Geotechnical Characterization of a Tidal Estuary Mudflat Using Portable Free-Fall Penetrometers
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 1
Abstract
This study investigates the geotechnical characteristics of a soft tidal mudflat in the Great Bay Estuary, New Hampshire. Laboratory testing of surficial sediment samples of the upper 10 cm and field observations from a portable free-fall penetrometer (PFFP) were used to characterize soil strength properties (coefficient of consolidation and undrained shear strength). Pore pressure measurements from the PFFP were analyzed using a square-root of time method to estimate and empirical correlations from the literature to estimate the coefficient of consolidation. Undrained shear strengths were estimated from the PFFP deceleration using cone factors of 10–12 and a strain rate correction factor of 0, resulting in undrained shear strengths of 0.5–1.1 kPa. Laboratory testing using miniature vane shear testing found the undrained shear strength to be 0.6–1.8 kPa. Both techniques indicate soft soils. The PFFP deceleration profiles also suggest the presence of layering within the seabed, a situation at the field site that could arise from environmental factors, such as winter ice formation and seasonal erosion. The coefficients of horizontal consolidation estimated with the PFFP () were 1–2 orders of magnitude greater than the coefficients of vertical consolidation measured during oedometer testing ( across all samples and load steps). Effects impacting the coefficient of consolidation such as to mismatches between sample depths and the resting depth of the penetrometer, sample disturbance, anisotropy, differences in loading conditions, and limitations associated with deriving values from literature charts are discussed. The results suggest that PFFPs are able to well-characterize the geotechnical properties of tidal mudflat soils and contribute to improving the understanding of the geotechnical parameters of undrained shear strength and coefficients of consolidation.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository online in accordance with funder data retention policies (Paprocki 2022).
Acknowledgments
The authors acknowledge funding from the Office of Naval Research (ONR) through Grants N00014-18-2435 and N00014-22-1-2401. The authors would like to thank Jang-Geun Choi and Jon Hunt of UNH for assistance with field measurements and Albin Rosado of Virginia Tech for assistance with laboratory measurements. Finally, the authors would like to thank the two anonymous reviewers and the associate editor for their thoughtful input that helped improve the quality of this manuscript.
References
Abelev, A., J. Simeonov, and P. Valent. 2009a. “Numerical investigation of dynamic free-fall penetrometers in soft cohesive marine sediments using a finite element approach.” In Proc., OCEANS 2009, 1–8. New York: IEEE.
Abelev, A., K. Tubbs, and P. Valent. 2009b. “Numerical investigation of dynamic free-fall penetrometers in soft cohesive marine sediments using a finite difference approach.” In Proc., OCEANS 2009, 1–10. New York: IEEE.
Albatal, A. 2018. “Advancement of using portable free fall penetrometers for geotechnical site characterization of energetic sandy nearshore areas.” Ph.D. thesis, Faculty of the Virginia Polytechnic Institute and State Univ., Virginia Tech.
Amos, C. L., N. A. Van Wagoner, and G. R. Daborn. 1988. “The influence of subaerial exposure on the bulk properties of fine-grained intertidal sediment from Minas Basin, Bay of Fundy.” Estuarine Coastal Shelf Sci. 27 (1): 1–13. https://doi.org/10.1016/0272-7714(88)90028-5.
Anderson, F. E. 1983. “The northern muddy intertidal: Seasonal factors controlling erosion and deposition—A review.” Supplement, Can. J. Fish. Aquat. Sci. 40 (S1): s143–s159. https://doi.org/10.1139/f83-277.
ASTM. 2000. Standard test method for laboratory miniature vane shear test for saturated fine-grained clayey soil. D4648/D4648M-16. West Conshohocken, PA: ASTM.
ASTM. 2005. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test method for electronic friction cone and piezocone penetration testing. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM D2487-17. West Conshohocken, PA: ASTM.
Aubeny, C. P., and H. Shi. 2006. “Interpretation of impact penetration measurements in soft clays.” J. Geotech. Geoenviron. Eng. 132 (6): 770–777. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:6(770).
Baligh, M. M., and J. Levadoux. 1986. “Consolidation after undrained piezocone penetration. II: Interpretation.” J. Geotech. Eng. 112 (7): 727–745. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:7(727).
