A Simulation Model to Analyze Different Automation Scenarios in a Mixed-Assembly Manufacturing Line: Timber-Frame Prefabrication Industry
Publication: Journal of Construction Engineering and Management
Volume 149, Issue 10
Abstract
As prefabrication of timber structures in the construction sector becomes part of the solution to overcome the housing and environmental crisis, the lack of efficiency of this industry needs to be addressed. This inefficiency, characterized by low production capacity, high costs, and large workforce, are in part due to the low adoption of automation and robotic technologies, caused by insufficient knowledge and research measuring the impact of these technologies. This paper aims to measure the efficiency of introducing automation in a prefabrication environment of timber-frame structures, through a decision analysis tool. Four layout types with varying automation levels are explored using simulation modeling, while KPIs are exploited to measure the efficiency of each production environment. A sensitivity analysis is conducted to assess the most performing layout if a new type of wall, requiring fewer tasks, is introduced in the product mix. A design of experiments (DOE) is also performed on the fourth layout, a fixed robotic cell with the highest level of automation, to assess the most influential variables. Results show a positive increase in worker, space, and production efficiency as the level of automation increase. This research contributes to the body of knowledge by providing a decision analysis tool supporting the choice of an optimized layout for the prefabrication of timber-frame walls (TFW). The findings and the decision analysis tool should provide solid grounds for future exploration of automation and practice in the field.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, layouts, or code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions.
Acknowledgments
The authors are grateful to Natural Sciences and Engineering Research Council of Canada for the financial support through its CRD program (RDCPJ 533629-18) and IRC program (IRCPJ 461745-18). The authors are also grateful for the support from the industrial partner in this research as well as the funding from Mitacs through its Mitacs Acceleration Program (IT27102).
References
Ajayi, S., J. Brinklow-Harris, H. A. Alaka, and J. A. Dauda. 2019. “Managing the benefits and impediments to offsite construction in the UK construction industry.” In Proc., ARCOM 2019—Proc. of the 35th Annual Conf., 577–586. Leeds, UK: Association of Researchers in Construction Management.
Altaf, M. S., M. Al-Hussein, and H. Yu. 2014. “Wood-frame wall panel sequencing based on discrete-event simulation and particle swarm optimization.” In Proc., 31st Int. Symp. on Automation and Robotics in Construction and Mining (ISARC 2014). Oulu, Finland: International Association for Automation and Robotics in Construction.
Altaf, M. S., B. Bouferguene, H. Liu, M. Al-Hussein, and H. Yu. 2018. “Integrated production planning and control system for a panelized home prefabrication facility using simulation and RFID.” Autom. Constr. 85 (Jan): 369–383. https://doi.org/10.1016/j.autcon.2017.09.009.
Apostolides, A. D. 2008. A primer on multifactor productivity: Description, benefits, and uses. Washington, DC: DOT, Bureau of Transportation Statistics.
Bajjou, M. S., A. Chafi, A. Ennadi, and M. El Hammoumi. 2017. “The practical relationships between lean construction tools and sustainable development: A literature review.” J. Eng. Sci. Technol. Rev. 10 (4): 170–177. https://doi.org/10.25103/jestr.104.20.
Browning, R. C., E. A. Baker, J. A. Herron, and R. Kram. 2006. “Effects of obesity and sex on the energetic cost and preferred speed of walking.” J. Appl. Physiol. 100 (2): 390–398. https://doi.org/10.1152/japplphysiol.00767.2005.
Cambridge Academic Content Dictionary. 2022. “Meaning of efficiency in English.” Accessed January 17, 2023. https://dictionary.cambridge.org/dictionary/english/efficiency.
CHBA (Canadian Home Builder’s Association). 2022. Residential construction in Canada economic performance review 2021 with 2022 outlook. Edmonton, AB, Canada: CHBA.
Chea, C. P., Y. Bai, X. Pan, M. Arashpour, and Y. Xie. 2020. “An integrated review of automation and robotic technologies for structural prefabrication and construction.” Transp. Saf. Environ. 2 (2): 81–96. https://doi.org/10.1093/tse/tdaa007.
Correa, F. 2019. “Simulating wood-framing wall panels production with timed coloured petri nets.” In Proc., 36th Int. Symp. on Automation and Robotics in Construction, ISARC 2019, 1026–1033. Oulu, Finland: International Association for Automation and Robotics in Construction.
Darlow, G., J. O. B. Rotimi, and W. M. Shahzad. 2022. “Automation in New Zealand’s offsite construction (OSC): A status update.” Built Environ. Project Asset Manage. 12 (1): 38–52. https://doi.org/10.1108/BEPAM-11-2020-0174.
