Seismic Performance of Self-Centering Post-Tensioned Concrete Columns Reinforced with Steel–GFRP Bars and GFRP Spirals
Publication: Journal of Bridge Engineering
Volume 29, Issue 8
Abstract
A novel concept of hybrid reinforcement in the form of glass fiber‒reinforced polymer (GFRP) longitudinal column bars combined with steel longitudinal column bars and high-strength post-tensioning all-threaded rods is investigated in this research to construct bridge columns for seismic regions. Two half-scale specimens were constructed using grouted ducts to connect the columns to the footings as an accelerated bridge construction method. The first column was reinforced with a combination of mild steel and GFRP longitudinal bars (hybrid column) and the second with all-mild steel longitudinal bars, and both columns were confined with a double layer of GFRP spirals; this arrangement improves column longevity since GFRP materials do not corrode. Both specimens utilized high-strength all-threaded rods for post-tensioning. Carbon fiber‒reinforced polymer jackets were externally wrapped at the column bottom to confine the concrete in the plastic hinge region. The seismic behavior of both precast concrete specimens was assessed through quasi-static cyclic tests. Both columns exhibited satisfactory strength and deformability. The combination of post-tensioning bars with GFRP longitudinal bars improved the self-centering capability. The residual displacement of the hybrid column was decreased by 46% compared with the all-steel-reinforced column at 6.0% drift ratio. The elastic nature of the GFRP longitudinal bars provided substantial self-centering by reducing the residual displacement of the hybrid specimen thereby enhancing seismic resilience.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to acknowledge the financial support provided by the Mountain Plains Consortium through Grant No. MPC-609. The authors acknowledge donation of materials by Geneva Rock and Owens Corning Infrastructure Solutions, LLC. The authors acknowledge the assistance of M. Bryant, S. Neupane, D. Briggs, S. Shrestha, I. Dangol, and E. Williamson of the University of Utah for their assistance in carrying out the experiments.
References
AASHTO. 2011. ASHTO guide specifications for LRFD seismic bridge design. Washington, DC: AASHTO.
AASHTO. 2020a. ASHTO LRFD bridge design specifications. Washington, DC: AASHTO.
AASHTO. 2020b. AASHTO m275 standard specification for high-strength steel bars for prestressed concrete. Washington, DC: AASHTO.
Abdallah, E. A., and F. E. El-Salakawy. 2021. “Seismic behavior of high-strength concrete circular columns reinforced with glass fiber-reinforced polymer bars.” ACI Struct. J. 118 (5): 221–234.
Abdallah, E. A., and F. E. El-Salakawy. 2022. “Seismic performance of GFRP-RC circular columns with different aspect ratios and concrete strengths.” Eng. Struct. 257: 114092. https://doi.org/10.1016/j.engstruct.2022.114092.
ACI (American Concrete Institute) Committee 374. 2013. Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads. ACI 374.2R-13. Farmington Hills, MI: ACI.
ACI (American Concrete Institute) Committee 440. 2015. Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer (FRP) bars. ACI 440.1R-15. Farmington Hills, MI: ACI.
Ali, M. A., and E. El-Salakawy. 2016. “Seismic performance of GFRP-reinforced concrete rectangular columns.” J. Compos. Constr. 20 (3): 04015074. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000637.
Ameli, M. J., D. N. Brown, J. E. Parks, and C. P. Pantelides. 2016. “Seismic column-to-footing connections using grouted splice sleeves.” ACI Struct. J. 113 (5): 1021–1030. https://doi.org/10.14359/51688755.
ASTM. 2017. Standard specification for solid round glass fiber reinforced polymer bars for concrete reinforcement. ASTM 7957/D7957M-17. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard specification for high-strength steel bars for prestressed concrete. ASTM A722/A722M-18. West Conshohocken, PA: ASTM.
Barton, R. D., M. J. Ameli, and C. P. Pantelides. 2022. “Precast concrete bridge column‒footing connections with recessed grouted splice sleeve connectors.” ACI Struct. J. 119 (1): 215–226. https://doi.org/10.14359/51734218.