Bilgili, A., J. A. Proehl, D. R. Lynch, K. W. Smith, and M. R. Swift. 2005. “Estuary/ocean exchange and tidal mixing in a Gulf of Maine Estuary: A Lagrangian modeling study.” Estuarine Coastal Shelf Sci. 65 (4): 607–624. https://doi.org/10.1016/j.ecss.2005.06.027.
Bilici, C., N. Stark, C. T. Friedrichs, and G. M. Massey. 2019. “Coupled sedimentological and geotechnical data analysis of surficial sediment layer characteristics in a tidal estuary.” Geo-Mar. Lett. 39 (3): 175–189. https://doi.org/10.1007/s00367-019-00565-3.
Bray, J. D., and R. B. Sancio. 2006. “Assessment of the liquefaction susceptibility of fine-grained soils.” J. Geotech. Geoenviron. Eng. 132 (9): 1165–1177. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:9(1165).
Brilli, N. C., and N. Stark. 2020. “Variations in sediment strength across a sandy peninsula.” In Proc., Geo-Congress 2020, 769–778. Reston, VA: ASCE.
Buckley, D. E., W. G. MacKinnon, R. E. Cranston, and H. A. Christian. 1994. “Problems with piston core sampling: Mechanical and geochemical diagnosis.” Mar. Geol. 117 (1–4): 95–106. https://doi.org/10.1016/0025-3227(94)90008-6.
Burns, S. E., and P. W. Mayne. 1998. “Monotonic and dilatory pore-pressure decay during piezocone tests in clay.” Can. Geotech. J. 35 (6): 1063–1073. https://doi.org/10.1139/t98-062.
Celikkol, B., and R. P. Reichard. 1976. Hydrodynamic model of the Great Bay estuarine system. Part 1. UNH-SG, 153. Washington, DC: National Oceanic and Atmospheric Administration.
Chow, S. H., and D. W. Airey. 2013. “Soil strength characterisation using free-falling penetrometers.” Géotechnique 63 (13): 1131–1143. https://doi.org/10.1680/geot.12.P.129.
Chow, S. H., C. D. Óloughlin, and M. F. Randolph. 2014. “Soil strength estimation and pore pressure dissipation for free-fall piezocone in soft clay.” Géotechnique 64 (10): 817–827. https://doi.org/10.1680/geot.14.P.107.
Cook, S. E., T. C. Lippmann, and J. D. Irish. 2019. “Modeling nonlinear tidal evolution in an energetic estuary.” Ocean Modell. 136 (Mar): 13–27. https://doi.org/10.1016/j.ocemod.2019.02.009.
Dayal, U., J. H. Allen, and J. M. Jones. 1975. “Use of an impact penetrometer for the evaluation of the in-situ strength of marine sediments.” Mar. Geotechnol. 1 (2): 73–89. https://doi.org/10.1080/10641197509388155.
Ding, D., and J. E. Loehr. 2019. “Variability and bias in undrained shear strength from different sampling and testing methods.” J. Geotech. Geoenviron. Eng. 145 (10): 04019082. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002121.
Dorvinen, J., N. Stark, B. Hatcher, M. Hatcher, V. Leys, and A. Kopf. 2018. “In situ assessment of sediment erosion and consolidation state using a free-fall penetrometer: Sydney Harbour, Nova Scotia.” J. Waterw. Port Coastal Ocean Eng. 144 (2): 04017041. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000423.
Duncan, J. M., S. G. Wright, and T. L. Brandon. 2014. Soil strength and slope stability. New York: Wiley.
Dyer, K. R. 1998. “The typology of intertidal mudflats.” Geol. Soc. Spec. Publ. 139 (1): 11–24. https://doi.org/10.1144/GSL.SP.1998.139.01.02.
Dyer, K. R., M. C. Christie, and E. W. Wright. 2000. “The classification of intertidal mudflats.” Cont. Shelf Res. 20 (10–11): 1039–1060. https://doi.org/10.1016/S0278-4343(00)00011-X.
Ertürk, Ş. N., A. Bilgili, M. R. Swift, W. S. Brown, B. Çelikkol, J. T. C. Ip, and D. R. Lynch. 2002. “Simulation of the Great Bay Estuarine System: Tides with tidal flats wetting and drying.” J. Geophys. Res. 107 (C5): 3038. https://doi.org/10.1029/2001JC000883.
