Optimizing Construction Work–Rest Schedules and Worker Reassignment Utilizing Wristband Physiological Data
Publication: Journal of Construction Engineering and Management
Volume 150, Issue 11
Abstract
Construction workers are exposed to long physically demanding work hours and require sufficient work rests to avoid strenuous fatigue, productivity loss, and adverse health effects. In the literature, limited efforts incorporated standardized work–rest periods in the construction schedule without accounting for the variation among the workers’ live physiological conditions. Rather than focusing on the worker’s fatigue data collection, this paper utilizes sample cardiovascular stress and energy exertion data from health-related studies, collected using wearable Fitbits. The paper then proposes a framework for the analysis and utilization of this physiological data to design optimum work–rest schedules and worker reassignment plans as two strategies to mitigate workers’ fatigue. The framework uses a constraint programming schedule optimization model that minimizes workers’ physiological strain through optimized work rests and worker reassignments. Using a hypothetical schedule with the workers’ fatigue data, the model proposed two 20-min breaks for one worker and two 5-min breaks for other workers and reassigned eight workers to different tasks. The framework helps project managers to efficiently improve the health and safety of workers and improve productivity, leading to a more inclusive work environment.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Abdous, M.-A., X. Delorme, D. Battini, F. Sgarbossa, and S. Berger-Douce. 2022. “Assembly line balancing problem with ergonomics: A new fatigue and recovery model.” Int. J. Prod. Res. 61 (3): 693–706. https://doi.org/10.1080/00207543.2021.2015081.
Abuwarda, Z., K. Mostafa, A. Oetomo, H. Hegazy, and P. Morita. 2022. “Wearable devices: Cross benefits from healthcare to construction.” Autom. Constr. 142 (Oct): 104501. https://doi.org/10.1016/j.autcon.2022.104501.
Antwi-Afari, M. F., H. Li, D. J. Edwards, E. A. Pärn, J. Seo, and A. Y. L. Wong. 2017. “Biomechanical analysis of risk factors for work-related musculoskeletal disorders during repetitive lifting task in construction workers.” Autom. Constr. 83 (Nov): 41–47. https://doi.org/10.1016/j.autcon.2017.07.007.
Aryal, A., A. Ghahramani, and B. Becerik-Gerber. 2017. “Monitoring fatigue in construction workers using physiological measurements.” Autom. Constr. 82 (Oct): 154–165. https://doi.org/10.1016/j.autcon.2017.03.003.
Battini, D., X. Delorme, A. Dolgui, A. Persona, and F. Sgarbossa. 2015. “Ergonomics in assembly line balancing based on energy expenditure: A multi-objective model.” Int. J. Prod. Res. 54 (3): 824–845. https://doi.org/10.1080/00207543.2015.1074299.
Bouchard, D., and F. Trudeau. 2008. “Estimation of energy expenditure in a work environment: Comparison of accelerometry and oxygen consumption/heart rate regression.” Ergonomics 51 (5): 663–670. https://doi.org/10.1080/00140130701780484.
Bureau of Labor Statistics. 2020. “Census of occupational fatal injuries summary.” Accessed November 30, 2023. https://www.bls.gov/news.release/cfoi.nr0.htm.
Castaneda, D., A. Esparza, M. Ghamari, C. Soltanpur, and H. Nazeran. 2018. “A review on wearable photoplethysmography sensors and their potential future applications in health care.” Int. J. Biosens Bioelectron. 4 (4): 195–202. https://doi.org/10.15406/ijbsbe.2018.04.00125.
Chan, A. P. C., W. Yi, D. P. Wong, M. C. H. Yam, and D. W. M. Chan. 2012. “Determining an optimal recovery time for construction rebar workers after working to exhaustion in a hot and humid environment.” Build. Environ. 58 (Dec): 163–171. https://doi.org/10.1016/j.buildenv.2012.07.006.
