Determining the Reasonable Completed Bridge State of a Self-Anchored Suspension Bridge with a Spatial Cable System Based on Minimum Bending Strain Energy: An Analytical Algorithm
Publication: Journal of Bridge Engineering
Volume 28, Issue 5
Abstract
The main cable of a self-anchored suspension bridge (SSB) is directly anchored to the two ends of a stiffening girder, and the stiffening girder is therefore subjected to enormous axial force and bending moment. This paper proposes a new method to determine the reasonable completed bridge state of the SSB in preliminary design. This method can accurately find the main cable shape that satisfies the minimum bending strain energy of the stiffening girder without being trapped in a local optimum. The method is suitable for the SSB with three-dimensional cables. Based on the segmental catenary theory, the relational expression of the component of the main cable tension in the longitudinal direction and the hanger tension is derived. Also, the partial differential equations for the condition at which the stiffening girder has minimum bending strain energy are also presented, which innovatively incorporates the effect of the vertical curve of the stiffening girder. The problem of solving simultaneous equations is converted into an optimization problem, which is then solved using the generalized reduced gradient method to obtain the hanger tensions and the main cable shape in the completed bridge state. The solving process is clear and has explicit physical meaning. Besides, there is no need to build a finite-element model. A calculation example is used to verify the applicability and accuracy of the proposed method. The mechanical behaviors of the cable-only system are further analyzed. On this basis, the approximate expressions of the component of the main cable tension in the longitudinal direction and the partial derivative of this tension component with respect to each vertical component of the hanger tension are provided.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was financially supported by the National Key R&D Program of China (No. 2022YFB3706703) and the National Natural Science Foundation of China (No. 52078134), which are gratefully acknowledged.
References
Cao, H., X. Qian, Y. Zhou, Z. Chen, and H. Zhu. 2018. “Feasible range for midtower lateral stiffness in three-tower suspension bridges.” J. Bridge. Eng. 23 (3): 06017009. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001196.
Cao, H., Y.-L. Zhou, Z. Chen, and M. A. Wahab. 2017. “Form-finding analysis of suspension bridges using an explicit iterative approach.” Struct. Eng. Mech. 62 (1): 85–95. https://doi.org/10.12989/sem.2017.62.1.085.
Chen, D. W., F. T. K. Au, L. G. Tham, and P. K. K. Lee. 2000. “Determination of initial cable forces in prestressed concrete cable-stayed bridges for given design deck profiles using the force equilibrium method.” Comput. Struct. 74 (1): 1–9. https://doi.org/10.1016/S0045-7949(98)00315-0.
Gabriele, G. A., and K. M. Ragsdell. 1980. “Large scale nonlinear programming using the generalized reduced gradient method.” J. Mech. Des. 102 (3): 566–573.
He, J., C. Li, H. Ke, Y. Liu, Y. Zhang, C. Dong, H. Li, and Z. Zhang. 2019. “A simplified calculation method of length adjustment of datum strand for the main cable with small sag.” Adv. Civ. Eng. 2019: 1–8.
Irvine, H. M. 1981. Cable structures. New York: Dover, MIT Press.
Jung, M.-R., M.-J. Jang, M. M. Attard, and M.-Y. Kim. 2017. “Elastic stability behavior of self-anchored suspension bridges by the deflection theory.” Int. J. Struct. Stab. Dyn. 17 (4): 1750050. https://doi.org/10.1142/S021945541750050X.
Jung, M.-R., D.-J. Min, and M.-Y. Kim. 2013. “Nonlinear analysis methods based on the unstrained element length for determining initial shaping of suspension bridges under dead loads.” Comput. Struct. 128: 272–285. https://doi.org/10.1016/j.compstruc.2013.06.014.
Jung, M.-R., D.-J. Min, and M.-Y. Kim. 2015a. “Simplified analytical method for optimized initial shape analysis of self-anchored suspension bridges and its verification.” Math. Probl. Eng. 2015: 1–14.
Jung, M.-R., S.-U. Shin, M. M. Attard, and M.-Y. Kim. 2015b. “Deflection theory for self-anchored suspension bridges under live load.” J. Bridge Eng. 20 (7): 04014093. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000687.
Kim, H.-K., and M.-Y. Kim. 2012. “Efficient combination of a TCUD method and an initial force method for determining initial shapes of cable-supported bridges.” Int. J. Steel Struct. 12 (2): 157–174. https://doi.org/10.1007/s13296-012-2002-1.
Kim, H.-K., M.-J. Lee, and S.-P. Chang. 2002. “Non-linear shape-finding analysis of a self-anchored suspension bridge.” Eng. Struct. 24 (12): 1547–1559. https://doi.org/10.1016/S0141-0296(02)00097-4.
Kim, H.-K., M.-J. Lee, and S.-P. Chang. 2006. “Determination of hanger installation procedure for a self-anchored suspension bridge.” Eng. Struct. 28 (7): 959–976. https://doi.org/10.1016/j.engstruct.2005.10.019.
Kim, M.-Y., M.-R. Jung, and M. M. Attard. 2019. “Unstrained length-based methods determining an optimized initial shape of 3-dimensional self-anchored suspension bridges.” Comput. Struct. 217: 18–35. https://doi.org/10.1016/j.compstruc.2019.03.008.
