Consolidation of Saturated Kaolin Subjected to Intermittent Thermal Loading with Temperature Gradient
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 8
Abstract
This paper explores the influence of two thermal loading protocols on the evolutions of stress state and soil consolidation characteristics during subsequent mechanical loading. We employed a specially designed thermal consolidometer to conduct a series of drained heating tests with temperature gradient across a saturated kaolin specimen at different levels of vertical effective stress. The thermal consolidometer accommodated for (1) continuous measurements of excess pore water pressure and temperature at different locations within a specimen; and (2) establishment of a steady nonuniform soil temperature distribution, a condition that often exists in the field. Staged and cyclic thermal loading revealed the influences of vertical effective stress on total and nonrecoverable thermal strain. Continuous measurements of pore pressure and soil volume change traced the evolution of average vertical effective stress with void ratio. While the negative pore pressure measurements at the end of thermal consolidation of normally consolidated clay suggested a pseudo-overconsolidated behavior upon heating at low values of vertical effectives stress, such a tendency diminished with an increase in stress level. A gradual shift in normal consolidation line at ambient temperature suggested continuous hardening of a normally consolidated specimen when subjected to repeated thermal loading cycles in the past.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge financial support from the Science and Engineering Research Board, Government of India, under Grant CRG/2022/000736.
References
Abdullah, W. S., M. S. Al-Zou’bi, and K. A. Alshibli. 1997. “On the physicochemical aspects of compacted clay compressibility.” Can. Geotech. J. 34 (4): 551–559. https://doi.org/10.1139/t97-027.
Abuel-Naga, H., D. Bergado, S. Soralump, and P. Rujivipat. 2005. “Thermal consolidation of soft Bangkok clay.” Lowland Technol. Int. 7 (Jun): 13–21.
Abuel-Naga, H. M., D. T. Bergado, A. Bouazza, and G. Ramana. 2007. “Volume change behaviour of saturated clays under drained heating conditions: Experimental results and constitutive modeling.” Can. Geotech. J. 44 (8): 942–956. https://doi.org/10.1139/t07-031.
Abuel-Naga, H. M., D. T. Bergado, G. V. Ramana, L. Grino, P. Rujivipat, and Y. Thet. 2006. “Experimental evaluation of engineering behavior of soft Bangkok clay under elevated temperature.” J. Geotech. Geoenviron. Eng. 132 (7): 902–910. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:7(902).
ASTM. 2020. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. ASTM D2435. West Conshohocken, PA: ASTM.
Baldi, G. 1991. Developments in modelling of thermo-hydro-geomechanical behaviour of Boom clay and clay-based buffer materials: Commission of the European communities. Luxembourg: Commission of the European Communities.
Baldi, G., T. Hueckel, and R. Pellegrini. 1988. “Thermal volume changes of the mineral–water system in low-porosity clay soils.” Can. Geotech. J. 25 (4): 807–825. https://doi.org/10.1139/t88-089.
BIS (Bureau of Indian Standards). 1987. Methods of test for soils, Part XV: Determination of consolidation properties. IS 2720-15. New Delhi, India: BIS.
Bourne-Webb, P. J., B. Amatya, K. Soga, T. Amis, C. Davidson, and P. Payne. 2009. “Energy pile test at Lambeth College, London: Geotechnical and thermodynamic aspects of pile response to heat cycles.” Géotechnique 59 (3): 237–248. https://doi.org/10.1680/geot.2009.59.3.237.
British Standards Institution. 1990. Methods of test for soils for civil engineering purposes: Compressibility, permeability and durability tests. BS 1377-5:1990. London: British Standards Institution.
Burghignoli, A., A. Desideri, and S. Miliziano. 1992. “Deformability of clays under non isothermal conditions.” Riv. Ital. Geotecnica 26 (4): 227–236.
Burghignoli, A., A. Desideri, and S. Miliziano. 2000. “A laboratory study on the thermomechanical behaviour of clayey soils.” Can. Geotech. J. 37 (4): 764–780. https://doi.org/10.1139/t00-010.
Campanella, R. G., and J. K. Mitchell. 1968. “Influence of temperature variations on soil behavior.” J. Soil Mech. Found. Div. 94 (3): 709–734. https://doi.org/10.1061/JSFEAQ.0001136.
Cekerevac, C., and L. Laloui. 2004. “Experimental study of thermal effects on the mechanical behaviour of a clay.” Int. J. Numer. Anal. Methods Geomech. 28 (3): 209–228. https://doi.org/10.1002/nag.332.
Cekerevac, C., L. Laloui, and L. Vulliet. 2005. “A novel triaxial apparatus for thermo-mechanical testing of soils.” Geotech. Test. J. 28 (2): 161–170. https://doi.org/10.1520/GTJ12311.
Delage, P., N. Sultan, and Y. J. Cui. 2000. “On the thermal consolidation of Boom clay.” Can. Geotech. J. 37 (2): 343–354. https://doi.org/10.1139/t99-105.