Collins, M. A., K. J. Cureton, D. W. Hill, and C. A. Ray. 1991. “Relationship of heart rate to oxygen uptake during weight lifting exercise.” Med. Sci. Sports Exerc. 23 (5): 636–640.
Costin, A., A. Wehle, and A. Adibfar. 2019. “Leading indicators—A conceptual IoT-based framework to produce active leading indicators for construction safety.” Safety 5 (4): 86. https://doi.org/10.3390/safety5040086.
Crawford, J. O., and A. Davis. 2020. “Work-related musculoskeletal disorders: Why are they still so prevalent? Evidence from a literature review: European risk observatory report.” Accessed November 24, 2022. https://osha.europa.eu/de/publications/work-related-musculoskeletal-disorders-why-are-they-still-so-prevalent-evidence.
Dawson, D., A. K. Searle, and J. L. Paterson. 2014. “Look before you(s)leep: Evaluating the use of fatigue detection technologies within a fatigue risk management system for the road transport industry.” Sleep Med. Rev. 18 (2): 141–152. https://doi.org/10.1016/j.smrv.2013.03.003.
Di Pasquale, V., F. Fruggiero, R. Iannone, and S. Miranda. 2017. “A model for break scheduling assessment in manufacturing systems.” Comput. Ind. Eng. 111 (Sep): 563–580. https://doi.org/10.1016/j.cie.2017.05.017.
Evenson, K. R., M. M. Goto, and R. D. Furberg. 2015. “Systematic review of the validity and reliability of consumer-wearable activity trackers.” Int. J. Behav. Nutr. Phys. Act 12 (Dec): 159. https://doi.org/10.1186/s12966-015-0314-1.
Feehan, L. M., J. Geldman, E. C. Sayre, C. Park, A. M. Ezzat, J. Y. Yoo, C. B. Hamilton, and L. C. Li. 2018. “Accuracy of Fitbit devices: Systematic review and narrative syntheses of quantitative data.” JMIR mHealth uHealth 6 (8): e10527. https://doi.org/10.2196/10527.
Finco, S., D. Battini, X. Delorme, A. Persona, and F. Sgarbossa. 2018. “Heuristic methods to consider rest allowance into assembly balancing problem.” IFAC-PapersOnLine 51 (11): 669–674. https://doi.org/10.1016/j.ifacol.2018.08.395.
Finco, S., D. Battini, X. Delorme, A. Persona, and F. Sgarbossa. 2020. “Workers’ rest allowance and smoothing of the workload in assembly lines.” Int. J. Prod. Res. 58 (4): 1255–1270. https://doi.org/10.1080/00207543.2019.1616847.
Finco, S., I. Zennaro, D. Battini, and A. Persona. 2019. “Workers’ availability definition through the energy expenditure evaluation.” In Proc., 25th ISSAT Int. Conf. on Reliability and Quality in Design, 29–33. Metuchen, NJ: International Society of Science and Applied Technologies.
Forstag, E. H., and P. A. Cuff. 2018. “A design thinking, systems approach to well-being within education and practice: Proceedings of a workshop.” Accessed November 24, 2022. https://www.ncbi.nlm.nih.gov/books/NBK540859/.
Garg, A., D. B. Chaffin, and G. D. Herrin. 1978. “Prediction of metabolic rates for manual materials handling jobs.” Am. Ind. Hyg. Assoc. J. 39 (8): 661–674. https://doi.org/10.1080/0002889778507831.
Gatti, U. C., G. C. Migliaccio, S. M. Bogus, and S. Schneider. 2014. “An exploratory study of the relationship between construction workforce physical strain and task level productivity.” Construct. Manage. Econ. 32 (6): 548–564. https://doi.org/10.1080/01446193.2013.831463.
Gorman, M. F., and J. J. Kanet. 2010. “Formulation and solution approaches to the rail maintenance production gang scheduling problem.” J. Transp. Eng. 136 (8): 701–708. https://doi.org/10.1061/(ASCE)0733-947X(2010)136:8(701).