Kim, M.-Y., D.-Y. Kim, M.-R. Jung, and M. M. Attard. 2014. “Improved methods for determining the 3 dimensional initial shapes of cable-supported bridges.” Int. J. Steel Struct. 14 (1): 83–102. https://doi.org/10.1007/s13296-014-1009-1.
Lasdon, L. S., R. L. Fox, and M. W. Ratner. 1974. “Nonlinear optimization using the generalized reduced gradient method.” RAIRO Oper. Res. Rech. Oper. 8 (3): 73–103.
Li, J., A. Li, and M. Q. Feng. 2013. “Sensitivity and reliability analysis of a self-anchored suspension bridge.” J. Bridge Eng. 18 (8): 703–711. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000424.
Li, J.-h., D.-m. Feng, A.-q. Li, and H.-h. Yuan. 2016. “Determination of reasonable finished state of self-anchored suspension bridges.” J. Cent. South Univ. 23: 209–219. https://doi.org/10.1007/s11771-016-3064-6.
Li, T., and Z. Liu. 2018. “A recursive algorithm for determining the profile of the spatial self-anchored suspension bridges.” KSCE J. Civ. Eng. 23 (3): 1283–1292. https://doi.org/10.1007/s12205-019-0542-z.
Lu, P., J. Chen, J. Zhong, and P. Lu. 2014. “Optimization analysis model of self-anchored suspension bridge.” Math. Probl. Eng. 2014: 1–8.
O’Brien, W., and A. Francis. 1964. “Cable movements under two-dimensional loads.” J. Struct. Div. 90 (3): 89–123. https://doi.org/10.1061/JSDEAG.0001110.
Ren, W.-X., M.-G. Huang, and W.-H. Hu. 2008. “A parabolic cable element for static analysis of cable structures.” Eng. Comput. 25 (4): 366–384. https://doi.org/10.1108/02644400810874967.
Song, C., R. Xiao, and B. Sun. 2019. “Improved method for shape finding of long-span suspension bridges.” Int. J. Steel Struct. 20 (1): 247–258. https://doi.org/10.1007/s13296-019-00283-7.
Sun, Y., H.-P. Zhu, and D. Xu. 2015. “New method for shape finding of self-anchored suspension bridges with three-dimensionally curved cables.” J. Bridge Eng. 20 (2): 04014063. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000642.
Sun, Y., H.-P. Zhu, and D. Xu. 2016. “A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables.” Eng. Struct. 110: 184–208. https://doi.org/10.1016/j.engstruct.2015.11.040.
Thai, H.-T., and D.-H. Choi. 2013. “Advanced analysis of multi-span suspension bridges.” J. Constr. Steel Res. 90: 29–41. https://doi.org/10.1016/j.jcsr.2013.07.015.
Thai, H.-T., and S.-E. Kim. 2011. “Nonlinear static and dynamic analysis of cable structures.” Finite Elem. Anal. Des. 47 (3): 237–246. https://doi.org/10.1016/j.finel.2010.10.005.
Vu, T.-V., H.-E. Lee, and Q.-T. Bui. 2012. “Nonlinear analysis of cable-supported structures with a spatial catenary cable element.” Struct. Eng. Mech. 43 (5): 583–603. https://doi.org/10.12989/sem.2012.43.5.583.
Wang, H.-l., and S.-f. Qin. 2016. “Shape finding of suspension bridges with interacting matrix.” Eur. J. Environ. Civ. Eng. 20 (8): 831–840. https://doi.org/10.1080/19648189.2015.1084379.
Wang, S., Z. Zhou, Y. Gao, and Y. Huang. 2015. “Analytical calculation method for the preliminary analysis of self-anchored suspension bridges.” Math. Probl. Eng. 2015: 1–12.
Wang, X., H. Wang, Y. Sun, X. Mao, and S. Tang. 2020. “Process-independent construction stage analysis of self-anchored suspension bridges.” Autom. Constr. 117: 103227. https://doi.org/10.1016/j.autcon.2020.103227.
Wang, X., H. Wang, J. Zhang, Y. Sun, Y. Bai, Y. Zhang, and H. Wang. 2021. “Form-finding method for the target configuration under dead load of a new type of spatial self-anchored hybrid cable-stayed suspension bridges.” Eng. Struct. 227: 111407. https://doi.org/10.1016/j.engstruct.2020.111407.
Wriggers, P. 2008. Nonlinear finite element methods. New York: Springer.
Zhang, W.-M., J.-Q. Chang, and G.-M. Tian. 2022. “FEM-based shape-finding and force-assessment of suspension bridges via completed loop adjustment.” J. Bridge Eng. 27 (1): 04021098. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001804.
Zhang, W.-M., L.-Y. Shi, L. Li, and Z. Liu. 2018. “Methods to correct unstrained hanger lengths and cable clamps’ installation positions in suspension bridges.” Eng. Struct. 171: 202–213. https://doi.org/10.1016/j.engstruct.2018.05.039.
Zhang, W.-M., C.-Y. