Effect of Anisotropic Consolidation on Cyclic Liquefaction Resistance of Granular Materials via 3D-DEM Modeling
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 5
Abstract
The influence of anisotropic consolidation on the cyclic liquefaction resistance of granular materials is explored using 3D discrete element method simulations. In this study, the term anisotropic consolidation was defined as the ratio of initial horizontal and vertical normal stresses, and the hypothesis was that the conflicting results from previous laboratory experiments could be attributed to differences in inherent fabric. To test this hypothesis, three unique sample preparation protocols were employed to construct polydisperse spherical particle samples with varying inherent fabrics, as quantified by coordination number and contact-normal fabric anisotropy, under consistent initial mean stress and density conditions. The results were intriguing, as they revealed that anisotropic consolidation had a consistent impact on the cyclic liquefaction resistance of loose and medium-dense samples, regardless of preparation protocol. However, this relationship was not as straightforward in dense samples. In addition, the study assessed the correlations between various parameters, including initial shear wave velocity, state parameters associated with both void ratio and coordination number, fabric anisotropy, and their impact on the cyclic liquefaction resistance of the samples. The findings enhance the understanding of the intricate interplay between anisotropic consolidation and the resistance of granular materials to cyclic liquefaction, providing valuable insights that can inform the development of accurate models for predicting and mitigating cyclic liquefaction in various applications.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Financial support for this study was provided by the Natural Sciences and Engineering Research Council of Canada (NSERC). The authors thank Professor Ellen Rathje for facilitating access to HPC resources at the Texas Advanced Computing Center.
References
Agnolin, I., and J.-N. Roux. 2007. “Internal states of model isotropic granular packings. I. Assembling process, geometry, and contact networks.” Phys. Rev. E 76 (6): 061302. https://doi.org/10.1103/PhysRevE.76.061302.
Ahmadi, M. M., and N. A. Paydar. 2014. “Requirements for soil-specific correlation between shear wave velocity and liquefaction resistance of sands.” Soil Dyn. Earthquake Eng. 57 (Mar): 152–163. https://doi.org/10.1016/j.soildyn.2013.11.001.
Ai, J., J.-F. Chen, J. M. Rotter, and J. Y. Ooi. 2011. “Assessment of rolling resistance models in discrete element simulations.” Powder Technol. 206 (3): 269–282. https://doi.org/10.1016/j.powtec.2010.09.030.
Amini, P. F., D. Huang, G. Wang, and F. Jin. 2021. “Effects of strain history and induced anisotropy on reliquefaction resistance of Toyoura sand.” J. Geotech. Geoenviron. Eng. 147 (9): 04021094. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002588.
Banerjee, S. K., M. Yang, and M. Taiebat. 2023. “Effect of coefficient of uniformity on cyclic liquefaction resistance of granular materials.” Comput. Geotech. 155 (Mar): 105232. https://doi.org/10.1016/j.compgeo.2022.105232.
Banerjee, S. K., M. Yang, and M. Taiebat. 2024. “Effect of particle shape on cyclic liquefaction resistance of granular materials.” Acta Geotech. 32 (Jan): 1–16.https://doi.org/10.1016/j.compgeo.2022.105232.
Baxter, C. D. P., A. S. Bradshaw, R. A. Green, and J.-H. Wang. 2008. “Correlation between cyclic resistance and shear-wave velocity for providence silts.” J. Geotech. Geoenviron. Eng. 134 (1): 37–46. https://doi.org/10.1061/(ASCE)1090-0241(2008)134:1(37).
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Boulanger, R. W., and R. B. Seed. 1995. “Liquefaction of sand under bidirectional monotonic and cyclic loading.” J. Geotech. Eng. 121 (12): 870–878. https://doi.org/10.1061/(ASCE)0733-9410(1995)121:12(870).
Chen, Y., H. Ke, and R.-P. Chen. 2005. “Correlation of shear wave velocity with liquefaction resistance based on laboratory tests.” Soil Dyn. Earthquake Eng. 25 (6): 461–469. https://doi.org/10.1016/j.soildyn.2005.03.003.
