Safety Factor for Thoma Stable Area Considering the Governor-Turbine-Penstock System
Publication: Journal of Hydraulic Engineering
Volume 149, Issue 3
Abstract
The surge tank plays a crucial role in moderating oscillations in hydropower stations, and its critical stable cross-sectional area (CSCA) is key to its stable operation. Normally, the Thoma stable area is widely used to calculate the CSCA, and a safety factor is multiplied for a safety margin. However, the safety factor is empirical and lacks theoretical basis. In this study, we present an analytical formula to calculate the safety factor considering the effect of the governor-turbine-penstock system (GTPS). Mathematical models of the surge tank-headrace tunnel system (SHTS) and GTPS are established, and amplitude–frequency characteristics are analyzed. The formula for is derived using the oscillation superposition method, and its accuracy is verified. Additionally, the effect of the governor on is investigated. The results indicate that the formula provides sufficient accuracy for the design of surge tanks. The effect of the governor can reduce the value of such that a sub-Thoma stable area can be used.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by National Natural Science Foundation of China (Grant Nos. 51879087, 51839008, and 52179062).
References
Adam, N. J., G. De Cesare, C. Nicolet, P. Billeter, A. Angermayr, B. Valluy, and A. J. Schleiss. 2018. “Design of a throttled surge tank for refurbishment by increase of installed capacity at a high-head power plant.” J. Hydraul. Eng. 144 (2): 05017004. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001404.
Chaudhry, M. H. 2014. Applied hydraulic transients. Berlin: Springer.
Gabl, R., and M. Righetti. 2018. “Design criteria for a type of asymmetric orifice in a surge tank using CFD.” Eng. Appl. Comput. Fluid 12 (1): 397–410. https://doi.org/10.1080/19942060.2018.1443837.
Guo, W., and D. Zhu. 2018. “A review of the transient process and control for a hydropower station with a super long headrace tunnel.” Energies 11 (11): 2994. https://doi.org/10.3390/en11112994.
Jeager, C. 1960. “A review of surge-tank stability criteria.” J. Basic Eng. 82 (4): 765–775. https://doi.org/10.1115/1.3662744.
Li, D. 2009. Modern control theory. Harbin: Harbin institute of technology press.
Liu, Y., J. Zhang, Z. Liu, Q. Wang, and X. Yu. 2022. “Effect of the nonlinearity of head loss on stability and dynamic performance for hydropower plant with surge tank during small load disturbance.” J. Energy Storage 53 (Sep): 105182. https://doi.org/10.1016/j.est.2022.105182.
Ma, W., W. Yan, J. Yang, X. He, J. Yang, and W. Yang. 2022. “Experimental and numerical investigation on head losses of a complex throttled surge tank for refined hydropower plant simulation.” Renewable Energy 186 (Mar): 264–279. https://doi.org/10.1016/j.renene.2022.01.006.
Nogueira, H. I. S., M. Pfister, and A. J. Schleiss. 2016. “Approaches to reduce friction losses in headrace waterways of hydropower plants.” J. Hydraul. Eng. 142 (5): 02516001. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001123.
Pitorac, L., K. Vereide, L. Lia, and M. J. Cervantes. 2022. “Hydraulic scale modeling of mass oscillations in a pumped storage plant with multiple surge tanks.” J. Hydraul. Eng. 148 (9): 05022002. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001990.
Quaranta, E., and R. Revelli. 2020. “Performance optimization of overshot water wheels at high rotational speeds for hydropower applications.” J. Hydraul. Eng. 146 (9): 06020011. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001793.
Svee, R. 1972. “Surge chamber with enclosed compressed air cushion.” In Proc., 1st Int. Conf. on Pressure Surges, 15–24. Cranfield, England: BHRA Fluid Engineering.
Thoma, D. 1910. Zur Theoie des Wasserschlossers bei Selbsttaetig Geregelien Turbinemanlagen. [In German.] Oldenburg, Munchen: Applied Hydraulic Transients.
Wylie, E. B., V. L. Streeter, and L. S. Suo. 1993. Fluid transients in systems. Englewood Cliffs, NJ: Prentice-Hall.
Xie, Y. 2015. The radical solutions of algebraic equation and galois. [In Chinese.] Harbin: Harbin Institute of Technology Press.
Yang, J., X. Lai, and J. Chen. 1998. “The effect turbine characteristic on stable sectional area of surge tank.” [In Chinese.] J. Hydraul. Eng. 1998 (2): 8–12.
Yang, X., J. Lian, X. Yu, and W. He. 2021. “Critical stable cross-sectional area of surge tank in hydropower plant with multiple units sharing common hydraulic system.” Int. J. Electr. Power Syst. 131 (Oct): 107067. https://doi.org/10.1016/j.ijepes.2021.107067.
Yu, X., X. Yang, Z. Liu, and J. Zhang. 2020. “Mechanism and quantified criteria of stability characteristics of hydropower plants with surge tanks during regulation.” Int. J. Electr. Power Syst. 122 (Nov): 106160. https://doi.org/10.1016/j.ijepes.2020.106160.
Yu, X., J. Zhang, C. Fan, and S. Chen. 2016. “Stability analysis of governor-turbine-hydraulic system by state space method and graph theory.” Energy 114 (Nov): 613–622. https://doi.org/10.1016/j.energy.2016.07.164.
Yu, X., Q. Zhou, L. Zhang, and J. Zhang. 2019. “Hydraulic disturbance in multiturbine hydraulically coupled systems of hydropower plants caused by load variation.” J. Hydraul. Eng. 145 (1): 04018078. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001548.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 8, 2022
Accepted: Nov 9, 2022
Published online: Dec 27, 2022
Published in print: Mar 1, 2023
Discussion open until: May 27, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.