Three-Dimensional Coupled Finite-Element Analyses of the Seismic Performance of Onshore Wind Turbines on Liquefiable Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 5
Abstract
In recent decades, research on renewable energy has been boosted by the emerging awareness of energy security and climate change and their consequences, such as the global cost of adapting to the climate impacts. Both onshore and offshore wind turbine farms have been considered as one of the main alternatives to fossil fuels. Their development currently involves seismic-prone areas, such as the Californian coastline and East Asia, where the risk of soil liquefaction is significant. Onshore wind turbines (OWTs) typically are founded on shallow rafts. Their operation can be affected strongly by the simultaneous presence of intense earthquakes and wind thrust, which may cause remarkable permanent tilting and loss of serviceability. In these conditions, accurate evaluation of the seismic performance of these structures requires the development of well-validated numerical tools capable of capturing the cyclic soil behavior and the build-up and contextual dissipation of seismic-induced pore-water pressures. In this paper, a numerical model developed in OpenSees, calibrated against the results of dynamic centrifuge tests, was used to evaluate the influence of some ground motion intensity Measures of the seismic behavior of OWTs included the amplitude, frequency content, strong-motion duration, and Arias intensity (energy content) of the earthquake, together with the effect of a coseismal wind thrust, which is not well explored in the literature. The seismic performance of an OWT was assessed in terms of peak and permanent settlement and tilting, the latter of which was compared with the threshold of 0.5° typically adopted in practice.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The centrifuge experiment was performed with the excellent help of technicians at the Schofield Centre of Cambridge University. This support is acknowledged.
References
Adamidis, O., and S. P. G. Madabhushi. 2015. “Use of viscous pore fluids in dynamic centrifuge modelling.” Int. J. Phys. Modell. Geotech. 15 (3): 141–149. https://doi.org/10.1680/jphmg.14.00022.
Adamidis, O., and S. P. G. Madabhushi. 2022. “Rocking response of structures with shallow foundations on thin liquefiable layers.” Géotechnique 72 (2): 127–145. https://doi.org/10.1680/jgeot.19.P.077.
Arias, A. 1970. “A measure of earthquake intensity.” In Seismic design for nuclear power plants, edited by R. Hansen, 438–483. Cambridge, MA: MIT Press.
Chen, G., D. Zhao, W. Chen, and C. H. Juang. 2019. “Excess pore-water pressure generation in cyclic undrained testing.” J. Geotech. Geoenviron. Eng. 145 (7): 04019022. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002057.
Dafalias, Y. F., and M. T. Manzari. 2004. “Simple plasticity sand model accounting for fabric change effects.” J. Eng. Mech. 130 (6): 622–634. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:6(622).
Desmond, C., J. Murphy, L. Blonk, and W. Haans. 2016. “Description of an 8 MW reference wind turbine.” J. Phys.: Conf. Ser. 753 (9): 092013. https://doi.org/10.1088/1742-6596/753/9/092013.
DNV (Det Norske Veritas). 2010. Design of offshore wind turbine structures. DNV-OS-J101. Høvik, Norway: DNV.
DNV (Det Norske Veritas). 2018. Support structures for wind turbines. DNVGL-ST-0126. Høvik, Norway: DNV.
DNV (Det Norske Veritas). 2021. Seismic design of wind power plants. DNV-RP-0585. Høvik, Norway: DNV.
Gaudio, D., and S. Rampello. 2016. “Dynamic soil-structure interaction of bridge-pier caisson foundations.” Procedia Eng. 158 (Jan): 146–151. https://doi.org/10.1016/j.proeng.2016.08.420.
Gaudio, D., J. Seong, S. K. Haigh, G. M. B. Viggiani, S. P. G. Madabhushi, R. Shrivatsava, R. Veluvolu, and P. Padhy. 2023. “Boundary effects on dynamic centrifuge modelling of onshore wind turbines on liquefiable soils.” Int. J. Phys. Modell. Geotech. 23 (1): 16–34. https://doi.org/10.1680/jphmg.21.00085.
Idriss, I. M., and H. B. Seed. 1968. “Seismic response of horizontal soil layers.” J. Soil Mech. Found. Div. 94 (4): 1003–1031. https://doi.org/10.1061/JSFEAQ.0001163.
Kaynia, A. M. 2019. “Seismic considerations in design of offshore wind turbines.” Soil Dyn. Earthquake Eng. 124 (Sep): 399–407. https://doi.org/10.1016/j.soildyn.2018.04.038.
Kementzetzidis, E., S. Corciulo, W. G. Versteijen, and F. Pisanò. 2019. “Geotechnical aspects of offshore wind turbine dynamics from 3D non-linear soil-structure simulations.” Soil Dyn. Earthquake Eng. 120 (May): 181–199. https://doi.org/10.1016/j.soildyn.2019.01.037.
Kramer, S. L. 1996. Geotechnical earthquake engineering. London: Pearson.
Kuhlemeyer, R. L., and J. Lysmer. 1973. “Finite element method accuracy for wave propagation problems.” J. Soil Mech. Found. Div. 99 (5): 421–427. https://doi.org/10.1061/JSFEAQ.0001885.
Madabhushi, S. P. G., S. K. Haigh, N. E. Houghton, and E. Gould. 2012. “Development of a servo-hydraulic earthquake actuator for the Cambridge Turner beam centrifuge.” Int. J. Phys. Modell. Geotech. 12 (2): 77–88. https://doi.org/10.1680/ijpmg.11.00013.