DellaCamera, C. 2022. Prefabricated home manufacturing in Canada. Melbourne, Australia: Ibisworld.
Duncheva, T., and F. F. Bradley. 2019. “Multifaceted productivity comparison of off-site timber manufacturing strategies in Mainland Europe and the United Kingdom.” J. Constr. Eng. Manage. 145 (8): 04019043. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001641.
Homag Group. 2021a. “Carpentry machine BEAMTEQ B-560.” Accessed July 31, 2022. https://www.homag.com/en/product-detail/carpentry-machine-beamteq-b-560/.
Homag Group. 2021b. “The first WEINMANN smartPrefab at WeberHaus.” Accessed August 29, 2021. https://www.homag.com/en/news-events/news/article/the-first-weinmann-smartprefab-at-weberhaus.
Hook, M., and L. Stehn. 2008. “Applicability of lean principles and practices in industrialized housing production.” Construct. Manage. Econ. 26 (10): 1091–1100. https://doi.org/10.1080/01446190802422179.
Jennings, G. R. 2004. “Business, social science methods used in.” Encyclopedia of social measurement, 219–230. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/B0-12-369398-5/00270-X.
Julien, E., P. Blanchet, and L. Gosselin. 2022. “Case-study: Fully prefabricated wood wall connection to improve building envelope and on-site efficiency.” Buildings 12 (12): 2185. https://doi.org/10.3390/buildings12122185.
Kalamees, T., Ü. Alev, and M. Pärnalaas. 2017. “Air leakage levels in timber frame building envelope joints.” Build. Environ. 116 (May): 121–129. https://doi.org/10.1016/j.buildenv.2017.02.011.
Kyjanek, O., B. Al Bahar, L. Vasey, B. Wannemacher, and A. Menges. 2019. “Implementation of an augmented reality AR workflow for human robot collaboration in timber prefabrication.” In Proc., 36th Int. Symp. on Automation and Robotics in Construction, ISARC 2019, 1223–1230. Oulu, Finland: International Association for Automation and Robotics in Construction.
Lachance, E., N. Lehoux, and P. Blanchet. 2022. “Automated and robotized processes in the timber-frame prefabrication construction industry: A state of the art.” In Proc., 2022 IEEE 6th Int. Conf. on Logistics Operations Management (GOL), 1–10. New York: IEEE.
Law, A. M., and W. David Kelton. 2000. Simulation modeling and analysis, 760. New York: McGraw-Hill.
Ledinek. 2022. “CLT production line in Canada.” Accessed August 27, 2022. https://www.ledinek.com/clt-production-line-in-canada.
Liu, H., M. Al-Hussein, and M. Lu. 2015. “BIM-based integrated approach for detailed construction scheduling under resource constraints.” Autom. Constr. 53 (May): 29–43. https://doi.org/10.1016/j.autcon.2015.03.008.
Liu, H., Y. Zhang, Z. Lei, H. Li, and S. Han. 2021. “Design for manufacturing and assembly: A BIM-enabled generative framework for building panelization design.” Adv. Civ. Eng. 2021: 5554551. https://doi.org/10.1155/2021/5554551.
Luo, Y., D. R. Riley, and M. J. Horman. 2005. “Lean principles for prefabrication in green design-build (GDB) projects.” In Proc., 13th Int. Group for Lean Construction Conf., 539–548. Sydney, Australia: International Group for Lean Construction.
Martinez, P., M. Livojevic, P. Jajal, D. R. Aldrich, M. Al-Hussein, and R. Ahmad. 2020. “Simulation-driven design of wood framing support systems for off-site construction machinery.” J. Constr. Eng. Manage. 146 (7): 04020075. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001853.
Nikakhtar, A., A. A. Hosseini, K. Y. Wong, and A. Zavichi. 2015. “Application of lean construction principles to reduce construction process waste using computer simulation: A case study.” Int. J. Serv. Oper. Manage. 20 (4): 461. https://doi.org/10.1504/IJSOM.2015.068528.
Orlowski, K. 2019. “Assessment of manufacturing processes for automated timber-based panelised prefabrication.” Buildings 9 (5): 125. https://doi.org/10.3390/buildings9050125.
Patro, S. G. K., and K. K. Sahu. 2015. “Normalization: A preprocessing stage.” Int. Adv. Res. J. Sci. Eng. Technol. 2 (3): 20–22. https://doi.org/10.17148/IARJSET.2015.2305.
Randek. 2021. “ZeroLabor robotic system.” Accessed August 29, 2021. https://www.randek.com/en/wall-floor-and-roof-production-lines/zerolabor.