Jaber, R., and N. Stark. 2023. “Geotechnical properties from portable free fall penetrometer in coastal environments.” J. Geotech. Geoenviron. Eng. 149 (12). https://doi.org/10.1061/JGGEFK.GTENG-11013.
Jones, G. A., and D. J. A. Van Zyl. 1981. “The piezometric probe—A useful investigation tool.” In Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, 536–537. Rotterdam, Netherlands: A.A Balkema.
Kiptoo, D. K. 2020. “In-situ geotechnical charcterization of soft estuarine surficial sediments using a portable free fall penetrometer.” Masters thesis, Charles E. Via, Jr. Dept. of Civil and Environmental Engineering, Virginia Tech.
Ladd, C. C., R. Foott, F. Schlosser, K. Ishihara, and H. G. Poulos. 1977. “Stress-deformation and strength characteristics.” In Proc., 9th Int. Conf. on Soil Mechanics and Foundation Engineering. London: International Society for Soil Mechanics and Geotechnical Engineering.
Lee, H. J., and J. E. Clausner. 1979. Seafloor soil sampling and geotechnical parameter determination–Handbook. Alexandria, VA: Naval Facilities Engineering Command.
Lee, K.-M., and P. C. C. Ng. 1999. “A geotechnical investigation of marine deposits in a nearshore seabed for land reclamation.” Can. Geotech. J. 36 (6): 981–1000. https://doi.org/10.1139/t99-063.
Levadoux, J. 1980. “Pore pressures in clays due to cone penetration.” Ph.D. thesis, Dept. of Civil Engineering, Massachusetts Institute of Technology.
Levadoux, J., and M. M. Baligh. 1986. “Consolidation after undrained piezocone penetration. I: Prediction.” J. Geotech. Eng. 112 (7): 707–726. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:7(707).
Lucking, G., N. Stark, T. Lippmann, and S. Smyth. 2017. “Variability of in situ sediment strength and pore pressure behavior of tidal estuary surface sediments.” Geo-Mar. Lett. 37 (5): 441–456. https://doi.org/10.1007/s00367-017-0494-6.
Lunne, T., and M. Long. 2006. “Review of long seabed samplers and criteria for new sampler design.” Mar. Geol. 226 (1–2): 145–165. https://doi.org/10.1016/j.margeo.2005.07.014.
Matsui, T., and N. Abe. 1981. “Shear mechanisms of vane test in soft clays.” Soils Found. 21 (4): 69–80. https://doi.org/10.3208/sandf1972.21.4_69.
Mayne, P. W., and J. Peuchen. 2018. “Evaluation of CPTU Nkt cone factor for undrained strength of clays.” In Proc., 4th Int. Symp. on Cone Penetration Testing, CPT 2018, 423–429. Leiden, Netherlands: CRC Press/Balkema.
Morton, J. P., C. D. O’Loughlin, and D. J. White. 2014. “Strength assessment during shallow penetration of a sphere in clay.” In Proc., Institution of Civil Engineers: Structures and Buildings, 262–266. https://doi.org/10.1680/geolett.14.00049.
Morton, J. P., C. D. O’Loughlin, and D. J. White. 2016a. “Centrifuge modelling of an instrumented free-fall sphere for measurement of undrained strength in fine-grained soils.” Can. Geotech. J. 53 (6): 918–929. https://doi.org/10.1139/cgj-2015-0242.
Morton, J. P., C. D. O’Loughlin, and D. J. White. 2016b. “Estimation of soil strength in fine-grained soils by instrumented free-fall sphere tests.” Géotechnique 66 (12): 959–968. https://doi.org/10.1680/jgeot.15.P.038.
Mumtaz, M. B., and N. Stark. 2020. “Pore pressure dissipation induced by high-velocity impacts of a portable free-fall penetrometer in clays.” J. Geotech. Geoenviron. Eng. 146 (9): 05020008. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002273.
NAVFAC (Naval Facilities Engineering Systems Command). 1986. Soil mechanics design. Alexandria, VA: NAVFAC.
Nazem, M., J. P. Carter, D. W. Airey, and S. H. Chow. 2012. “Dynamic analysis of a smooth penetrometer free-falling into uniform clay.” Géotechnique 62 (10): 893–905. https://doi.org/10.1680/geot.10.P.055.