Guo, H., Y. Yu, T. Xiang, H. Li, and D. Zhang. 2017. “The availability of wearable-device-based physical data for the measurement of construction workers’ psychological status on site: From the perspective of safety management.” Autom. Constr. 82 (Oct): 207–217. https://doi.org/10.1016/j.autcon.2017.06.001.
Hills, A. P., N. Mokhtar, and N. M. Byrne. 2014. “Assessment of physical activity and energy expenditure: An overview of objective measures.” Front. Nutr. 1 (Jun): 5. https://doi.org/10.3389/fnut.2014.00005.
Ho, C., C. Chang, K. Lin, C. Huang, and Y. Hsu. 2019. “Correction of estimation bias of predictive equations of energy expenditure based on wrist/waist-mounted accelerometers.” PeerJ 7 (Nov): e7973. https://doi.org/10.7717/peerj.7973.
Hsie, M., W.-T. Hsiao, T.-M. Cheng, and H.-C. Chen. 2009. “A model used in creating a work-rest schedule for laborers.” Autom. Constr. 18 (6): 762–769. https://doi.org/10.1016/j.autcon.2009.02.010.
Hwang, S., and S. H. Lee. 2017. “Wristband-type wearable health devices to measure construction workers’ physical demands.” Autom. Constr. 83 (Nov): 330–340. https://doi.org/10.1016/j.autcon.2017.06.003.
Hwang, S., J. Seo, J. Ryu, and S. Lee. 2019. “Challenges and opportunities of understanding construction workers’ physical demands through field energy expenditure measurements using a wearable activity tracker.” In Proc., 25th ISSAT Int. Conf. on Reliability and Quality in Design, 29–33. Metuchen, NJ: International Society of Science and Applied Technologies.
ILO (International Labour Organization). 2017. Conducting labour inspections on construction a guide for labour inspectors. Geneva: ILO.
Isusi, I. 2020. “Work-related musculoskeletal disorders—Facts and figures: Synthesis report.” Accessed November 24, 2022. https://osha.europa.eu/en/publications/work-related-musculoskeletal-disorders-facts-and-figures-synthesis-report-10-eu-member.
Kamišali, A., I. M. FisterTurkanovi Jr., M. Turkanovi, and S. Karakatič. 2018. “Sensors and functionalities of non-invasive wrist-wearable devices: A review.” Sensors 18 (6): 1714. https://doi.org/10.3390/s18061714.
Khitrov, M. Y., S. Laxminarayan, D. Thorsley, S. Ramakrishnan, S. Rajaraman, N. J. Wesensten, and J. Reifman. 2014. “PC-PVT: A platform for psychomotor vigilance task testing, analysis, and prediction.” Behav. Res. Methods 46 (Mar): 140–147. https://doi.org/10.3758/s13428-013-0339-9.
Li, K., S. Xu, and H. Fu. 2020. “Work-break scheduling with real-time fatigue effect and recovery.” Int. J. Prod. Res. 58 (3): 689–702. https://doi.org/10.1080/00207543.2019.1598600.
Loehrke, K. 2018. “Tracking the legal risks of wearable devices | Insight Publications.” Accessed November 30, 2023. https://Insightonbusiness.Com/.
Naderi, B., R. Ruiz, and V. Roshanaei. 2023. “Mixed-integer programming vs. constraint programming for shop scheduling problems: New results and outlook.” INFORMS J. Comput. 35 (4): 817–843. https://doi.org/10.1287/ijoc.2023.1287.
Ning, X. 2011. “Development of a new work-rest scheduling model based on inventory control theory.” Accessed November 30, 2023. https://search.proquest.com/docview/894451893?accountid=13250.
Ning, X., K. Lam, and M. C. Lam. 2010. “Automation in construction dynamic construction site layout planning using max-min ant system.” Autom. Constr. 19 (1): 55–65. https://doi.org/10.1016/j.autcon.2009.09.002.
