Development of Miniature Tensile-Test System of Intermediate Strain Rate Based on Electromagnetic Launch
Publication: Journal of Engineering Mechanics
Volume 149, Issue 11
Abstract
To study the dynamic properties of intermediate strain rates for filiform or filmy materials, a miniature tensile-test system with an intermediate strain rate based on magnetic resistance actuation is designed herein. The loading part of the system is formed by inertial movement and an electromagnetic launcher, and the testing part is formed by high-speed optical noncontact measurements using a microforce sensor. Constant tension and intermediate speed are realized by designing the inertial motion of a large-mass combined accelerator. Friction and vibration are offset using magnetic attraction. The electromagnetic acceleration force was eliminated by adjusting the length differences, construction, and relative motion of the structures. The stress–strain curves are obtained by synchronizing the strain signal measured using the optical extensometer method and the stress signal measured using the microforce sensor. The system is verified to be miniature, stable, easy to control, accurate for strain rate, economic, and used for small samples. The stability and reliability of the system are verified using speed testing and motion-state photography. Therefore, the designed system is miniature, easy to control, highly cost-effective, and can be used for filiform or filmy samples.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work is financially supported by the National Natural Science Foundation of China (11972084) and the National Science and Technology Major Project (2017-VI-0003-0073).
References
Bhujangrao, T., C. Froustey, E. Iriondo, F. Veiga, and F. Mata. 2020. “Review of intermediate strain rate testing devices.” Metals 10 (7): 894. https://doi.org/10.3390/met10070894.
Cai, S., D. Wu, J. Zhou, C. Zhang, Z. Liu, and S. Liu. 2021. “Improvement and application of miniature Hopkinson bar device based on series-parallel coil array electromagnetic launch.” Measurement 186 (Dec): 110203. https://doi.org/10.1016/j.measurement.2021.110203.
Chen, X., Z. Liu, G. He, and H. Xie. 2014. “A novel integrated tension-compression design for a mini split Hopkinson bar apparatus.” Rev. Sci. Instrum. 85 (3): 035114. https://doi.org/10.1063/1.4868593.
Cloete, T. J., G. Paul, and E. B. Ismail. 2013. “Hopkinson bar techniques for the intermediate strain rate testing of bovine cortical bone.” Philos. Trans. R. Soc. London, Ser. A 372 (2015): 20130210. https://doi.org/10.1098/rsta.2013.0210.
Cloete, T. J., and M. Stander. 2012. “Refinement of the wedge bar technique for compression tests at intermediate strain rates.” EPJ Web Conf. 26 (Aug): 01025. https://doi.org/10.1051/epjconf/20122601025.
Gilat, A., J. D. Seidt, T. A. Matrka, and K. A. Gardner. 2019. “A new device for tensile and compressive testing at intermediate strain rates.” Exp. Mech. 59 (5): 725–731. https://doi.org/10.1007/s11340-019-00488-1.
Jakkula, P. 2019. “Direct tension bar for testing at intermediate strain rate.” Master’s thesis, Dept. of Sustainable Systems Engineering, Univ. of Freiburg.
Joo, G., H. Huh, and M. K. Choi. 2016. “Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates.” Int. J. Mech. Sci. 108 (Apr): 174–187. https://doi.org/10.1016/j.ijmecsci.2016.01.035.
Lim, J., W. Chen, and J. Zheng. 2010a. “Dynamic small strain measurements of Kevlar 129 single fibers with a miniaturized tension Kolsky bar.” Polym. Test. 29 (6): 701–705. https://doi.org/10.1016/j.polymertesting.2010.05.012.
Lim, J., J. Zheng, K. Masters, and W. Chen. 2010b. “Effects of gage length, loading rates, and damage on the strength of PPTA fibers.” Int. J. Impact Eng. 38 (4): 219–227. https://doi.org/10.1016/j.ijimpeng.2010.11.009.
Liu, Z., X. Chen, X. Lv, and H. Xie. 2013. “A mini desktop impact test system using multistage electromagnetic launch.” Measurement 49 (Mar): 68–76. https://doi.org/10.1016/j.measurement.2013.11.029.
Lundberg, B., and A. Henchoz. 1977. “Analysis of elastic waves from two-point strain measurement.” Exp. Mech. 17 (6): 213–218. https://doi.org/10.1007/BF02324491.
