Defining Information Requirements for Off-Site Construction Management: An Industry Case Study from Canada
Publication: Journal of Construction Engineering and Management
Volume 150, Issue 12
Abstract
Off-site construction projects have demonstrated the potential to drive transformation in the construction sector to achieve better outcomes in terms of high precision and efficiency of deliveries through the collaborative design and fabrication processes, long-term stakeholder engagement and relations across projects, product standardization, risk-sharing strategies, and investment in a strong integrated supply chain. However, repeating the successful off-site construction projects to scale the benefits can be challenging considering that construction projects vary across regions and contexts. The streamlined processes and a consistent collection of information requirements should be leveraged to alleviate the challenge and help stakeholders effectively adopt the off-site construction approach. To achieve this goal, this study defines the information requirements across multiple stages of the off-site construction supply chain, using the case study approach to delineate the information requirements for an off-site construction company located in Edmonton, Alberta, Canada. The evaluation and interpretation of the case study underscore the need for consistent collection, storage and utilization of logistics, construction, and postconstruction activities information to tie back to sales and design activities. To facilitate the activities integration, an information requirement framework is proposed for off-site construction processes based on the learnings collected from the case study and a digital twin technology platform. Although the reuse and interoperability of information among various systems remains a long-standing issue to prevent the wide adoption of off-site construction, the findings and the proposed information requirement framework can be an integral part of the potential guidelines for successful implementation of off-site construction.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Part of the case study interpretation reported in this study was supported by the “Kit-of-Parts Platform System (KOPPS) to Provide Affordable, Sustainable and Resilient Housing in Canada” research project from the Canada Mortgage Housing Corporation Housing Supply Challenge Round 4—Building for the Future (Fund No. PO006788-1). We also acknowledge the funding support from the Natural Sciences and Engineering Research Council of Canada (NSERC) Discovery Grant (Grant No. RGPIN-2020-04126).
References
Ahn, S., S. Han, and M. Al-Hussein. 2019. “2D drawing visualization framework for applying projection-based augmented reality in a panelized construction manufacturing facility: Proof of concept.” J. Comput. Civ. Eng. 33 (5): 04019032. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000843.
Almashaqbeh, M., and K. El-Rayes. 2022. “Multiobjective model for optimizing the planning of floor plans, finishing level, and transportation in modular construction.” J. Archit. Eng. 28 (4): 04022029. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000563.
Alsakka, F., I. El-Chami, H. Yu, and M. Al-Hussein. 2023. “Computer vision-based process time data acquisition for offsite construction.” Autom. Constr. 149 (May): 104803. https://doi.org/10.1016/j.autcon.2023.104803.
An, S., P. Martinez, M. Al-Hussein, and R. Ahmad. 2020. “BIM-based decision support system for automated manufacturability check of wood frame assemblies.” Autom. Constr. 111 (Mar): 103065. https://doi.org/10.1016/j.autcon.2019.103065.
Bakhshi, S., M. R. Chenaghlou, F. Pour Rahimian, D. J. Edwards, and N. Dawood. 2022. “Integrated BIM and DfMA parametric and algorithmic design based collaboration for supporting client engagement within offsite construction.” Autom. Constr. 133 (Jan): 104015. https://doi.org/10.1016/j.autcon.2021.104015.
Barkokebas, B., M. Al-Hussein, and F. Hamzeh. 2022. “Assessment of digital twins to reassign multiskilled workers in offsite construction based on lean thinking.” J. Constr. Eng. Manage. 149 (1): 04022143. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002420.
Bhilare, S., D. Khatri, S. Rangnekar, and Q. Chen. 2023. “Using BIM to facilitate generative target value design for energy efficient buildings.” In Vol. 40 of Proc., Int. Symp. on Automation and Robotics in Construction (ISARC), 667–674. London: International Association for Automation and Robotics in Construction.
Bicocchi, N., G. Cabri, F. Mandreoli, and M. Mecella. 2019. “Dynamic digital factories for agile supply chains: An architectural approach.” J. Ind. Inf. Integr. 15 (Sep): 111–121. https://doi.org/10.1016/j.jii.2019.02.001.