Billington, S. L., and J. K. Yoon. 2004. “Cyclic response of unbonded post-tensioned precast columns with ductile fiber-reinforced concrete.” J. Bridge Eng. 9 (4): 353–363. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:4(353).
Chopra, A. K. 2007. Dynamics of structures, theory and application to earthquake engineering. 4th ed. Upper Saddle River, NJ: Pearson and Prentice Hall.
CSA (Canadian Standards Association). 2012. Design and construction of building components with fibre-reinforced polymers. CSA S806. Rexdale, ON, Canada: CSA.
Dangol, I., and C. P. Pantelides. 2022. “Resilient posttensioned bridge bent with buckling restrained brace.” J. Bridge Eng. 27 (2): 1–17. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001823.
Dangol, I., D. Thapa, and C. P. Pantelides. 2022. “Experimental evaluation of post-tensioned bridge bent under cyclic loads and comparison to hybrid bridge bents.” Eng. Struct. 256: 113962. https://doi.org/10.1016/j.engstruct.2022.113962.
Elchalakani, G. M., and G. Ma. 2017. “Tests of glass fibre reinforced polymer rectangular concrete columns subjected to concentric and eccentric axial loading.” Eng. Struct. 151: 93–104. https://doi.org/10.1016/j.engstruct.2017.08.023.
Elshamandy, G. M., S. A. Farghaly, and B. Benmokrane. 2018. “Experimental behavior of glass fiber-reinforced polymer reinforced concrete columns under lateral cyclic load.” ACI Struct. J. 115 (2): 337–349. https://doi.org/10.14359/51700985.
Guerrini, G., J. I. Restrepo, M. Massari, and A. Vervelidis. 2015. “Seismic behavior of posttensioned self-centering precast concrete dual-shell steel columns.” J. Struct. Eng. 141 (4): 04014115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001054.
Haber, Z. B., M. S. Saiidi, and D. H. Sanders. 2015. “Behavior and simplified modeling of mechanical reinforcing bar splices.” ACI Struct. J. 112 (2): 179–188. https://doi.org/10.14359/51687455.
Hadhood, A., H. M. Mohamed, F. Ghrib, and B. Benmokrane. 2017. “Efficiency of glass-fiber reinforced-polymer (GFRP) discrete hoops and bars in concrete columns under combined axial and flexural loads.” Composites, Part B 114: 223–236. https://doi.org/10.1016/j.compositesb.2017.01.063.
Hadi, M. N. S., H. Karim, and M. N. Sheikh. 2016. “Experimental investigations on circular concrete columns reinforced with GFRP bars and helices under different loading conditions.” J. Compos. Constr. 20 (4): 04016009. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000670.
Hales, T. A., C. P. Pantelides, and L. D. Reaveley. 2016. “Experimental evaluation of slender high-strength concrete columns with GFRP and hybrid reinforcement.” J. Compos. Constr. 20 (6): 04016050. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000709.
Karim, H., M. N. Sheikh, and M. N. S. Hadi. 2016. “Axial load‒axial deformation behavior of circular concrete columns reinforced with GFRP bars and helices.” Constr. Build. Mater. 112: 1147–1157. https://doi.org/10.1016/j.conbuildmat.2016.02.219.
Kawashima, K. 1997. “Japanese seismic design specifications of highway bridges and the performance-based design.” In Seismic design methodologies for the next generation of codes, edited by P. Fajfar and H. Krawinkler, 371–382. Rotterdam, Netherlands: Balkema.
Kharal, Z., K. J. Carrette, and S. A. Sheikh. 2021. “Large concrete columns internally reinforced with GFRP spirals subjected to seismic loads.” J. Compos. Constr. 25 (3): 04021014. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001121.
Kharal, Z., and S. A. Sheikh. 2018. “Seismic performance of square concrete columns confined with glass fiber-reinforced polymer ties.” J. Compos. Constr. 22 (6): 04018054. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000884.
Kharal, Z., and S. A. Sheikh. 2020. “Seismic behavior of square and circular concrete columns with GFRP reinforcement.” J. Compos. Constr. 24 (1): 04019059. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000988.
Liu, J., and S. A. Sheikh. 2013. “Fiber-reinforced polymer-confined circular columns under simulated seismic loads.” ACI Struct. J. 110 (6): 941–951.