Othman, R., P. Guegan, G. Challita, F. Pasco, and D. Lebreton. 2008. “A modified servo-hydraulic machine for testing at intermediate strain rates.” Int. J. Impact Eng. 36 (3): 460–467. https://doi.org/10.1016/j.ijimpeng.2008.06.003.
Ou, Y., D. Zhu, M. Huang, and H. Li. 2016. “The effects of gage length and strain rate on tensile behavior of Kevlar 29 single filament and yarn.” J. Compos. Mater. 51 (1): 109–123. https://doi.org/10.1177/0021998316639121.
Perogamvros, N., T. Mitropoulos, and G. Lampeas. 2016. “Drop tower adaptation for medium strain rate tensile testing.” Exp. Mech. 56 (3): 419–436. https://doi.org/10.1007/s11340-015-0112-3.
Petiteau, J. C., R. Othman, P. Guégan, H. L. Sourne, and E. Verron. 2014. “A drop-bar setup for the compressive testing of rubber-like materials in the intermediate strain rate range.” Strain 50 (6): 555–562. https://doi.org/10.1111/str.12113.
Prot, M., T. J. Cloete, D. Saletti, and S. Laporte. 2014. “Intermediate strain rate behaviour of cancellous bone: From the lower to the higher strain rate.” Supplement, Comput. Methods Biomech. Biomed. Eng. 17 (S1): 50–51. https://doi.org/10.1080/10255842.2014.931106.
Shim, J., and D. Mohr. 2008. “Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates.” Int. J. Impact Eng. 36 (9): 1116–1127. https://doi.org/10.1016/j.ijimpeng.2008.12.010.
Song, B., W. Chen, and W. Lu. 2007. “Mechanical characterization at intermediate strain rates for rate effects on an epoxy syntactic foam.” Int. J. Mech. Sci. 49 (12): 1336–1343. https://doi.org/10.1016/j.ijmecsci.2007.04.003.
Song, B., B. Sanborn, J. Heister, R. Everett, T. Martinez, G. Groves, E. Johnson, D. Kenney, M. Knight, and M. Spletzer. 2018. “Development of ‘Dropkinson’ bar for intermediate strain-rate testing.” EPJ Web Conf. 183 (Sep): 02004. https://doi.org/10.1007/978-3-319-95089-1_12.
Song, B., C. J. Syn, C. L. Grupido, W. Chen, and W. Lu. 2008. “A long split Hopkinson pressure bar (LSHPB) for intermediate-rate characterization of soft materials.” Exp. Mech. 48 (6): 809–815. https://doi.org/10.1007/s11340-007-9095-z.
Whittington, W. R., A. L. Oppedal, D. K. Francis, and M. F. Horstemeyer. 2015. “A novel intermediate strain rate testing device: The serpentine transmitted bar.” Int. J. Impact Eng. 81 (Jul): 1–7. https://doi.org/10.1016/j.ijimpeng.2015.02.009.
Yoo, S., G. Catalanotti, N. Toso, Y. Toso, and H. Voggenreiter. 2019. “Improvement on dynamic material characterization of carbon/epoxy composites at intermediate strain rates.” In Proc., ICCM22 Int. Conf. on Composite Materials, 3914–3922. Melbourne, VIC, Australia: Engineers Australia.
Zhao, H., and G. A. Gary. 1997. “A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement.” J. Mech. Phys. Solids 45 (7): 1185–1202. https://doi.org/10.1016/S0022-5096(96)00117-2.
Zhou, J., U. Heisserer, P. W. Duke, P. T. Curtis, J. Morton, and V. L. Tagarielliet. 2021. “The sensitivity of the tensile properties of PMMA, Kevlar and Dyneema to temperature and strain rate.” Polymer 225 (14): 123781. https://doi.org/10.1016/j.polymer.2021.123781.
Zhu, D., B. Mobasher, and S. D. Rajan. 2011a. “Dynamic tensile testing of Kevlar 49 fabrics.” J. Mater. Civ. Eng. 23 (3): 230–239. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000156.
Zhu, D., B. Mobasher, S. D. Rajan, and P. Peralta. 2011b. “Characterization of dynamic tensile testing using aluminum alloy 6061-T6 at intermediate strain rates.” J. Eng. Mech. 137 (10): 669–679. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000264.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jan 15, 2023
Accepted: Jul 12, 2023
Published online: Sep 8, 2023
Published in print: Nov 1, 2023
Discussion open until: Feb 8, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.