O’Loughlin, C. D., C. Gaudin, J. P. Morton, and D. J. White. 2014. “MEMS accelerometers for measuring dynamic penetration events in geotechnical centrifuge tests.” Int. J. Phys. Modell. Geotech. 14 (2): 31–39. https://doi.org/10.1680/ijpmg.13.00020.
Paprocki, J. 2022. Data associated with a framework for assessing lower-bound bearing capacity of sandy coastal sediments from remotely sensed imagery. Blacksburg, VA: Virginia Tech.
Park, N. W. 2019. “Geostatistical integration of field measurements and multi-sensor remote sensing images for spatial prediction of grain size of intertidal surface sediments.” J. Coast. Res. 90 (sp1): 190–196. https://doi.org/10.2112/SI90-023.1.
Reeve, B., N. Stark, and P. Mewis. 2018. “Cross-shore variations in sediment strength at a sandy beach.” Proc. Coastal Eng. Conf. 36 (36): 83. https://doi.org/10.9753/icce.v36.sediment.83.
Richards, A. F. 1988. Vane shear strength testing in soils: Field and laboratory studies. Edited by A. Richards. West Conshohocken, PA: ASTM.
Robertson, P. K., and K. L. Cabal. 2015. Guide to cone penetration testing. Signal Hill, CA: Gregg Drilling & Testing.
Robertson, P. K., J. P. Sully, D. J. Woeller, T. Lunne, J. J. M. Powell, and D. G. Gillespie. 1992. “Estimating coefficient of consolidation from piezocone tests.” Can. Geotech. J. 29 (4): 539–550. https://doi.org/10.1139/t92-061.
Roy, M., and A. Leblanc. 1988. Factors affecting the measurements and interpretation of the vane strength in soft sensitive clays. West Conshohocken, PA: ASTM.
Sachs, P., and S. Raymond. 1965. “A new unattached sediment sampler.” J. Mar. Res. 23 (203): 44–53.
Schlue, B. F., T. Moerz, and S. Kreiter. 2010. “Influence of shear rate on undrained vane shear strength of organic harbor mud.” J. Geotech. Geoenviron. Eng. 136 (10): 1437–1447. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000356.
Seifert, A., and A. Kopf. 2012. “Modified dynamic CPTU penetrometer for fluid mud detection.” J. Geotech. Geoenviron. Eng. 138 (2): 203–206. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000563.
Seifert, A., S. Stegmann, T. Mörz, M. Lange, T. Wever, and A. Kopf. 2008. “In situ pore-pressure evolution during dynamic CPT measurements in soft sediments of the western Baltic Sea.” Geo-Mar. Lett. 28 (4): 213–227. https://doi.org/10.1007/s00367-008-0102-x.
Shepard, F. P. 1954. “Nomenclature based on sand-silt-clay ratios.” J. Sediment. Res. 14 (3): 151–158. https://doi.org/10.1097/00006534-195409000-00011.
Shi, Z., and J. Y. Chen. 1996. “Morphodynamics and sediment dynamics on intertidal mudflats in China (1961–1994).” Cont. Shelf Res. 16 (15): 1909–1926. https://doi.org/10.1016/0278-4343(95)00059-3.
Stark, N., A. E. Hay, and G. Trowse. 2014. “Cost-effective geotechnical and sedimentological early site assessment for ocean renewable energies.” In Proc., 2014 Oceans—St. John’s, 1–8. New York: IEEE.
Stark, N., G. M. Massey, and C. T. Fridrichs. 2020. Improved penetrometer performance in stratified sediment for cost-effective characterization, monitoring and management of submerged munitions sites. Alexandria, VA: Strategic Environmental Research and Development Program.
Stark, N., N. Parasie, and J. Peuchen. 2021. “Free fall penetrometer deployment strategies and the impact on data analysis: Pilot weight trigger versus winch-deployed.” In Proc., 4th Int. Symp. on Frontiers in Offshore Geotechnics. Hawthorne, NJ: Deep Foundations Institute.
Stark, N., N. Parasie, and J. Peuchen. 2022. “Deepwater soil investigation using a free fall penetrometer.” Can. Geotech. J. 59 (12): 2196–2201. https://doi.org/10.1139/cgj-2022-0029.