Georgiannou, V. N., and M. Konstadinou. 2014. “Effects of density on cyclic behaviour of anisotropically consolidated Ottawa sand under undrained torsional loading.” Géotechnique 64 (4): 287–302. https://doi.org/10.1680/geot.13.P.090.
Ghoraiby, M. E., H. Park, and M. T. Manzari. 2020. “Physical and mechanical properties of Ottawa F65 sand.” In Model tests and numerical simulations of liquefaction and lateral spreading, 45–67. Cham, Switzerland: Springer.
Gu, X., X. Liang, and J. Hu. 2023. “Quantifying fabric anisotropy of granular materials using wave velocity anisotropy: A numerical investigation.” Géotechnique 1–13. https://doi.org/10.1680/jgeot.22.00314.
Gu, X., J. Zhang, and X. Huang. 2020. “DEM analysis of monotonic and cyclic behaviors of sand based on critical state soil mechanics framework.” Comput. Geotech. 128 (Mar): 103787. https://doi.org/10.1016/j.compgeo.2020.103787.
Guo, N., and J. Zhao. 2013. “The signature of shear-induced anisotropy in granular media.” Comput. Geotech. 47 (Jan): 1–15. https://doi.org/10.1016/j.compgeo.2012.07.002.
Hosono, Y., and M. Yoshimine. 2008. “Effects of anisotropic consolidation and initial shear load on liquefaction resistance of sand in simple shear condition.” In Vol. 4 of Proc., Geotechnical Engineering for Disaster Mitigation and Rehabilitation, 352–358. Berlin: Springer.
Huang, X., C.-Y. Kwok, K. J. Hanley, and Z. Zhang. 2018. “DEM analysis of the onset of flow deformation of sands: Linking monotonic and cyclic undrained behaviours.” Acta Geotech. 13 (5): 1061–1074. https://doi.org/10.1007/s11440-018-0664-3.
Ishihara, K., S. Iwamoto, S. Yasuda, and H. Takatsu. 1977. “Liquefaction of anisotropically consolidated sand.” In Vol. 2 of Proc., 9th Int. Conf. on Soil Mechanics and Foundation Engineering, JSSMFE, 261–264. London: International Society for Soil Mechanics and Geotechnical Engineering.
Ishihara, K., and H. Takatsu. 1979. “Effects of overconsolidation and k0 conditions on the liquefaction characteristics of sands.” Soils Found. 19 (4): 59–68. https://doi.org/10.3208/sandf1972.19.4_59.
Jefferies, M., and K. Been. 2015. Soil liquefaction: A critical state approach. Boca Raton, FL: CRC Press.
Kanatani, K.-I. 1984. “Distribution of directional data and fabric tensors.” Int. J. Eng. Sci. 22 (2): 149–164. https://doi.org/10.1016/0020-7225(84)90090-9.
Kloss, C., C. Goniva, A. Hager, S. Amberger, and S. Pirker. 2012. “Models, algorithms and validation for opensource DEM and CFD–DEM.” Prog. Comput. Fluid Dyn. 12 (2–3): 140–152. https://doi.org/10.1504/PCFD.2012.047457.
Kuhn, M. R. 2017. Granular geomechanics. Amsterdam, Netherlands: Elsevier.
Kuhn, M. R., H. E. Renken, A. D. Mixsell, and S. L. Kramer. 2014. “Investigation of cyclic liquefaction with discrete element simulations.” J. Geotech. Geoenviron. Eng. 140 (12): 04014075. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001181.
Li, Y., M. Otsubo, and R. Kuwano. 2023. “Evaluation of soil fabric using elastic waves during load-unload.” J. Rock Mech. Geotech. Eng. 15 (10): 2687–2700. https://doi.org/10.1016/j.jrmge.2022.12.004.