Bondar, S., J. C. Hsu, A. Pfouga, and J. Stjepandić. 2017. “Agile digital transformation of system-of-systems architecture models using Zachman framework.” J. Ind. Inf. Integr. 7 (Sep): 33–43. https://doi.org/10.1016/j.jii.2017.03.001.
Chen, Q., B. T. Adey, C. Haas, and D. M. Hall. 2020. “Using look-ahead plans to improve material flow processes on construction projects when using BIM and RFID technologies.” Constr. Innovation 20 (3): 471–508. https://doi.org/10.1108/CI-11-2019-0133.
Chen, Q., B. T. Adey, C. T. Haas, and D. M. Hall. 2022. “Exploiting digitalization for the coordination of required changes to improve engineer-to-order materials flow management.” Constr. Innovation 22 (1): 76–100. https://doi.org/10.1108/CI-03-2020-0039.
Chen, Q., B. Garcia de Soto, and B. T. Adey. 2021. “Supplier-contractor coordination approach to managing demand fluctuations of ready-mix concrete.” Autom. Constr. 121 (Jan): 103423. https://doi.org/10.1016/j.autcon.2020.103423.
Chou, J. S., and J. T. O’Connor. 2007. “Internet-based preliminary highway construction cost estimating database.” Autom. Constr. 17 (1): 65–74. https://doi.org/10.1016/j.autcon.2007.03.001.
Crowe, S., K. Cresswell, A. Robertson, G. Huby, A. Avery, and A. Sheikh. 2011. “The case study approach.” BMC Med. Res. Methodol. 11 (Jun): 100. https://doi.org/10.1186/1471-2288-11-100.
Dias Barkokebas, R., M. Al-Hussein, and X. Li. 2022. “VR–MOCAP-enabled ergonomic risk assessment of workstation prototypes in offsite construction.” J. Constr. Eng. Manage. 148 (8): 04022064. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002319.
Esfahani, M. E., C. Rausch, M. M. Sharif, Q. Chen, C. Haas, and B. T. Adey. 2021. “Quantitative investigation on the accuracy and precision of scan-to-BIM under different modelling scenarios.” Autom. Constr. 126 (Jun): 103686. https://doi.org/10.1016/j.autcon.2021.103686.
Formentini, G., F. Bouissiere, C. Cuiller, P. E. Dereux, and C. Favi. 2022. “Conceptual design for assembly methodology formalization: Systems installation analysis and manufacturing information integration in the design and development of aircraft architectures.” J. Ind. Inf. Integr. 26 (Mar): 100327. https://doi.org/10.1016/j.jii.2022.100327.
Gan, V. J. L. 2022. “BIM-based building geometric modeling and automatic generative design for sustainable offsite construction.” J. Constr. Eng. Manage. 148 (10): 04022111. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002369.
Gbadamosi, A.-Q., L. Oyedele, A.-M. Mahamadu, H. Kusimo, M. Bilal, J. M. Davila Delgado, and N. Muhammed-Yakubu. 2020. “Big data for design options repository: Towards a DFMA approach for offsite construction.” Autom. Constr. 120 (Dec): 103388. https://doi.org/10.1016/j.autcon.2020.103388.
Goh, M., and Y. M. Goh. 2019. “Lean production theory-based simulation of modular construction processes.” Autom. Constr. 101 (May): 227–244. https://doi.org/10.1016/j.autcon.2018.12.017.
Goul, M., and K. Corral. 2007. “Enterprise model management and next generation decision support.” Decis. Support Syst. 43 (3): 915–932. https://doi.org/10.1016/j.dss.2005.05.023.
Goulding, J., W. Nadim, P. Petridis, and M. Alshawi. 2012. “Construction industry offsite production: A virtual reality interactive training environment prototype.” Adv. Eng. Inf. 26 (1): 103–116. https://doi.org/10.1016/j.aei.2011.09.004.