Nur, N. M., S. Z. M. Dawal, M. Dahari, and J. Sanusi. 2015. “The effects of energy expenditure rate on work productivity performance at different levels of production standard time.” J. Phys. Ther. Sci. 27 (8): 2431–2433. https://doi.org/10.1589/jpts.27.2431.
Öztürkoǧlu, Y. Y., and R. L. Bulfin. 2012. “Scheduling jobs to consider physiological factors.” Hum. Factors Ergon. Manuf. Serv. Ind. 22 (2): 113–120. https://doi.org/10.1002/hfm.20257.
Patel, V., A. Chesmore, C. M. Legner, and S. Pandey. 2022. “Trends in workplace wearable technologies and connected-worker solutions for next-generation occupational safety, health, and productivity.” Adv. Intell. Syst. 4 (1): 2100099. https://doi.org/10.1002/aisy.202100099.
Pour, S. M., J. H. Drake, L. S. Ejlertsen, K. M. Rasmussen, and E. K. Burke. 2018. “A hybrid constraint programming/mixed integer programming framework for the preventive signaling maintenance crew scheduling problem.” Eur. J. Oper. Res. 269 (1): 341–352. https://doi.org/10.1016/j.ejor.2017.08.033.
Price, A. D. F. 1990. “Calculating relaxation allowances for construction operatives—Part 2: Local muscle fatigue.” Appl. Ergon. 21 (4): 318–324. https://doi.org/10.1016/0003-6870(90)90203-A.
Rachamadugu, R., and B. Talbot. 1991. “Improving the equality of workload assignments in assembly lines.” Int. J. Prod. Res. 29 (3): 619–633. https://doi.org/10.1080/00207549108930092.
Russey, C. 2018. “How to limit wearables use legal risk | Wearable Technologies.” Accessed November 30, 2023. https://www.wearable-technologies.com/2018/11/how-to-limit-legal-risks-that-come-with-wearable-devices/.
Stefanescu, V. A., and I. E. Radoi. 2019. “Stress level prediction using data from wearables.” In Proc., RoEduNet IEEE Int. Conf. New York: IEEE. https://doi.org/10.1109/ROEDUNET.2019.8909463.
Strath, S. J., D. R. Bassett, A. M. Swartz, and D. L. Thompson. 2001. “Simultaneous heart rate-motion sensor technique to estimate energy expenditure.” Med. Sci. Sports and Exercise 33 (12): 2118–2123. https://doi.org/10.1097/ 00005768-200112000-00022.
Tamura, T., Y. Maeda, M. Sekine, and M. Yoshida. 2014. “Wearable photo plethysmographic sensors past and present.” Electronics 3 (2): 282–302. https://doi.org/10.3390/electronics3020282.
Tao, Y., H. Hu, F. Xu, and Z. Zhang. 2024. “Work–rest schedule optimization of precast production considering workers’ overexertion.” J. Constr. Eng. Manage. 150 (5): 04024033. https://doi.org/10.1061/JCEMD4.COENG-14377.
Techera, U., M. Hallowell, R. Littlejohn, and S. Rajendran. 2018. “Measuring and Predicting Fatigue in Construction: Empirical Field Study.” J. Constr. Eng. Manage. 144 (8): 04018062. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001513.
Torres, Y., S. Nadeau, and K. Landau. 2021. “Evaluation of fatigue and workload among workers conducting complex manual assembly in manufacturing.” IISE Trans. Occup. Ergon. Hum. Factors 9 (1): 49–63. https://doi.org/10.1080/24725838.2021.1997835.
Umer, W., H. Li, G. P. Szeto, and A. Y. Wong. 2017. “Low-cost ergonomic intervention for mitigating physical and subjective discomfort during manual rebar tying.” J. Constr. Eng. Manage. 143 (10): 04017075. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001383.
