Practical Approach for Data-Efficient Metamodeling and Real-Time Modeling of Monopiles Using Physics-Informed Multifidelity Data Fusion
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 8
Abstract
This paper proposes a practical approach for data-efficient metamodeling and real-time modeling of laterally loaded monopiles using physics-informed multifidelity data fusion. The proposed approach fuses information from one-dimensional (1D) beam-column model analysis, three-dimensional (3D) finite element analysis, and field measurements (in order of increasing fidelity) for enhanced accuracy. It uses an interpretable scale factor–based data fusion architecture within a deep learning framework and incorporates physics-based constraints for robust predictions with limited data. The proposed approach is demonstrated for modeling monopile lateral load–displacement behavior using data from a real-world case study. Results show that the approach provides significantly more accurate predictions compared to a single-fidelity metamodel and a widely used multifidelity data fusion model. The model’s interpretability and data efficiency make it suitable for practical applications.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request. The PIMFNN code is available open-source at https://github.com/autogeolab/PIMFNN/.
Acknowledgments
The second author is supported by the Royal Academy of Engineering under the Research Fellowships scheme.
References
API (American Petroleum Institute). 2011. Recommended practice 2GEO geotechnical and foundation design considerations. Washington, DC: ACI.
Buckley, R., Y. M. Chen, B. Sheil, S. Suryasentana, D. Xu, J. Doherty, and M. Randolph. 2023. “Bayesian optimization for CPT-based prediction of impact pile drivability.” J. Geotech. Geoenviron. Eng. 149 (11): 04023100. https://doi.org/10.1061/JGGEFK.GTENG-11385.
Byrne, B. W., et al. 2020a. “Monotonic laterally loaded pile testing in a stiff glacial clay till at Cowden.” Géotechnique 70 (11): 970–985. https://doi.org/10.1680/jgeot.18.PISA.003.
Byrne, B. W., et al. 2020b. “PICASO: Cyclic lateral loading of offshore wind turbine monopiles.” In Proc., 4th Int. Symp. on Frontiers in Offshore Geotechnics (ISFOG 2021): Frontiers in Offshore Geotechnics IV. Hawthorne, NJ: Deep Foundations Institute.
Byrne, B. W., et al. 2020c. “PISA design model for monopiles for offshore wind turbines: Application to a stiff glacial clay till.” Géotechnique 70 (11): 1030–1047. https://doi.org/10.1680/jgeot.18.P.255.
Conde López, E. R., M. Á. Toledo Municio, and E. Salete Casino. 2021. “Optimization of numerical models through instrumentation data integration: Digital twin models for dams.” Comput. Math. Methods 3 (6): e1205. https://doi.org/10.1002/cmm4.1205.
Cuomo, S., V. S. Di Cola, F. Giampaolo, G. Rozza, M. Raissi, and F. Piccialli. 2022. “Scientific machine learning through physics–informed neural networks: Where we are and what’s next.” J. Sci. Comput. 92 (3): 88. https://doi.org/10.1007/s10915-022-01939-z.
DNV (Det Norske Veritas). 2014. Design of offshore wind turbine structures. OS-J101. Oslo, Norway: DNV.
Gal, Y., and Z. Ghahramani. 2016. “Dropout as a Bayesian approximation: Representing model uncertainty in deep learning.” In Proc., 33rd Int. Conf. on Machine Learning, 1050–1059. Cambridge, MA: Journal of Machine Learning Research.
Han, T., K. S. Ahmed, A. K. Gosain, A. B. Tepole, and T. Lee. 2022. “Multi-fidelity Gaussian process surrogate modeling of pediatric tissue expansion.” J. Biomech. Eng. 144 (12): 121005. https://doi.org/10.1115/1.4055276.
Jostad, H. P., B. M. Dahl, A. Page, N. Sivasithamparam, and H. Sturm. 2020. “Evaluation of soil models for improved design of offshore wind turbine foundations in dense sand.” Géotechnique 70 (8): 682–699. https://doi.org/10.1680/jgeot.19.TI.034.
Kang, F., S. Han, R. Salgado, and J. Li. 2015. “System probabilistic stability analysis of soil slopes using Gaussian process regression with Latin hypercube sampling.” Comput. Geotech. 63 (Jan): 13–25. https://doi.org/10.1016/j.compgeo.2014.08.010.
Kennedy, M. C., and A. O’Hagan. 2000. “Predicting the output from a complex computer code when fast approximations are available.” Biometrika 87 (1): 1–13. https://doi.org/10.1093/biomet/87.1.1.