Gu, J., L. Zhao, X. Yue, N. I. Arshad, and U. H. Mohamad. 2023. “Multistage quality control in manufacturing process using blockchain with machine learning technique.” Inf. Process. Manage. 60 (4): 103341. https://doi.org/10.1016/j.ipm.2023.103341.
Gürdür Broo, D., M. Bravo-Haro, and J. Schooling. 2022. “Design and implementation of a smart infrastructure digital twin.” Autom. Constr. 136 (Apr): 104171. https://doi.org/10.1016/j.autcon.2022.104171.
Ho, C., Y. W. Kim, and Z. B. Zabinsky. 2022. “Prefabrication supply chains with multiple shops: Optimization for job allocation.” Autom. Constr. 136 (Apr): 104155. https://doi.org/10.1016/j.autcon.2022.104155.
Jang, J. Y., S. Ahn, and T. W. Kim. 2023. “Cloud-based information system for automated precast concrete transportation planning.” Autom. Constr. 152 (Aug): 104942. https://doi.org/10.1016/j.autcon.2023.104942.
Jiang, Y., X. Liu, Z. Wang, M. Li, R. Y. Zhong, and G. Q. Huang. 2023. “Blockchain-enabled digital twin collaboration platform for fit-out operations in modular integrated construction.” Autom. Constr. 148 (Apr): 104747. https://doi.org/10.1016/j.autcon.2023.104747.
Karmarkar, U. S., and U. M. Apte. 2007. “Operations management in the information economy: Information products, processes, and chains.” J. Oper. Manage. 25 (2): 438–453. https://doi.org/10.1016/j.jom.2006.11.001.
Kedir, F., Q. Chen, D. M. Hall, B. T. Adey, and R. Boyd. 2022. “Formative scenario analysis of the factors influencing the adoption of industrialised construction in countries with high housing demand—The cases of Ethiopia, Kenya, and South Africa.” Construct. Manage. Econ. 40 (9): 690–710. https://doi.org/10.1080/01446193.2022.2098508.
Lee, G. H., J. I. Kim, C. Koo, and T. W. Kim. 2022. “Automated generation of precast concrete slab stacks for transportation in offsite construction projects.” J. Constr. Eng. Manage. 148 (8): 04022072. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002333.
Lei, Z., M. Sadiq Altaf, Z. Cheng, H. Liu, and S. Tang. 2023. “Measurement of information loss and transfer impacts of technology systems in offsite construction processes.” J. Constr. Eng. Manage. 149 (9): 05023011. https://doi.org/10.1061/JCEMD4.COENG-13637.
Lei, Z., H. Taghaddos, U. Hermann, and M. Al-Hussein. 2013a. “A methodology for mobile crane lift path checking in heavy industrial projects.” Autom. Constr. 31 (May): 41–53. https://doi.org/10.1016/j.autcon.2012.11.042.
Lei, Z., H. Taghaddos, J. Olearczyk, M. Al-Hussein, and U. Hermann. 2013b. “Automated method for checking crane paths for heavy lifts in industrial projects.” J. Constr. Eng. Manage. 139 (10): 04013011. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000740.
Li, X., G. Q. Shen, P. Wu, H. Fan, H. Wu, and Y. Teng. 2018. “RBL-PHP: Simulation of lean construction and information technologies for prefabrication housing production.” J. Manage. Eng. 34 (2): 04017053. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000577.
Li, X., G. Q. Shen, P. Wu, and T. Yue. 2019. “Integrating building information modeling and prefabrication housing production.” Autom. Constr. 100 (Apr): 46–60. https://doi.org/10.1016/j.autcon.2018.12.024.
Liu, Q., G. Feng, X. Zhao, and W. Wang. 2020. “Minimizing the data quality problem of information systems: A process-based method.” Decis. Support Syst. 137 (Oct): 113381. https://doi.org/10.1016/j.dss.2020.113381.
Lu, Y., and Y. Zhu. 2021. “Integrating hoisting efficiency into construction site layout plan model for prefabricated construction.” J. Constr. Eng. Manage. 147 (10): 04021130. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002158.
