The Equivalent Sand Particle Diameter Approach to Rationally Estimate the Erosion Behavior of Fine-Grained Riverbed Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 3
Abstract
The evaluation of erosion is often conducted by dedicated computer software, such as Hydrologic Engineering Center’s River Analysis System (HEC-RAS), which considers several input parameters such as the flow conditions, river geometry, and soil properties. It considers the soil condition primarily based on the mean particle size (). Research showed that grain size mainly controls the erosion characteristics of coarse particles, while additional factors such as the particle shape, size, and interparticle microelectrical forces control the erosion characteristics of fine particles, resulting in higher erosion resistance as the particle size becomes smaller. The borderline between these different behaviors is approximately at the mean particle size of 0.2 mm. Therefore, it needs a careful approach in evaluating the erosion depth of fine riverbed materials based on HEC-RAS and similar software. This study conducted erosion tests on four different riverbed soils in Nebraska using the Mini-JET. Then, it correlated the mean grain size to the critical shear stress and developed the logic of the “equivalent sand particle diameter method for fine particles” to rationally convert the particle diameter of fine particles to that of coarse ones with the same critical shear stress. HEC-RAS was then used with the equivalent sand particle diameter concept. It found that this method predicted the erosion depth for fine soils rationally well, opening the possibility of easy assessment for the erosion of fine-grained riverbed soils.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Authors would like to acknowledge the Nebraska Department of Transportation (NDOT) (26-1121-4051 and 26-1121-4052) for the financial support.
References
Abualshar, B. 2022. “Evaluation of an equivalent mean grain size diameter to rationally predict the erodibility of fine riverbed soils in Nebraska.” MS thesis, Dept. of Civil and Environmental Engineering, Univ. of Nebraska-Lincoln, Lincoln.
Al-Madhhachi, A. S. T., G. J. Hanson, G. A. Fox, A. K. Tyagi, and R. Bulut. 2013. “Measuring soil erodibility using a laboratory ‘mini’ JET.” Trans. ASABE 56 (3): 901–910. https://doi.org/10.13031/TRANS.56.9742.
Bolhasan, A., R. L. Wood, B. Abualshar, C. E. Wittich, C. R. Song, J. Guo, and Y. Liao. 2022. Data-driven prioritization and empirical predictions for bridge data-driven prioritization and empirical predictions for bridge scour in Nebraska Scour in Nebraska. Lincoln, NE: Nebraska DOT.
Briaud, J. L., A. V. Govindasamy, and I. Shafii. 2017. “Erosion charts for selected geomaterials.” J. Geotech. Geoenviron. Eng. 143 (10): 04017072. https://doi.org/10.1061/(asce)gt.1943-5606.0001771.
Briaud, J. L., and B. Hunt. 2006. “Bridge scour and the structural engineer.” Structure (Dec): 58–61.
Briaud, J. L., F. C. K. Ting, H. C. Chen, Y. Cao, S. W. Han, and K. W. Kwak. 2001. “Erosion function apparatus for scour rate predictions.” J. Geotech. Geoenviron. Eng. 127 (2): 105–113. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:2(105.
Briaud, J.-L., H.-C. Chen, and J. P. Wang. 2004. Contraction scour in cohesive soils. Washington, DC: National Cooperativa Highway Research Program.
Dunn, I. S. 1959. “Tractive resistance of cohesive channels.” J. Soil Mech. Found. Div. 85 (3): 1–24. https://doi.org/10.1061/JSFEAQ.0000195.
Hanson, G. J., and K. R. Cook. 1997. “Development of excess shear stress parameters for circular jet testing.” In Proc., ASAE Paper, 972227. St. Joseph, MI: American Society of Association Executives.
Hanson, G. J., and K. R. Cook. 2004. “Apparatus, test procedures, and analytical methods to measure soil erodibility in situ.” Appl. Eng. Agric. 20 (4): 455–462. https://doi.org/10.13031/2013.16492.
Julian, J. P., and R. Torres. 2006. “Hydraulic erosion of cohesive riverbanks.” Geomorphology 76 (1–2): 193–206. https://doi.org/10.1016/j.geomorph.2005.11.003.
Kameshwar, S., and J. E. Padgett. 2018. “Parameterized fragility assessment of bridges subjected to pier scour and vehicular loads.” J. Bridge Eng. 23 (7): 04018044. https://doi.org/10.1061/(asce)be.1943-5592.0001240.
Nebraska Legislature Transportation and Telecommunications Committee. 2014. The alarming condition of Nebraska’s rural bridges. Washington, DC: Nebraska Legislature.
Partheniades, E. 1965. “Erosion and deposition of cohesive soils.” J. Hydraul. Div. 91 (1): 105–139. https://doi.org/10.1061/JYCEAJ.0001165.
Simon, A., R. E. Thomas, and L. Klimetz. 2010. “Comparison and experiences with field techniques to measure critical shear stress and erodibility of cohesive deposits.” In Proc., 2nd Joint Federal Interagency Conf. Reston, VA: USGS.
Wahl, T. L. 2016. “The submerged jet erosion test: Past-present-future.” In Proc., USSD Int. Symp. on the Mechanics of Internal Erosion for Dams and Levees. Westminster, CO: US Society on Dams.
Zhu, Y., J. Lu, H. Liao, J. Wang, B. Fan, and S. Yao. 2008. “Research on cohesive sediment erosion by flow: An overview.” Sci. China Ser. E: Technol. Sci. 51 (11): 2001–2012. https://doi.org/10.1007/s11431-008-0232-4.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: May 2, 2023
Accepted: Oct 17, 2023
Published online: Dec 30, 2023
Published in print: Mar 1, 2024
Discussion open until: May 30, 2024
ASCE Technical Topics:
- Earth materials
- Engineering fundamentals
- Erosion
- Fine-grained soils
- Geology
- Geomaterials
- Geomechanics
- Geotechnical engineering
- Hydraulic models
- Models (by type)
- Particle size distribution
- Shear stress
- Soft soils
- Soil analysis
- Soil mechanics
- Soil properties
- Soils (by type)
- Stress (by type)
- Structural analysis
- Structural engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.