, A., A. Ross Simpson, and J. Vìtkovsk[ygrave]. 2001. “Developments in unsteady pipe flow friction modeling.” J. Hydraul. Res. 39 (3): 249–257. https://doi.org/10.1080/00221680109499828.
Bird, R. B., R. C. Armstrong, and O. Hassager. 1987. Dynamics of polymeric liquids Vol 1 fluid mechanics. New York: Wiley.
Brunelli, M. C. P. 2005. “Two-dimensional pipe model for laminar flow.” J. Fluids Eng. 127 (3): 431. https://doi.org/10.1115/1.1905645.
Brunone, B., U. M. Golia, and M. Greco. 1995. “Effects of two-dimensionality on pipe transients modeling.” J. Hydraul. Eng. 121 (12): 906–912. https://doi.org/10.1061/(ASCE)0733-9429(1995)121:12(906).
Brunone, B., B. W. Karney, M. Mecarelli, and M. Ferrante. 2000. “Velocity profiles and unsteady pipe friction in transient flow.” J. Water Resour. Plann. Manage. 126 (4): 236–244. https://doi.org/10.1061/(ASCE)0733-9496(2000)126:4(236).
Brunone, B., and L. Morelli. 1999. “Automatic control valve–induced transients in operative pipe system.” J. Hydraul. Eng. 125 (5): 534–542. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:5(534).
Carreau, P. J. 1972. “Rheological equations from molecular network theories.” J. Rheol. 16 (1): 99. https://doi.org/10.1122/1.549276.
Chaudhry, M. H. 2014. “Applied hydraulic transients.” In Hydraulics. New York: Springer.
Ghidaoui, M. S., M. Zhao, D. A. McInnis, and D. H. Axworthy. 2005. “A review of water hammer theory and practice.” Appl. Mech. Rev. 58 (1): 49. https://doi.org/10.1115/1.1828050.
Holmboe, E. L., and W. T. Rouleau. 1967. “The effect of viscous shear on transients in liquid lines.” J. Basic Eng. 89 (1): 174. https://doi.org/10.1115/1.3609549.
Joukowski, N. 1904. “Water hammer.” Proc. Am. Water Works Assoc. 24 (Mar): 341–424.
Larock, B. E., R. W. Jeppson, and G. Z. Watters. 1999. Hydraulics of pipeline systems. Boca Raton, FL: CRC Press.
Lin, K., H. Liu, M. Wei, A. Zhou, and F. Bu. 2018. “Dynamic performance of shear-thickening fluid damper under long-term cyclic loads.” Smart Mater. Struct. 28 (2): 025007. https://doi.org/10.1088/1361-665X/aaf079.
Liu, B., C. Du, L. Wang, Y. Fu, and L. Song. 2021. “The rheological properties of multifunctional shear thickening materials and their application in vehicle shock absorbers.” Smart Mater. Struct. 30 (8): 085028. https://doi.org/10.1088/1361-665X/ac0d10.
Metzner, A. B., and J. C. Reed. 1955. “Flow of non-newtonian fluids—Correlation of the laminar, transition, and turbulent-flow regions.” AIChE J. 1 (4): 434–440. https://doi.org/10.1002/aic.690010409.
Nathan, G. K., J. K. Tan, and K. C. Ng. 1988. “Two-dimensional analysis of pressure transients in pipelines.” Int. J. Numer. Methods Fluids 8 (3): 339–349. https://doi.org/10.1002/fld.1650080307.
Oliveira, G. M., A. T. Franco, and C. O. R. Negrão. 2015a. “Mathematical model for viscoplastic fluid hammer.” J. Fluids Eng. 138 (1): 11301. https://doi.org/10.1115/1.4031001.
Oliveira, G. M., A. T. Franco, C. O. R. Negrão, R. B. Vadinal, B. S. Lomba, T. U. Fonseca, and A. L. L. Martins. 2015b. “Pressure transmission in gelled drilling fluids.” In Proc., SPE/IADC Drilling Conf. and Exhibition, 1690–1699. London: SPE. https://doi.org/10.2118/173128-ms.