Khuri, A. I., and S. Mukhopadhyay. 2010. “Response surface methodology.” Wiley Interdiscip. Rev. Comput. Stat. 2 (2): 128–149. https://doi.org/10.1002/wics.73.
Liu, D., and Y. Wang. 2019. “Multi-fidelity physics-constrained neural network and its application in materials modeling.” J. Mech. Des. 141 (12): 121403. https://doi.org/10.1115/1.4044400.
Liu, X., W. Zhao, and D. Wan. 2022. “Multi-fidelity Co-Kriging surrogate model for ship hull form optimization.” Ocean Eng. 243 (Jan): 110239. https://doi.org/10.1016/j.oceaneng.2021.110239.
Mentani, A., L. Govoni, F. Bourrier, and R. Zabatta. 2023. “Metamodelling of the load-displacement response of offshore piles in sand.” Comput. Geotech. 159 (Jul): 105490. https://doi.org/10.1016/j.compgeo.2023.105490.
Murdoch, W. J., C. Singh, K. Kumbier, R. Abbasi-Asl, and B. Yu. 2019. “Definitions, methods, and applications in interpretable machine learning.” Proc. Natl. Acad. Sci. 116 (44): 22071–22080. https://doi.org/10.1073/pnas.1900654116.
Oliver, M. A., and R. Webster. 2014. “A tutorial guide to geostatistics: Computing and modelling variograms and kriging.” Catena 113 (Feb): 56–69. https://doi.org/10.1016/j.catena.2013.09.006.
Paszke, A., et al. 2019. “Pytorch: An imperative style, high-performance deep learning library.” In Vol. 32 of Advances in neural information processing systems. La Jolla, CA: Neural Information Processing Systems Foundation.
Peherstorfer, B., K. Willcox, and M. Gunzburger. 2018. “Survey of multifidelity methods in uncertainty propagation, inference, and optimization.” SIAM Rev. 60 (3): 550–591. https://doi.org/10.1137/16M1082469.
Saves, P., R. Lafage, N. Bartoli, Y. Diouane, J. Bussemaker, T. Lefebvre, J. T. Hwang, J. Morlier, and J. R. Martins. 2023. “SMT 2.0: A surrogate modeling toolbox with a focus on hierarchical and mixed variables gaussian processes.” Preprint, submitted May 23, 2023. http://arxiv.org/abs/2305.13998.
Sheil, B. B., S. K. Suryasentana, M. A. Mooney, and H. Zhu. 2020a. “Machine learning to inform tunnelling operations: Recent advances and future trends.” Proc. Inst. Civ. Eng. Smart Infrastruct. Constr. 173 (4): 74–95. https://doi.org/10.1680/jsmic.20.00011.
Sheil, B. B., S. K. Suryasentana, M. A. Mooney, H. Zhu, B. A. McCabe, and K. G. O’Dwyer. 2020b. “Discussion: Machine learning to inform tunnelling operations: Recent advances and future trends.” Proc. Inst. Civ. Eng. Smart Infrastruct. Constr. 173 (1): 180–181. https://doi.org/10.1680/jsmic.2020.173.1.180.
Sheil, B. B., S. K. Suryasentana, J. O. Templeman, B. M. Phillips, W.-C. Cheng, and L. Zhang. 2022. “Prediction of pipe-jacking forces using a Bayesian updating approach.” J. Geotech. Geoenviron. Eng. 148 (1): 04021173. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002645.
Shen, Q., F. Vahdatikhaki, H. Voordijk, J. van der Gucht, and L. van der Meer. 2022. “Metamodel-based generative design of wind turbine foundations.” Autom. Constr. 138 (Jun): 104233. https://doi.org/10.1016/j.autcon.2022.104233.
Soubra, A. H., T. Al-Bittar, J. Thajeel, and A. Ahmed. 2019. “Probabilistic analysis of strip footings resting on spatially varying soils using kriging metamodeling and importance sampling.” Comput. Geotech. 114 (Oct): 103107. https://doi.org/10.1016/j.compgeo.2019.103107.
Stuyts, B., and S. Suryasentana. 2023. “Applications of data science in offshore geotechnical engineering: State of practice and future perspectives.” In Proc., SUT OSIG 9th Int. Conf. London: Society for Underwater Technology.
Suryasentana, S., and B. M. Lehane. 2014. “Verification of numerically derived CPT based py curves for piles in sand. In Proc., 3rd Int. Symp. on Cone Penetration Testing, 3–29. Boca Raton, FL: CRC Press.