Demars, K., and R. Charles. 1982. “Soil volume changes induced by temperature cycling.” Can. Geotech. J. 19 (2): 188–194. https://doi.org/10.1139/t82-021.
Di Donna, A., and L. Laloui. 2013. “Soil response under thermomechanical conditions imposed by energy geostructures.” In Energy geostructures, 3–21. Hoboken, NJ: Wiley. https://doi.org/10.1002/9781118761809.ch1.
Di Donna, A., and L. Laloui. 2015. “Response of soil subjected to thermal cyclic loading: Experimental and constitutive study.” Eng. Geol. 190 (Mar): 65–76. https://doi.org/10.1016/j.enggeo.2015.03.003.
Dudescu, C., A. Botean, and M. Hardau. 2013. “Thermal expansion coefficient determination of polymeric materials using digital image correlation.” Materiale plastice 50 (1): 55–59.
Favero, V., A. Ferrari, and L. Laloui. 2016. “Thermo-mechanical volume change behaviour of Opalinus clay.” Int. J. Rock Mech. Min. Sci. 90 (Dec): 15–25. https://doi.org/10.1016/j.ijrmms.2016.09.013.
Finn, F. 1952. “The effect of temperature on the consolidation characteristics of remolded clay.” In Proc., Symp. on Consolidation Testing of Soils. West Conshohocken, PA: ASTM.
Hanrahan, E., and L. Barden. 1968. “Primary and secondary consolidation of clay and peat.” Géotechnique 18 (3): 387–388. https://doi.org/10.1680/geot.1968.18.3.387.
Hueckel, T., and G. Baldi. 1990. “Thermoplasticity of saturated clays: Experimental constitutive study.” Int. J. Geotech. Eng. 116 (12): 1778–1796. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:12(1778).
Kolay, P., and G. Bhattacharya. 2008. “Remediation of the side friction in conventional oedometer tests by using large diameter consolidometer ring.” Int. J. Geotech. Eng. 2 (2): 161–167. https://doi.org/10.3328/IJGE.2008.02.02.161-167.
Kongkitkul, W., K. Kongwisawamitr, V. Suwanwattana, V. Thaweeprasart, and R. Sukkarak. 2014. “Comparisons of one-dimensional consolidation characteristics of clays by using two different specimen sizes.” In Geo-Shanghai 2014: Soil behavior and geomechanics, edited by X. Zhang, J. Chu, and R. Bulut, 333–342. Reston, VA: ASCE.
Kuntiwattanakul, P., I. Towhata, K. Ohishi, and I. Seko. 1995. “Temperature effects on undrained shear characteristics of clay.” Soils Found. 35 (1): 147–162. https://doi.org/10.3208/sandf1972.35.147.
Laloui, L. 2001. “Thermo-mechanical behaviour of soils.” Rev. Fr. Génie Civ. 5 (6): 809–843. https://doi.org/10.1080/12795119.2001.9692328.
Laloui, L., M. Nuth, and L. Vulliet. 2006. “Experimental and numerical investigations of the behaviour of a heat exchanger pile.” Int. J. Numer. Anal. Methods Geomech. 30 (8): 763–781. https://doi.org/10.1002/nag.499.
Lovisa, J., and N. Sivakugan. 2015. “Tall oedometer testing: Method to account for wall friction.” Int. J. Geomech. 15 (2): 04014045. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000359.
Mimouni, T., and L. Laloui. 2015. “Behaviour of a group of energy piles.” Can. Geotech. J. 52 (12): 1913–1929. https://doi.org/10.1139/cgj-2014-0403.
Morteza Zeinali, S., and S. L. Abdelaziz. 2021. “Thermal consolidation theory.” J. Geotech. Geoenviron. Eng. 147 (1): 04020147. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002423.
Murphy, K. D., J. S. McCartney, and K. S. Henry. 2015. “Evaluation of thermo-mechanical and thermal behavior of full-scale energy foundations.” Acta Geotech. 10 (2): 179–195. https://doi.org/10.1007/s11440-013-0298-4.
Ng, C. W. W., D. B. Akinniyi, and C. Zhou. 2020. “Volume change behaviour of a saturated lateritic clay under thermal cycles.” Bull. Eng. Geol. Environ. 80 (Jan): 653–661. https://doi.org/10.1007/s10064-020-01899-4.
Ogawa, A., A. Takai, T. Shimizu, and T. Katsumi. 2020. “Effects of temperature on consolidation and consistency of clayey soils.” In Vol. 205 of Proc., E3S Web of Conf., 09010. Les Ulis, France: EDP Science. https://doi.org/10.1051/e3sconf/202020509010.
Paaswell, R. E. 1967. “Temperature effects on clay soil consolidation.” J. Soil Mech. Found. Div. 93 (Mar): 9–22. https://doi.org/10.1061/JSFEAQ.0000982.
Plum, R., and M. Esrig. 1969. “Some temperature effects on soil compressibility and pore water pressure.” Spec. Rep. 103 (Mar): 231–242.