Oliveira, G. M., and C. O. R. Negrão. 2015. “The effect of compressibility on flow start-up of waxy crude oils.” J. Non-Newtonian Fluid Mech. 220 (Mar): 137–147. https://doi.org/10.1016/j.jnnfm.2014.12.010.
Pezzinga, G. 1999. “Quasi-2D model for unsteady flow in pipe networks.” J. Hydraul. Eng. 125 (7): 676–685. https://doi.org/10.1061/(ASCE)0733-9429(1999)125:7(676).
Richardson, E. G., and E. Tyler. 1929. “The transverse velocity gradient near the mouths of pipes in which an alternating or continuous flow of air is established.” Proc. Phys. Soc. 42 (1): 1–15. https://doi.org/10.1088/0959-5309/42/1/302.
Streeter, V. L., and C. Lai. 1962. “Water-hammer analysis including fluid friction.” J. Hydraul. Div. 88 (3): 79–112. https://doi.org/10.1061/JYCEAJ.0000736.
Streeter, V. L., and E. B. Wylie. 1974. “Waterhammer and surge control.” Annu. Rev. Fluid Mech. 6 (1): 57–73. https://doi.org/10.1146/annurev.fl.06.010174.000421.
Szymkiewicz, R., and M. Mitosek. 2004. “Analysis of unsteady pipe flow using the modified finite element method.” Commun. Numer. Methods Eng. 21 (4): 183–199. https://doi.org/10.1002/cnm.741.
Tazraei, P., and A. Riasi. 2015. “Quasi-two-dimensional numerical analysis of fast transient flows considering non-newtonian effects.” J. Fluids Eng. 138 (1): 11203. https://doi.org/10.1115/1.4031093.
Tazraei, P., A. Riasi, and B. Takabi. 2015. “The influence of the non-Newtonian properties of blood on blood-hammer through the posterior cerebral artery.” Math. Biosci. 264 (1): 119–127. https://doi.org/10.1016/j.mbs.2015.03.013.
Tian, T., and M. Nakano. 2017. “Design and testing of a rotational brake with shear thickening fluids.” Smart Mater. Struct. 26 (3): 035038. https://doi.org/10.1088/1361-665X/aa5a2c.
Vardy, A., and J. Brown. 2004. “Efficient approximation of unsteady friction weighting functions.” J. Hydraul. Eng. 130 (11): 1097–1107. https://doi.org/10.1061/(ASCE)0733-9429(2004)130:11(1097).
Versteeg, H. K., and W. Malalasekera. 2007. Introduction: Computational fluid dynamics. New York: Springer.
Wahba, E. M. 2006. “Runge–Kutta time-stepping schemes with TVD central differencing for the water hammer equations.” Int. J. Numer. Methods Fluids 52 (5): 571–590. https://doi.org/10.1002/fld.1188.
Wahba, E. M. 2008. “Modelling the attenuation of laminar fluid transients in piping systems.” Appl. Math. Modell. 32 (12): 2863–2871. https://doi.org/10.1016/j.apm.2007.10.004.
Wahba, E. M. 2013. “Non-Newtonian fluid hammer in elastic circular pipes: Shear-thinning and shear-thickening effects.” J. Non-Newtonian Fluid Mech. 198 (Aug): 24–30. https://doi.org/10.1016/j.jnnfm.2013.04.007.
Wood, D. J., and T. Y. Kao. 1968. Evaluation of quasi-steady approximation for viscous effects in unsteady liquid pipe flow, 8. Lexington, KY: Univ. of Kentucky.
Wylie, E. B., V. L. Streeter, and L. Suo. 1993. Fluid transients in systems. Englewood Cliffs, NJ: Prentice Hall.
Zhao, M., and M. S. Ghidaoui. 2003. “Efficient quasi-two-dimensional model for water hammer problems.” J. Hydraul. Eng. 129 (12): 1007–1013. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:12(1007).
Zielke, W. 1968. “Frequency-dependent friction in transient pipe flow.” J. Basic Eng. 90 (1): 109. https://doi.org/10.1115/1.3605049.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Mar 17, 2022
Accepted: Apr 22, 2023
Published online: Jul 4, 2023
Published in print: Sep 1, 2023
Discussion open until: Dec 4, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.