MiDi, G. D. R. 2004. “On dense granular flows.” Eur. Phys. J. E 14 (4): 341–365. https://doi.org/10.1140/epje/i2003-10153-0.
Mital, U., R. Kawamoto, and J. E. Andrade. 2020. “Effect of fabric on shear wave velocity in granular soils.” Acta Geotech. 15 (5): 1189–1203. https://doi.org/10.1007/s11440-019-00766-1.
Mutabaruka, P., M. Taiebat, R. J.-M. Pellenq, and F. Radjai. 2019. “Effects of size polydispersity on random close-packed configurations of spherical particles.” Phys. Rev. E 100 (4): 042906. https://doi.org/10.1103/PhysRevE.100.042906.
Oda, M. 1982. “Fabric tensor for discontinuous geological materials.” Soils Found. 22 (4): 96–108. https://doi.org/10.3208/sandf1972.22.4_96.
O’Sullivan, C. 2011. Particulate discrete element modelling: A geomechanics perspective. Boca Raton, FL: CRC Press.
Otsubo, M., S. Chitravel, R. Kuwano, K. J. Hanley, H. Kyokawa, and J. Koseki. 2022. “Linking inherent anisotropy with liquefaction phenomena of granular materials by means of DEM analysis.” Soils Found. 62 (5): 101202. https://doi.org/10.1016/j.sandf.2022.101202.
Porcino, D. D., T. Triantafyllidis, T. Wichtmann, and G. Tomasello. 2021. “Application of critical state approach to liquefaction resistance of sand–silt mixtures under cyclic simple shear loading.” J. Geotech. Geoenviron. Eng. 147 (3): 04020177. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002470.
Radja, F., and F. Dubois. 2011. Discrete-element modeling of granular materials. New York: Wiley.
Rahman, M. M., H. B. K. Nguyen, A. B. Fourie, and M. R. Kuhn. 2021. “Critical state soil mechanics for cyclic liquefaction and postliquefaction behavior: DEM study.” J. Geotech. Geoenviron. Eng. 147 (2): 04020166. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002453.
Sitharam, T. G. 2003. “Discrete element modelling of cyclic behaviour of granular materials.” Geotech. Geol. Eng. 21 (4): 297–329. https://doi.org/10.1023/B:GEGE.0000006036.00597.0b.
Sufian, A., A. R. Russell, and A. J. Whittle. 2017. “Anisotropy of contact networks in granular media and its influence on mobilised internal friction.” Géotechnique 67 (12): 1067–1080. https://doi.org/10.1680/jgeot.16.P.170.
Tatsuoka, F., M. Muramatsu, and T. Sasaki. 1982. “Cyclic undrained stress-strain behavior of dense sands by torsional simple shear test.” Soils Found. 22 (2): 55–70. https://doi.org/10.3208/sandf1972.22.2_55.
Thornton, C. 2000. “Numerical simulations of deviatoric shear deformation of granular media.” Géotechnique 50 (1): 43–53. https://doi.org/10.1680/geot.2000.50.1.43.
Tokimatsu, K., and A. Uchida. 1990. “Correlation between liquefaction resistance and shear wave velocity.” Soils Found. 30 (2): 33–42. https://doi.org/10.3208/sandf1972.30.2_33.
Tokimatsu, K., T. Yamazaki, and Y. Yoshimi. 1986. “Soil liquefaction evaluations by elastic shear moduli.” Soils Found. 26 (1): 25–35. https://doi.org/10.3208/sandf1972.26.25.
Vargas, R. R., K. Ueda, and K. Uemura. 2020. “Influence of the relative density and K0 effects in the cyclic response of Ottawa F-65 sand-cyclic Torsional Hollow-Cylinder shear tests for LEAP-ASIA-2019” Soil Dyn. Earthquake Eng. 133 (Jun): 106111. https://doi.org/10.1016/j.soildyn.2020.106111.
Wang, G., and J. Wei. 2016. “Microstructure evolution of granular soils in cyclic mobility and post-liquefaction process.” Granular Matter 18 (3): 51. https://doi.org/10.1007/s10035-016-0621-5.
