Discrete-Element Quantification of the Noncoaxiality of Anisotropic Granular Materials under Orientational Rotational Shear
Publication: Journal of Engineering Mechanics
Volume 150, Issue 9
Abstract
The discrete-element method was employed to investigate the macro- and micromechanical behaviors of anisotropic granular specimens using orientational rotational shear (ORS) tests. The variations in the initial fabric orientation relative to the vertical direction were considered during the sample preparation stage. Several ORS tests were performed on samples with various initial fabrics, stress ratios, and densities. The contact-normal-based fabric tensor was considered as a measure of the internal structure of the granular assembly and employed in the detailed analysis. The proportional and noncoaxial components of the fabric tensor, with reference to the deviatoric stress tensor, exhibited similar sinusoidal evolution trends. The initial fabric represented by the bedding plane angle affected the phase angle of the cyclic variation waveforms of the proportional and noncoaxial components, whereas the stress ratio and initial density primarily affected their amplitude and magnitude. The decomposition of the strain increment tensor with respect to the stress indicated that the noncoaxial part was dominant, but the orthogonal component gradually vanished with an increase in the deviatoric strain, whereas the noncoaxial part decreased with an increase in the stress ratio. The new findings obtained in this study may provide useful guidance for the development of micromechanics-based constitutive models of granular materials subjected to ORS.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The research described in this study is supported by the Natural Science Foundation of China (Grants Nos. 52020105003 and 52338008).
References
Arthur, J. R. F., T. Dunstan, and K. S. Chua. 1979. “Dense sand weakened by continuous principal stress direction rotation.” Géotechnique 29 (1): 91–96. https://doi.org/10.1680/geot.1979.29.1.91.
Bagi, K. 1999. “Microstructural stress tensor of granular assemblies with volume forces.” J. Appl. Mech. 66 (4): 934–936. https://doi.org/10.1115/1.2791800.
Broms, B. B., and A. O. Casbarian. 1965. “Effects of rotation of the principal stress axes and of the intermediate stress on shear strength.” In Vol. 1 of Proc., 6th Int. Conf. Soil Mechanics, 179–183. Oxford, UK: Pergamon Press.
Cai, Y., H. S. Yu, D. Wanatowski, and X. Li. 2013. “Noncoaxial behavior of sand under various stress paths.” J. Geotech. Geoenviron. Eng. 37 (1): 75–96. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000854.
Chikkadi, V., and P. Schall. 2012. “Nonaffine measures of particle displacements in sheared colloidal glasses.” Phys. Rev. E 85 (3): 031402. https://doi.org/10.1103/PhysRevE.85.031402.
Christoffersen, J., M. M. Mehrabadi, and S. Nematnasser. 1981. “A micro-mechanical description of granular material behavior.” J. Appl. Mech. 48 (2): 339. https://doi.org/10.1115/1.3157619.
Durán, O., N. P. Kruyt, and S. Luding. 2010. “Analysis of three dimensional micro-mechanical strain formulations for granular materials: Evaluation of accuracy.” Int. J. Solids Struct. 47 (2): 251–260. https://doi.org/10.1016/j.ijsolstr.2009.09.035.
Gutierrez, M. 1989. “Behavior of sand during rotation of principal stress directions.” D.Eng. thesis, Dept. of Civil Engineering, Univ. of Tokyo.
Gutierrez, M., K. Ishihara, and I. Towhata. 1991. “Flow theory for sand during rotation of principal stress direction.” Soils Found. 31 (4): 121–132. https://doi.org/10.3208/sandf1972.31.4_121.
Ishihara, K., and S. I. Li. 1972. “Liquefaction of saturated sand in triaxial torsion shear test.” Soils Found. 12 (2): 19–39. https://doi.org/10.3208/sandf1972.12.19.
Ishihara, K., and I. Towhata. 1983. “Sand response to cyclic rotation of principal stress directions as induced by wave loads.” Soils Found. 23 (4): 11–26. https://doi.org/10.3208/sandf1972.23.4_11.
Jefferies, M., D. Shuttle, and K. Been. 2015. “Principal stress rotation as cause of cyclic mobility.” Geotech Res. 2 (2): 66–96. https://doi.org/10.1680/jgere.15.00002.
Jiang, M. J., J. M. Konrad, and S. Leroueil. 2003. “An efficient technique for generating homogeneous specimens for DEM studies.” Comput. Geotech. 30 (7): 579–597. https://doi.org/10.1016/S0266-352X(03)00064-8.
Li, X., D. S. Yang, and H. S. Yu. 2016. “Macro deformation and micro-structure of 3D granular assemblies subjected to rotation of principal stress axes.” Granular Matter 18 (3): 53. https://doi.org/10.1007/s10035-016-0632-2.
Li, X., and H. S. Yu. 2010. “Numerical investigation of granular material behavior under rotational shear.” Géotechnique. 60 (5): 381–394. https://doi.org/10.1680/geot.2010.60.5.381.
Li, X. S. 1997. “Rotational shear effects on ground earthquake response.” Soil Dyn. Earthq. Eng. 16 (1): 9–19. https://doi.org/10.1016/S0267-7261(96)00032-2.