Madabhushi, S. P. G., N. E. Houghton, and S. K. Haigh. 2006. “A new automatic sand pourer for model preparation at University of Cambridge.” In Proc., 6th Int. Conf. on Physical Modelling in Geotechnics, edited by C. W. W. Ng, L. M. Zhang, and Y. H. Wang, 217–222. London: Taylor and Francis.
Madabhushi, S. P. G., D. Patel, and S. K. Haigh. 2005. Geotechnical aspects of the Bhuj earthquake. London: Institution of Structural Engineers.
Newmark, N. M. 1959. “A method of computation for structural dynamics.” J. Eng. Mech. Div. 85 (3): 67–94. https://doi.org/10.1061/JMCEA3.0000098.
Panagoulias, S., C. de Winter, S. T. Navalkar, and A. Nernheim. 2023. “Sensitivity of the seismic response of monopile-supported offshore wind turbines to soil variability.” Ocean Eng. 268 (Jan): 113545. https://doi.org/10.1016/j.oceaneng.2022.113545.
Ramirez, J., A. R. Barrero, L. Chen, S. Dashti, A. Ghofrani, M. Taiebat, and P. Arduino. 2018. “Site response in a layered liquefiable deposit: Evaluation of different numerical tools and methodologies with centrifuge experimental results.” J. Geotech. Geoenviron. Eng. 144 (10): 04018073. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001947.
Salvatore, E., R. Proia, G. Modoni, E. Andò, and G. Viggiani. 2017. “Influenza delle condizioni sperimentali delle prove triassiali su sabbie.” [In Italian.] In Proc., Incontro Annuale dei Ricercatori di Geotecnica 2017, 1–6. Potenza, Italy: Editrice Universosud.
Scott, M. H., and G. L. Fenves. 2010. “Krylov subspace accelerated Newton algorithm: Application to dynamic progressive collapse simulation of frames.” J. Struct. Eng. 136 (5): 473–480. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000143.
Seong, J., S. K. Haigh, S. P. G. Madabhushi, R. Shrivastava, R. Veluvolu, and P. Padhy. 2022. “On seismic protection of wind turbine foundations founded on liquefiable soils.” Soil Dyn. Earthquake Eng. 159 (Aug): 107327. https://doi.org/10.1016/j.soildyn.2022.107327.
Taiebat, M., B. Jeremić, Y. F. Dafalias, A. M. Kaynia, and Z. Cheng. 2010. “Propagation of seismic waves through liquefied soils.” Soil Dyn. Earthquake Eng. 30 (4): 236–257. https://doi.org/10.1016/j.soildyn.2009.11.003.
Tarque Ruiz, S. N. 2020. “Programa compilado OpenSees, mayo 2020. Peru.” Accessed March 28, 2023. https://www.researchgate.net/publication/377415389_Compiled_code_for_OpenSees?channel=doi&linkld=65a9210fa59bf45fc9d52ad6&showFulltext=true.
Trifunac, M. D., and A. G. Brady. 1975. “A study on the duration of strong earthquake ground motion.” Bull. Seismol. Soc. Am. 65 (3): 581–626. https://doi.org/10.1785/BSSA0650030581.
Vacareanu, V., E. Kementzetzidis, and F. Pisano. 2019. “3D FE seismic analysis of a monopile-supported offshore wind turbine in a non-liquefiable soil deposit.” In Proc., 2nd Int. Conf. on Natural Hazards and Infrastructure (ICONHIC2019), edited by G. Gazetas and I. Anastasopoulos, 1–11. Athens, Greece: National Technical Univ. of Athens.
Veletsos, A. S., and J. W. Meek. 1974. “Dynamic behaviour of building-foundation systems.” Earthquake Eng. Struct. Dyn. 3 (2): 121–138. https://doi.org/10.1002/eqe.4290030203.
Yang, Z., J. Lu, and A. Elgamal. 2008. OpenSees soil models and solid-fluid fully coupled elements: User’s manual. San Diego: Dept. of Structural Engineering, Univ. of California.
Zienkiewicz, O. C., C. T. Chang, and P. Bettess. 1980. “Drained, undrained, consolidating and dynamic behaviour assumptions in soils.” Géotechnique 30 (4): 385–395. https://doi.org/10.1680/geot.1980.30.4.385.
Zienkiewicz, O. C., and T. Shiomi. 1984. “Dynamic behaviour of saturated porous media; the generalized Biot formulation and its numerical solution.” Int. J. Numer. Anal. Methods Geomech. 8 (1): 71–96. https://doi.org/10.1002/nag.1610080106.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Mar 28, 2023
Accepted: Dec 26, 2023
Published online: Feb 29, 2024
Published in print: May 1, 2024
Discussion open until: Jul 29, 2024
ASCE Technical Topics:
- Analysis (by type)
- Earthquake engineering
- Energy engineering
- Energy sources (by type)
- Engineering fundamentals
- Engines
- Equipment and machinery
- Finite element method
- Geomechanics
- Geotechnical engineering
- Methodology (by type)
- Models (by type)
- Numerical methods
- Numerical models
- Renewable energy
- Seismic effects
- Seismic tests
- Soil liquefaction
- Soil mechanics
- Soil properties
- Tests (by type)
- Three-dimensional analysis
- Turbines
- Wind power
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.