Mackie, K., and B. Stojadinovic. 2004. “Residual displacement and post-earthquake capacity of highway bridges.” In Proc., 13th World Conf. on Earthquake Engineering. Tokyo, Japan: International Association of Earthquake Engineering.
Matsumoto, E. E. 2009. “Emulative precast bent cap connections for seismic regions: Component tests-grouted duct specimen (unit 2).” Rep. No. ECS-CSUS-2009-02. Sacramento, CA: California State Univ.
NCHRP (National Cooperative Highway Research Program). 2011. Report 698: Application of accelerated bridge construction connections in moderate-to-high seismic regions. Washington, DC: NCHRP.
Neupane, S., M. J. Ameli, and C. P. Pantelides. 2023. “Numerical modeling of column piers with recessed spliced sleeves and intentional debonding for accelerated bridge construction.” J. Struct. Eng. 149 (3): 1–18. https://doi.org/10.1061/jsendh.steng-11769.
Ou, Y. C., M. S. Tsai, K. C. Chang, and G. C. Lee. 2010. “Cyclic behavior of precast segmental concrete bridge columns with high performance or conventional steel reinforcing bars as energy dissipation bars.” Earthquake Eng. Struct. Dyn. 39 (11): 1181–1198. https://doi.org/10.1002/eqe.986.
Palermo, A., S. Pampanin, and D. Marriott. 2007. “Design, modeling, and experimental response of seismic resistant bridge piers with posttensioned dissipating connections.” J. Struct. Eng. 133 (11): 1648–1661. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1648).
Pampanin, S., D. Marriott, and A. Palermo. 2010. PRESSS design handbook. Auckland, New Zealand: New Zealand Concrete Society.
Pantelides, C. P., M. E. Gibbons, and L. D. Reaveley. 2013. “Axial load behavior of concrete columns confined with GFRP spirals.” J. Compos. Constr. 17 (3): 305–313. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000357.
Sankholkar, P., C. P. Pantelides, and T. Hales. 2018. “Confinement model for concrete columns reinforced with GFRP spirals.” J. Compos. Constr. 22 (3): 04018007. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000843.
Tavassoli, A., J. Liu, and S. A. Sheikh. 2015. “Glass fiber-reinforced polymer-reinforced circular column under simulated seismic loads.” ACI Struct. J. 112 (1): 103–114. https://doi.org/10.14359/51687227.
Tazarv, M., and M. S. Saiidi. 2015. “UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones.” Eng. Struct. 99: 413–422. https://doi.org/10.1016/j.engstruct.2015.05.018.
Thapa, D., and C. P. Pantelides. 2021. “Self-centering bridge bent with stretch length anchors as a tension-only hysteretic hybrid system.” J. Struct. Eng. 147 (10): 04021163. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003146.
Wright, J. W., and C. P. Pantelides. 2021a. “Axial compression capacity of concrete columns reinforced with corrosion-resistant metallic reinforcement.” J. Infrastruct. Preserv. Resilience 2 (1): 1–15. https://doi.org/10.1186/s43065-021-00016-3.
Wright, J. W., and C. P. Pantelides. 2021b. “Axial compression capacity of concrete columns reinforced with corrosion-resistant hybrid reinforcement.” Constr. Build. Mater. 302: 124209. https://doi.org/10.1016/j.conbuildmat.2021.124209.
Wu, R. Y., and C. P. Pantelides. 2017. “Rapid seismic repair of reinforced concrete bridge columns.” ACI Struct. J. 114 (5): 1339–1350.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Oct 12, 2023
Accepted: Mar 29, 2024
Published online: May 30, 2024
Published in print: Aug 1, 2024
Discussion open until: Oct 30, 2024
ASCE Technical Topics:
- Bars (structure)
- Columns
- Engineering fundamentals
- Engineering materials (by type)
- Fiber reinforced polymer
- Fibers
- Glass fibers
- Hybrid methods
- Material mechanics
- Material properties
- Materials engineering
- Mechanical properties
- Methodology (by type)
- Polymer
- Seismic tests
- Steel columns
- Structural engineering
- Structural members
- Structural systems
- Synthetic materials
- Tension
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.