Li, X. S., and Y. F. Dafalias. 2004. “A constitutive framework for anisotropic sand including non-proportional loading.” Géotechnique 54 (1): 41–55. https://doi.org/10.1680/geot.2004.54.1.41.
Li, X. S., and Y. F. Dafalias. 2012. “Anisotropic critical state theory: Role of fabric.” J. Eng. Mech. 138 (3): 263–275. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000324.
Li, X. S., and Y. F. Dafalias. 2015. “Dissipation consistent fabric tensor definition from DEM to continuum for granular media.” J. Mech. Phys. Solids. 78 (May): 141–153. https://doi.org/10.1016/j.jmps.2015.02.003.
Li, X. S., and Y. F. Dafalias. 2020. “Noncoaxiality between two tensors with application to stress rate decomposition and fabric anisotropy variable.” J. Eng. Mech. 146 (3): 04020004. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001730.
Miura, K., S. Miura, and S. Toki. 1986. “Deformation behavior of anisotropic dense sand under principal stress axes rotation.” Soils Found. 26 (1): 36–52. https://doi.org/10.3208/sandf1972.26.36.
Nakata, Y., M. Hyodo, H. Murata, and N. Yasufuku. 1998. “Flow deformation of sands subjected to principal stress rotation.” Soils Found. 38 (2): 115–128. https://doi.org/10.3208/sandf.38.2_115.
O’Sullivan, C. 2011. Particulate discrete element modelling: A geomechanics perspective. Boca Raton, FL: CRC Press.
Satake, M. 1982. “Fabric tensor in granular materials.” In Proc., IUTAM Symp. on Deformation and Failure of Granular Materials, 63–68. Rotterdam, Netherlands: A. A. Balkema.
Symes, M. J., A. Gens, and D. W. Hight. 1988. “Drained principal stress rotation in saturated sand.” Géotechnique 38 (1): 59–81. https://doi.org/10.1680/geot.1988.38.1.59.
Symes, M. J. P. R., A. Gens, and D. W. Hight. 1984. “Undrained anisotropy and principal stress rotation in saturated sand.” Géotechnique 34 (1): 11–27. https://doi.org/10.1680/geot.1984.34.1.11.
Tong, Z. X., J. M. Zhang, Y. L. Yu, and G. Zhang. 2010. “Drained deformation behaviour of anisotropic sands during cyclic rotation of principal stress axes.” J. Geotech. Geoenviron. Eng. 136 (11): 1509–1518. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000378.
Triantafyllos, P. K., V. N. Georgiannou, Y. F. Dafalias, and I. O. Georgopoulos. 2021. “Novel findings on the dilatancy and non-coaxiality of sand under generalised loading.” Acta Geotech. 16 (6): 1699–1734. https://doi.org/10.1007/s11440-020-01100-w.
Vaid, Y. P., A. Sayao, E. H. Hou, and D. Negussey. 1990. “Generalized stress path dependent soil behavior with a new hollow cylinder torsional apparatus.” Can. Geotech. J. 27 (5): 601–616. https://doi.org/10.1139/t90-075.
Wang, R., P. C. Fu, J. M. Zhang, and Y. F. Dafalias. 2019. “Deformation of granular material under continuous rotation of stress principal axes.” Int. J. Geomech. 19 (4): 04019017. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001383.
Wu, Q. X., L. Y. Yan, and Z. X. Yang. 2021. “Discrete element simulations of drained granular material response under multidirectional rotational shear.” Comput. Geotech. 139 (Nov): 104375. https://doi.org/10.1016/j.compgeo.2021.104375.
Wu, Q. X., and Z. X. Yang. 2021. “Novel undrained servomechanism in discrete-element modeling and its application in multidirectional cyclic shearing simulations.” J. Eng. Mech. 147 (3): 04020155. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001896.
Wu, Q. X., Z. X. Yang, and X. Li. 2019. “Numerical simulations of granular material behavior under rotation of principal stresses: Micromechanical observation and energy consideration.” Meccanica 54 (4): 723–740. https://doi.org/10.1007/s11012-018-00939-4.
Wu, Q. X., J. J. Zheng, and Z. X. Yang. 2023. “Effects of initial fabric anisotropy on the undrained rotational shear response of granular material using discrete element simulations.” Acta Geotech. 18 (10): 5175–5194. https://doi.org/10.1007/s11440-023-01927-z.
Xiong, H., L. Guo, Y. Cai, and Z. Yang. 2015. “Experimental study of drained anisotropy of granular soils involving rotation of principal stress direction.” Eur. J. Environ. Civ. Eng. 20 (4): 431–454. https://doi.org/10.1080/19648189.2015.1039662.
Yang, Z. X., X. S. Li, and J. Yang. 2007. “Undrained anisotropy and rotational shear in granular soil.” Géotechnique. 57 (4): 371–384. https://doi.org/10.1680/geot.2007.57.4.371.
Yang, Z. X., and Y. Wu. 2017. “Critical state for anisotropic granular materials: A discrete element perspective.” Int. J. Geomech. 17 (2): 04016054. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000720.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 150 • Issue 9 • September 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Nov 9, 2023
Accepted: Feb 28, 2024
Published online: Jun 21, 2024
Published in print: Sep 1, 2024
Discussion open until: Nov 21, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.