Wang, J.-H., K. Moran, and C. D. P. Baxter. 2006. “Correlation between cyclic resistance ratios of intact and reconstituted offshore saturated sands and silts with the same shear wave velocity.” J. Geotech. Geoenviron. Eng. 132 (12): 1574–1580. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:12(1574).
Wei, J., D. Huang, and G. Wang. 2018. “Microscale descriptors for particle-void distribution and jamming transition in pre- and post-liquefaction of granular soils.” J. Eng. Mech. 144 (8): 04018067. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001482.
Wei, J., and G. Wang. 2017. “Discrete-element method analysis of initial fabric effects on pre-and post-liquefaction behavior of sands.” Géotech. Lett. 7 (2): 161–166. https://doi.org/10.1680/jgele.16.00147.
Xu, M., Z. Zhang, and X. Huang. 2021. “Identification of jamming transition: A critical appraisal.” Granular Matter 23 (1): 1–17. https://doi.org/10.1007/s10035-020-01066-2.
Xu, X., D. Ling, Y. Cheng, and Y. Chen. 2015. “Correlation between liquefaction resistance and shear wave velocity of granular soils: A micromechanical perspective.” Géotechnique 65 (5): 337–348. https://doi.org/10.1680/geot.SIP.15.P.022.
Yamada, S., T. Takamori, and K. Sato. 2010. “Effects on reliquefaction resistance produced by changes in anisotropy during liquefaction.” Soils Found. 50 (1): 9–25. https://doi.org/10.3208/sandf.50.9.
Yang, J., and H. Y. Sze. 2011. “Cyclic behaviour and resistance of saturated sand under non-symmetrical loading conditions.” Géotechnique 61 (1): 59–73. https://doi.org/10.1680/geot.9.P.019.
Yang, M., M. Taiebat, P. Mutabaruka, and F. Radjaï. 2021. “Evolution of granular materials under isochoric cyclic simple shearing.” Phys. Rev. E 103 (Mar): 032904. https://doi.org/10.1103/PhysRevE.103.032904.
Yang, M., M. Taiebat, and F. Radjaï. 2022a. “Liquefaction of granular materials in constant-volume cyclic shearing: Transition between solid-like and fluid-like states.” Comput. Geotech. 148 (Aug): 104800. https://doi.org/10.1016/j.compgeo.2022.104800.
Yang, S., D. Huang, G. Wang, and F. Jin. 2022b. “Probing fabric evolution and reliquefaction resistance of sands using discrete-element modeling.” J. Eng. Mech. 148 (6): 04022023. https://doi.org/10.1061/(ASCE)EM.1943-7889.0002104.
Zhang, L., and T. M. Evans. 2020. “Investigation of initial static shear stress effects on liquefaction resistance using discrete element method simulations.” Int. J. Geomech. 20 (7): 04020087. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001720.
Zhou, Y.-G., and Y.-M. Chen. 2007. “Laboratory investigation on assessing liquefaction resistance of sandy soils by shear wave velocity.” J. Geotech. Geoenviron. Eng. 133 (8): 959–972. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:8(959).
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 150 • Issue 5 • May 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 27, 2023
Accepted: Dec 4, 2023
Published online: Feb 28, 2024
Published in print: May 1, 2024
Discussion open until: Jul 28, 2024
ASCE Technical Topics:
- Anisotropy
- Building materials
- Continuum mechanics
- Deformation (mechanics)
- Design (by type)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Fabrics
- Geomechanics
- Geotechnical engineering
- Granular materials
- Laboratory tests
- Load and resistance factor design
- Load factors
- Materials engineering
- Models (by type)
- Soil liquefaction
- Soil mechanics
- Soil properties
- Solid mechanics
- Static loads
- Statics (mechanics)
- Structural design
- Structural mechanics
- Tests (by type)
- Three-dimensional models
- Vertical loads
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.