Discussion of “CPT-Based Axial Capacity Design Method for Driven Piles in Clay”
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 149, Issue 10
Get full access to this article
View all available purchase options and get full access to this article.
References
Azzouz, A. S., M. M. Baligh, and A. J. Whittle. 1990. “Shaft resistance of piles in clay.” J. Geotech. Eng. 116 (2): 205–221. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:2(205).
Azzouz, A. S., and M. J. Morrison. 1988. “Field measurements on model pile in two clay deposits.” J. Geotech. Eng. 114 (1): 104–121. https://doi.org/10.1061/(ASCE)0733-9410(1988)114:1(104).
Bond, A. J., and R. J. Jardine. 1991. “Effects of installing displacement piles in high OCR clay.” Géotechnique 41 (3): 341–363. https://doi.org/10.1680/geot.1991.41.3.341.
Koizumi, Y., and K. Ito. 1967. “Field tests with respect to pile driving and bearing capacity of piled foundation.” Soils Found. 7 (3): 30–53. https://doi.org/10.3208/sandf1960.7.3_30.
Koutsoftas, D. C. 2020. “Discussion of ‘Axisymmetric simulations of cone penetration in saturated clay’ by Diane M. Moug, Ross W. Boulanger, Jason T. DeJong, and Robert A. Jaeger.” J. Geotech. Geoenviron. Eng. 146 (Apr): 07020004. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002211.
Koutsoftas, D. C., and J. A. Fischer. 1976. “In-situ undrained shear strength of two marine clays.” J. Geotech. Eng. Div. 102 (9): 989–1005. https://doi.org/10.1061/AJGEB6.0000327.
Ladd, C. C., and R. Foott. 1974. “New design procedure for stability of soft clays.” J. Geotech. Eng. Div. 100: 763–786.
Lehane, B. M., and R. J. Jardine. 1994a. “Displacement pile behavior in glacial clay.” Can. Geotech. J. 31 (1): 79–90. https://doi.org/10.1139/t94-009.
Lehane, B. M., and R. J. Jardine. 1994b. “Displacement-pile behavior in a soft marine clay.” Can. Geotech. J. 31 (2): 181–191. https://doi.org/10.1139/t94-024.
Lehane, B. M., Y. Li, and R. Williams. 2013. “Shaft capacity of displacement piles in clay using the cone penetration test.” J. Geotech Geoenviron. Eng. 139 (2): 253–266. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000749.
Lunne, T. 2002. “Engineering properties of lean lierstranda clay.” In Vol. 2 of Proc., Int. Symp. Yokohama, 177–186. Rotterdam, Netherlands: A. A. Balkema.
Lunne, T., T. Berre, K. H. Andersen, S. Strandvik, and M. Sjursent. 2006. “Effects of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays.” Can. Geotech. J. 43 (7): 726–750. https://doi.org/10.1139/t06-040.
Moore, W. W. 1947. “Experiences with predetermining pile lengths.” Proc. Am. Soc. Civ. Eng. 73 (9): 1341–1358.
Rizk, A., A. Kodsy, M. Iskander, and M. Machairas. 2022. “Efficacy of design methods for predicting the capacity of large-diameter open-ended piles.” J. Geotech. Geoenviron. Eng. 148 (10). https://doi.org/10.1061/(ASCE)GT.1943-5606.0002824.
Roy, M., R. Blanchet, F. Tavernas, and P. La Rochelle. 1979. “Behavior of a sensitive clay during pile driving.” In Proc., 32nd Canadian Geotechnical Conf. on the Behavior of Soft Soils, 4.28–4.48. Toronto: Canadian Geotechnical Society.
Sangrey, D. A. 1972. “Naturally cemented sensitive clays.” Géotechnique 22 (1): 139–152. https://doi.org/10.1680/geot.1972.22.1.139.
Singh, F., and D. J. Henkel, and D. A. Sangrey. 1973. “Shear and K0 Swelling of overconsolidated clay.” In Proc., 8th Int. Conf. on Soil Mechanics and Foundation Engineering, 367–376. London: International Society for Soil Mechanics and Geotechnical Engineering.
Tavenas, F., and S. Leroueil. 1981. “Creep and failure of slopes in clays.” Can. Geotech. J. 18 (1): 106–120. https://doi.org/10.1139/t81-010.
Terzaghi, K., and R. B. Peck. 1967. Soil mechanics in engineering practice. 2nd ed. New York: Wiley.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. 3rd ed. New York: Wiley.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 149 • Issue 10 • October 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 29, 2022
Accepted: Jan 30, 2023
Published online: Jul 26, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.