Robinson, R. G., and M. M. Allam. 1998. “Effect of clay mineralogy on coefficient of consolidation.” Clays Clay Miner. 46 (5): 596–600. https://doi.org/10.1346/CCMN.1998.0460514.
Romero Morales, E. E. 1999. “Characterisation and thermo-hydro-mechanical behaviour of unsaturated Boom clay: An experimental study.” Ph.D. thesis, Dept. d'Enginyeria del Terreny I Cartogràfica, Universitat Politècnica de Catalunya.
Samarakoon, R. A., I. L. Kreitzer, and J. S. McCartney. 2022. “Impact of initial effective stress on the thermo-mechanical behavior of normally consolidated clay.” Geomech. Energy Environ. 32 (Dec): 100407. https://doi.org/10.1016/j.gete.2022.100407.
Sivaprasad, A., and P. Basu. 2023. “Comparative assessment of transient-and steady-state soil thermal conductivity using a specially designed consolidometer.” Géothermics 107 (Jan): 102583. https://doi.org/10.1016/j.geothermics.2022.102583.
Sivrikaya, O. 2001. “Effect of thickness of clay layer on C alpha.” In Proc., 15th Int. Conf. on Soil Mechanics and Geotechnical Engineering, 275–278. Boca Raton, FL: CRC Press.
Sivrikaya, O., and E. Togrol. 2006. “Measurement of side friction between specimen and consolidation ring with newly designed oedometer cell.” Geotech. Test. J. 29 (1): 87–94.
Sultan, N., P. Delage, and Y. Cui. 2002. “Temperature effects on the volume change behaviour of Boom clay.” Eng. Geol. 64 (2–3): 135–145. https://doi.org/10.1016/S0013-7952(01)00143-0.
Sutman, M., T. Brettmann, and C. G. Olgun. 2019. “Full-scale in-situ tests on energy piles: Head and base-restraining effects on the structural behaviour of three energy piles.” Geomech. Energy Environ. 18 (Mar): 56–68. https://doi.org/10.1016/j.gete.2018.08.002.
Tamizdoust, M. M., and O. Ghasemi-Fare. 2022. “Assessment of thermal, hydraulic, and mechanical constitutive relations on the temperature-induced stress and pore fluid pressure in saturated clays.” Comput. Geotech. 145 (May): 104686. https://doi.org/10.1016/j.compgeo.2022.104686.
Tanaka, N., J. Graham, and T. Crilly. 1997. “Stress-strain behaviour of reconstituted illitic clay at different temperatures.” Eng. Geol. 47 (4): 339–350. https://doi.org/10.1016/S0013-7952(96)00113-5.
Taylor, D. W. 1948. Vol. 66 of Fundamentals of soil mechanics. Philadelphia: Lippincott Williams & Wilkins.
Towhata, I., P. Kuntiwattanaku, I. Seko, and K. Ohishi. 1993. “Volume change of clays induced by heating as observed in consolidation tests.” Soils Found. 33 (4): 170–183. https://doi.org/10.3208/sandf1972.33.4_170.
Vega, A., and J. S. McCartney. 2014. “Cyclic heating effects on thermal volume change of silt.” Environ. Geotech. 2 (5): 257–268. https://doi.org/10.1680/envgeo.13.00022.
Villar, M. V., and A. Lloret. 2004. “Influence of temperature on the hydro-mechanical behaviour of a compacted bentonite.” Appl. Clay Sci. 26 (1–4): 337–350. https://doi.org/10.1016/j.clay.2003.12.026.
Watabe, Y., K. Udaka, M. Kobayashi, T. Tabata, and T. Emura. 2008. “Effects of friction and thickness on long-term consolidation behavior of Osaka Bay clays.” Soils Found. 48 (4): 547–561. https://doi.org/10.3208/sandf.48.547.
Ye, W.-M., Y. Zhang, B. Chen, Z. Zheng, Y.-G. Chen, and Y.-J. Cui. 2012. “Investigation on compression behaviour of highly compacted GMZ01 bentonite with suction and temperature control.” Nucl. Eng. Des. 252 (Nov): 11–18. https://doi.org/10.1016/j.nucengdes.2012.06.037.
Yin, J.-H., and J. Graham. 1996. “Elastic visco-plastic modelling of one-dimensional consolidation.” Géotechnique 46 (3): 515–527. https://doi.org/10.1680/geot.1996.46.3.515.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 1, 2023
Accepted: Feb 6, 2024
Published online: May 24, 2024
Published in print: Aug 1, 2024
Discussion open until: Oct 24, 2024
ASCE Technical Topics:
- Consolidated soils
- Effective stress
- Engineering fundamentals
- Engineering mechanics
- Geomechanics
- Geotechnical engineering
- Measurement (by type)
- Soil dynamics
- Soil mechanics
- Soil pressure
- Soils (by type)
- Static loads
- Statics (mechanics)
- Stress (by type)
- Structural analysis
- Structural engineering
- Temperature effects
- Temperature measurement
- Thermal loads
- Thermal properties
- Thermodynamics
- Vertical loads
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.