Ritter, C., B. Barkokebas, Y. Zhang, and M. Al-Hussein. 2020. “A comparative study of offsite construction manufacturing techniques.” In Proc., Construction Research Congress 2020—Project Management and Controls, Materials, and Contracts, 495–504. Reston, VA: ASCE.
Rosarius, A., and B. G. de Soto. 2021. “On-site factories to support lean principles and industrialized construction.” Organ. Technol. Manage. Constr. 13 (1): 2353–2366. https://doi.org/10.2478/otmcj-2021-0004.
Ruiz, A., and J. Gagliardi. 2020. “Cours MQT 7000—Simulation de systèmes-Analyse des résultats.” Accessed September 30, 2022. https://sitescours.monportail.ulaval.ca/.
Santana-Sosa, A., and F. Riola-Parada. 2018. “A theoretical approach towards resource efficiency in multi-story timber buildings through BIM and lean.” In Proc., WCTE 2018—World Conf. on Timber Engineering. Oslo, Norway: World Conference on Timber Engineering.
Sargent, R. G. 2013. “Verification and validation of simulation models.” J. Simul. 7 (1): 12–24. https://doi.org/10.1057/jos.2012.20.
Simio. 2022. “What is Simio?” Accessed August 14, 2022. https://www.simio.com/about-simio/what-is-simio-simulation-software.php#:∼:text=Simio%20is%20designed%20to%20simplify%20model%20building%20by,then%20may%20be%20reused%20in%20multiple%20modeling%20projects.
Tompkins, J. A., J. A. White, Y. A. Bozer, and J. M. A. Tanchoco. 2010. Facilities planning. 4th ed. New York: Wiley.
UNEP (United Nations Environment Programme). 2020. 2020 global status report for buildings and construction: Towards a zero-emission, efficient and resilient buildings and construction sector. Nairobi, Kenya: UNEP.
Vafaei, N., R. A. Ribeiro, and L. M. C. Matos. 2018. “Data normalisation techniques in decision making: Case study with TOPSIS method.” Int. J. Inf. Decis. Sci. 10 (1): 19. https://doi.org/10.1504/IJIDS.2018.090667.
Vaha, P., T. Heikkila, P. Kilpelainen, M. Jarviluoma, and E. Gambao. 2013. “Extending automation of building construction: Survey on potential sensor technologies and robotic applications.” Autom. Constr. 36 (Dec): 168–178. https://doi.org/10.1016/j.autcon.2013.08.002.
Villanueva, E. M., H. Mamledesai, P. Martinez, P. Poostchi, and R. Ahmad. 2021. “Design and simulation of an automated robotic machining cell for cross-laminated timber panels.” Procedia CIRP 100 (Jan): 175–180. https://doi.org/10.1016/j.procir.2021.05.026.
Wagner, H. J., M. Alvarez, O. Kyjanek, Z. Bhiri, M. Buck, and A. Menges. 2020. “Flexible and transportable robotic timber construction platform–TIM.” Autom. Constr. 120 (Dec): 103400. https://doi.org/10.1016/j.autcon.2020.103400.
Wang, M., C. C. Wang, S. Sepasgozar, and S. Zlatanova. 2020. “A systematic review of digital technology adoption in off-site construction: Current status and future direction towards Industry 4.0.” Buildings 10 (11): 204. https://doi.org/10.3390/buildings10110204.
Wang, P., and S. M. AbouRizk. 2009. “Large-scale simulation modeling system for industrial construction.” Can. J. Civ. Eng. 36 (9): 1517–1529. https://doi.org/10.1139/L09-094.
Xie, H., W. Shen, Q. Hao, H. Yu, and Y. Tang. 2011. “Production simulation for prefab housing facilities.” In Proc., Annual Conf. on Canadian Society for Civil Engineering, 2917–2926. Surrey, BC, Canada: Canadian Society for Civil Engineering.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 2, 2022
Accepted: May 8, 2023
Published online: Jul 17, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 17, 2023
ASCE Technical Topics:
- Analysis (by type)
- Automation and robotics
- Building materials
- Buildings
- Construction engineering
- Construction industry
- Construction management
- Engineering fundamentals
- Engineering materials (by type)
- Facilities (by type)
- Industrial facilities
- Materials engineering
- Models (by type)
- Offsite construction
- Sensitivity analysis
- Simulation models
- Structural analysis
- Structural engineering
- Structures (by type)
- Systems engineering
- Wood and wood products
- Wood structures
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Hao Chen, Isabelle Y. S. Chan, Effects of Automation and Transparency on Human Psychophysiological States and Perceived System Performance in Construction Safety Automation: An Electroencephalography Experiment, Journal of Construction Engineering and Management, 10.1061/JCEMD4.COENG-14205, 150, 7, (2024).