Martinez, P., B. Barkokebas, F. Hamzeh, M. Al-Hussein, and R. Ahmad. 2021. “A vision-based approach for automatic progress tracking of floor paneling in offsite construction facilities.” Autom. Constr. 125 (May): 103620. https://doi.org/10.1016/j.autcon.2021.103620.
Ng, M. S., Q. Chen, D. M. Hall, J. Hackl, and B. T. Adey. 2022. “Designing for digital fabrication: An empirical study of industry needs, perceived benefits, and strategies for adoption.” J. Manage. Eng. 38 (5): 04022052. https://doi.org/10.1061/(ASCE)ME.1943-5479.0001072.
Okike, C., and K. J. Fernandes. 2012. “Impact of information use architecture on load and usability.” Inf. Process. Manage. 48 (5): 995–1016. https://doi.org/10.1016/j.ipm.2012.04.003.
Park, J., H. Cai, P. S. Dunston, and H. Ghasemkhani. 2017. “Database-supported and web-based visualization for daily 4D BIM.” J. Constr. Eng. Manage. 143 (10): 04017078. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001392.
Pérez-Castillo, R., F. Ruiz, and M. Piattini. 2020. “A decision-making support system for enterprise architecture modelling.” Decis. Support Syst. 131 (Apr): 113249. https://doi.org/10.1016/j.dss.2020.113249.
Pour Rahimian, F., V. Chavdarova, S. Oliver, and F. Chamo. 2019. “OpenBIM-Tango integrated virtual showroom for offsite manufactured production of self-build housing.” Autom. Constr. 102 (Jun): 1–16. https://doi.org/10.1016/j.autcon.2019.02.009.
Rausch, C., R. Lu, S. Talebi, and C. Haas. 2021. “Deploying 3D scanning based geometric digital twins during fabrication and assembly in offsite manufacturing.” Int. J. Construct. Manage. 23 (3): 565–578. https://doi.org/10.1080/15623599.2021.1896942.
Rausch, C., M. Nahangi, C. Haas, and W. Liang. 2019. “Monte Carlo simulation for tolerance analysis in prefabrication and offsite construction.” Autom. Constr. 103 (Jul): 300–314. https://doi.org/10.1016/j.autcon.2019.03.026.
Shen, K., X. Li, X. Cao, and Z. Zhang. 2022. “Prefabricated construction process optimization based on rework risk.” J. Constr. Eng. Manage. 148 (6): 04022031. https://doi.org/10.1061/(asce)co.1943-7862.0002277.
Solihin, W., C. Eastman, and Y. C. Lee. 2017. “Multiple representation approach to achieve high-performance spatial queries of 3D BIM data using a relational database.” Autom. Constr. 81 (Sep): 369–388. https://doi.org/10.1016/j.autcon.2017.03.014.
Taghaddos, H., U. Hermann, S. AbouRizk, and Y. Mohamed. 2014. “Simulation-based multiagent approach for scheduling modular construction.” J. Comput. Civ. Eng. 28 (2): 263–274. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000262.
Timmerman, Y., and A. Bronselaer. 2019. “Measuring data quality in information systems research.” Decis. Support Syst. 126 (Nov): 113138. https://doi.org/10.1016/j.dss.2019.113138.
Uysal, M. P., and A. E. Mergen. 2021. “Smart manufacturing in intelligent digital mesh: Integration of enterprise architecture and software product line engineering.” J. Ind. Inf. Integr. 22 (Jun): 100202. https://doi.org/10.1016/j.jii.2021.100202.
Wang, Z., H. Hu, and J. Gong. 2018. “Framework for modeling operational uncertainty to optimize offsite production scheduling of precast components.” Autom. Constr. 86 (Feb): 69–80. https://doi.org/10.1016/j.autcon.2017.10.026.
WEINMANN Machines. 2022. “WEINMANN–Solutions for timber construction.” Accessed January 20, 2024. https://www.homag.com/en/weinmann.