Suryasentana, S. K., H. J. Burd, B. W. Byrne, and A. Shonberg. 2020. “A systematic framework for formulating convex failure envelopes in multiple loading dimensions.” Géotechnique 70 (4): 343–353. https://doi.org/10.1680/jgeot.18.P.251.
Suryasentana, S. K., H. J. Burd, B. W. Byrne, and A. Shonberg. 2021. “Automated procedure to derive convex failure envelope formulations for circular surface foundations under six degrees of freedom loading.” Comput. Geotech. 137 (Sep): 104174. https://doi.org/10.1016/j.compgeo.2021.104174.
Suryasentana, S. K., H. J. Burd, B. W. Byrne, and A. Shonberg. 2022. “A Winkler model for suction caisson foundations in homogeneous and non-homogeneous linear elastic soil.” Géotechnique 72 (5): 407–423. https://doi.org/10.1680/jgeot.19.P.172.
Suryasentana, S. K., H. J. Burd, B. W. Byrne, and A. Shonberg. 2023a. “Modulus weighting method for stiffness estimations of suction caissons in layered soils.” Géotech. Lett. 13 (2): 1–8. https://doi.org/10.1680/jgele.23.00007.
Suryasentana, S. K., H. J. Burd, B. W. Byrne, and A. Shonberg. 2023b. “Small-strain, non-linear elastic Winkler models for uniaxial loading of suction caisson foundations.” Géotech. Lett. 13 (4): 170–181. https://doi.org/10.1680/jgele.23.00043.
Suryasentana, S. K., B. W. Byrne, H. J. Burd, and A. Shonberg. 2017. “Simplified model for the stiffness of suction caisson foundations under 6 DOF loading.” In Proc., SUT OSIG 8th Int. Conf. London: Society for Underwater Technology.
Suryasentana, S. K., B. W. Byrne, H. J. Burd, and A. Shonberg. 2018. “An elastoplastic 1D Winkler model for suction caisson foundations under combined loading.” In Proc., 9th European Conf. on Numerical Methods in Geotechnical Engineering (NUMGE 2018): Numerical Methods in Geotechnical Engineering IX, Volume 2, 973. Porto, Portugal: CRC Press.
Suryasentana, S. K., and P. W. Mayne. 2022. “Simplified method for the lateral, rotational, and torsional static stiffness of circular footings on a nonhomogeneous elastic half-space based on a work-equivalent framework.” J. Geotech. Geoenviron. Eng. 148 (2): 04021182. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002731.
Wang, Q., and P. Owens. 2022. “Reliability-based design optimisation of geotechnical systems using a decoupled approach based on adaptive metamodels.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 16 (3): 470–488. https://doi.org/10.1080/17499518.2021.1884884.
Zdravković, L., et al. 2020a. “Finite-element modelling of laterally loaded piles in a stiff glacial clay till at Cowden.” Géotechnique 70 (11): 999–1013. https://doi.org/10.1680/jgeot.18.PISA.005.
Zdravković, L., et al. 2020b. “Ground characterisation for PISA pile testing and analysis.” Géotechnique 70 (11): 945–960. https://doi.org/10.1680/jgeot.18.PISA.001.
Zhang, P., Y. F. Jin, and Z. Y. Yin. 2021. “Machine learning–based uncertainty modelling of mechanical properties of soft clays relating to time-dependent behavior and its application.” Int. J. Numer. Anal. Methods Geomech. 45 (11): 1588–1602. https://doi.org/10.1002/nag.3215.
Zhang, P., Z. Y. Yin, and B. Sheil. 2023. “Interpretable data-driven constitutive modelling of soils with sparse data.” Comput. Geotech. 160 (Aug): 105511. https://doi.org/10.1016/j.compgeo.2023.105511.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 18, 2023
Accepted: Mar 5, 2024
Published online: May 21, 2024
Published in print: Aug 1, 2024
Discussion open until: Oct 21, 2024
ASCE Technical Topics:
- Analysis (by type)
- Continuum mechanics
- Design (by type)
- Dynamic loads
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering mechanics
- Finite element method
- Foundations
- Geotechnical engineering
- Lateral loads
- Load factors
- Methodology (by type)
- Model accuracy
- Models (by type)
- Numerical methods
- Pile foundations
- Piles
- Solid mechanics
- Structural design
- Structural dynamics
- Three-dimensional analysis
- Three-dimensional models
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.