Stark, N., B. Quinn, K. Ziotopoulou, and H. Lantuit. 2015. “Geotechnical investigation of pore pressure behavior of muddy seafloor sediments in an arctic permafrost environment.” In Proc., Int. Conf. on Offshore Mechanics and Arctic Engineering. New York: American Society of Mechanical Engineers.
Stark, N., B. Radosavljevic, B. Quinn, and H. Lantuit. 2017. “Application of portable free-fall penetrometer for geotechnical investigation of arctic nearshore zone.” Can. Geotech. J. 54 (1): 31–46. https://doi.org/10.1139/cgj-2016-0087.
Stegmann, S., T. Mörz, and A. Kopf. 2006. “Initial results of a new free fall-cone penetrometer (FF-CPT) for geotechnical in situ characterisation of soft marine sediments.” Nor. Geol. Tidsskr. 86 (3): 199–208.
Steiner, A., A. J. Kopf, J. S. L’Heureux, S. Kreiter, S. Stegmann, H. Haflidason, and T. Moerz. 2014. “In situ dynamic piezocone penetrometer tests in natural clayey soils—A reappraisal of strain-rate corrections.” Can. Geotech. J. 51 (3): 272–288. https://doi.org/10.1139/cgj-2013-0048.
Sully, J. P., P. K. Robertson, R. G. Campanella, and D. J. Woeller. 1999. “An approach to evaluation of field CPTU dissipation data in overconsolidated fine-grained soils.” Can. Geotech. J. 36 (2): 369–381. https://doi.org/10.1139/t98-105.
Tanaka, H. 1994. “Vane shear strength of a Japanese marine clay and applicability of Bjerrum’s correction factor.” Soils Found. 34 (3): 39–48. https://doi.org/10.3208/sandf1972.34.3_39.
Teh, C. I., and G. T. Houlsby. 1991. “An analytical study of the cone penetration test in clay.” Géotechnique 41 (1): 17–34. https://doi.org/10.1680/geot.1991.41.1.17.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. New York: Wiley.
Thompson, C. 1977. “The role of ice as an agent of erosion and deposition of an estuarine tidal flat.” M.S. thesis, Dept. of Earth Sciences, Univ. of New Hampshire.
Turgeon, D. 1976. “Distribution of the planktonic larvae of some benthic invertebrates within the Piscataqua-Great Bay estuary.” Ph.D. thesis, Dept. of Zoology, Univ. of New Hampshire.
Vesić, A. S. 1972. “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found. Div. 98 (3): 265–290. https://doi.org/10.1061/JSFEAQ.0001740.
Ward, L. G. 1995. Sedimentology of the Lower Great Bay/Piscataqua River Estuary. Supplemental report prepared for the Estuarine ecological risk assessment for Portsmouth Naval Shipyard Kittery, Maine, 102. Monterey, CA: United States Department of the Navy.
Wengrove, M. E., D. L. Foster, L. H. Kalnejais, V. Percuoco, and T. C. Lippmann. 2015. “Field and laboratory observations of bed stress and associated nutrient release in a tidal estuary.” Estuarine Coastal Shelf Sci. 161 (Aug): 11–24. https://doi.org/10.1016/j.ecss.2015.04.005.
Widjaja, B. 2010. “Undrained shear strength and compressibility at liquid limit.” In Proc., 1st Makassar Int. Conf. on Civil Engineering (MICCE2010), 741–749. Makassar, Indonesia: Hasanuddin Univ.
Winterwerp, J. C., W. G. M. van Kesteren, B. van Prooijen, and W. Jacobs. 2012. “A conceptual framework for shear flow–induced erosion of soft cohesive sediment beds.” J. Geophys. Res. Oceans 117 (Aug): 1–17. https://doi.org/10.1029/2012JC008072.
Xu, W. 2000. “Mass physical sediment properties and trends in a Wadden sea tidal basin.” In Berichte, Fachbereich Geowissenschaften, Universität Bremen. Bremen, Germany: Universität Bremen.
Youd, T. L., and I. M. Idriss. 2001. “Liquefaction resistance of soils: Summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils.” J. Geotech. Geoenviron. Eng. 127 (10): 817–833. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:10(817).
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 150 • Issue 1 • January 2024
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 21, 2022
Accepted: Aug 25, 2023
Published online: Nov 8, 2023
Published in print: Jan 1, 2024
Discussion open until: Apr 8, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.