Wei, Y., H. Choi, and Z. Lei. 2022. “A generative design approach for modular construction in congested urban areas.” Smart Sustainable Built Environ. 11 (4): 1163–1181. https://doi.org/10.1108/SASBE-04-2021-0068.
Wong Chong, O., and J. Zhang. 2021. “Logic representation and reasoning for automated BIM analysis to support automation in offsite construction.” Autom. Constr. 129 (Sep): 103756. https://doi.org/10.1016/j.autcon.2021.103756.
Wong Chong, O., J. Zhang, R. M. Voyles, and B. C. Min. 2022. “BIM-based simulation of construction robotics in the assembly process of wood frames.” Autom. Constr. 137 (May): 104194. https://doi.org/10.1016/j.autcon.2022.104194.
Wood, L. M., B. Sebar, and N. Vecchio. 2020. “Application of rigour and credibility in qualitative document analysis: Lessons learnt from a case study.” Qual. Rep. 25 (2): 456–470. https://doi.org/10.46743/2160-3715/2020.4240.
Wu, B., B. Gao, W. Xu, H. Wang, Y. Yi, and R. Premalatha. 2022. “Sustainable food smart manufacturing technology.” Inf. Process. Manage. 59 (1): 102754. https://doi.org/10.1016/j.ipm.2021.102754.
Xie, H., M. M. Chowdhury, R. R. A. Issa, and W. Shi. 2018. “Simulation of dynamic energy consumption in modular construction manufacturing processes.” J. Archit. Eng. 24 (1): 04017034. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000289.
Xu, Z., R. Kang, and R. Lu. 2020. “3D reconstruction and measurement of surface defects in prefabricated elements using point clouds.” J. Comput. Civ. Eng. 34 (5): 04020033. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000920.
Yan, X., and H. Zhang. 2021. “Computer vision–based disruption management for prefabricated building construction schedule.” J. Comput. Civ. Eng. 35 (6): 04021027. https://doi.org/10.1061/(asce)cp.1943-5487.0000990.
Yang, Y., M. Pan, and W. Pan. 2022. “Integrated offsite logistics scheduling approach for high-rise modular building projects.” J. Constr. Eng. Manage. 148 (6): 04022032. https://doi.org/10.1061/(asce)co.1943-7862.0002280.
Yang, Z., and W. Lu. 2023. “Facility layout design for modular construction manufacturing: A comparison based on simulation and optimization.” Autom. Constr. 147 (Mar): 104713. https://doi.org/10.1016/j.autcon.2022.104713.
Young, J. C., et al. 2018. “A methodological guide to using and reporting on interviews in conservation science research.” Methods Ecol. Evol. 9 (1): 10–19. https://doi.org/10.1111/2041-210X.12828.
Zhai, Y., K. Chen, J. X. Zhou, J. Cao, Z. Lyu, X. Jin, G. Q. P. Shen, W. Lu, and G. Q. Huang. 2019. “An internet of things-enabled BIM platform for modular integrated construction: A case study in Hong Kong.” Adv. Eng. Inf. 42 (Oct): 100997. https://doi.org/10.1016/j.aei.2019.100997.
Zhang, Y., Z. Lei, S. Han, A. Bouferguene, and M. Al-Hussein. 2020. “Process-oriented framework to improve modular and offsite construction manufacturing performance.” J. Constr. Eng. Manage. 146 (9): 04020116. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001909.
Zhou, J. X., G. Q. Shen, S. H. Yoon, and X. Jin. 2021. “Customization of on-site assembly services by integrating the internet of things and BIM technologies in modular integrated construction.” Autom. Constr. 126 (Jun): 103663. https://doi.org/10.1016/j.autcon.2021.103663.
Zhou, Z., Q. Li, and W. Wu. 2012. “Developing a versatile subway construction incident database for safety management.” J. Constr. Eng. Manage. 138 (10): 1169–1180. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000518.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 150 • Issue 12 • December 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Feb 6, 2024
Accepted: Jun 21, 2024
Published online: Sep 20, 2024
Published in print: Dec 1, 2024
Discussion open until: Feb 20, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.