Vega-Martinez, G., F. J. Ramos-Becerril, D. Mirabent-Amor, J. G. Franco-Sanchez, A. Vera-Hernandez, C. Alvarado-Serrano, and L. Leija-Salas. 2018. “Analysis of heart rate variability and its application in sports medicine: A review.” In Proc., 2018 Global Medical Engineering Physics Exchanges/Pan American Health Care Exchanges (GMEPE/PAHCE). New York: IEEE.
Wang, D., F. Dai, and X. Ning. 2015. “Risk assessment of work-related musculoskeletal disorders in construction: State-of-the-art review.” J. Constr. Eng. Manage. 141 (6): 04015008. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000979.
Wang, J.-S. 2006. “Exercise prescription and thrombogenesis.” J. Biomed. Sci. 13 (6): 753–761. https://doi.org/10.1007/s11373-006-9105-7.
Weiler, D. T., S. O. Villajuan, L. Edkins, S. Cleary, and J. J. Saleem. 2017. “Wearable heart rate monitor technology accuracy in research: A comparative study between PPG and ECG technology.” Proc. Hum. Factors Ergon. Soc. Annu. Meet. 61 (1): 1292–1296. https://doi.org/10.1177/1541931213601804.
Wu, H., W. Hsu, T. Chen, H. Wu, W. Hsu, and T. Chen. 2007. “Complete recovery time after exhaustion in high-intensity work.” Ergonomics 48 (6): 668–679. https://doi.org/10.1080/00140130500070871.
Wu, H. C., and M. J. J. Wang. 2001. “Determining the maximum acceptable work duration for high-intensity work.” Eur. J. Appl. Physiol. 85 (3–4): 339–344. https://doi.org/10.1007/s004210100453.
Wu, H. C., and M. J. J. Wang. 2002. “Relationship between maximum acceptable work time and physical workload.” Ergonomics 45 (4): 280–289. https://doi.org/10.1080/00140130210123499.
Wultsch, G., S. Rinnerhofer, G. Tschakert, and P. Hofmann. 2011. “Governmental regulations for early retirement by means of energy expenditure cut offs.” Scand. J. Work Environ. Health 38 (4): 370–379. https://doi.org/10.5271/sjweh.3195.
Xu, S., and N. G. Hall. 2021. “Fatigue, personnel scheduling and operations: Review and research opportunities.” Eur. J. Oper. Res. 295 (3): 807–822. https://doi.org/10.1016/j.ejor.2021.03.036.
Yi, W., and A. P. C. Chan. 2013. “Optimizing work-rest schedule for construction rebar workers in hot and humid environment.” Build. Environ. 61 (Mar): 104–113. https://doi.org/10.1016/j.buildenv.2012.12.012.
Yi, W., and S. Wang. 2016. “Multi-objective mathematical programming approach to construction laborer assignment with equity consideration.” Comput.-Aided Civ. Infrastruct. Eng. 31 (12): 954–965. https://doi.org/10.1111/mice.12239.
Yi, W., and S. Wang. 2017. “Mixed-integer linear programming on work-rest schedule design for construction sites in hot weather.” Comput.-Aided Civ. Infrastruct. Eng. 32 (5): 429–439. https://doi.org/10.1111/mice.12267.
Yu, Y., H. Li, X. Yang, L. Kong, X. Luoa, and A. Wong. 2019. “An automatic and non-invasive physical fatigue assessment method for construction workers.” Autom. Constr. 103 (Jul): 1–12. https://doi.org/10.1016/j.autcon.2019.02.020.
Zhao, X., N. Liu, S. Zhao, J. Wu, K. Zhang, and R. Zhang. 2019. “Research on the work-rest scheduling in the manual order picking systems to consider human factors.” J. Syst. Sci. Syst. Eng. 28 (3): 344–355. https://doi.org/10.1007/s11518-019-5407-y.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 150 • Issue 11 • November 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Dec 11, 2023
Accepted: May 28, 2024
Published online: Aug 22, 2024
Published in print: Nov 1, 2024
Discussion open until: Jan 22, 2025
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.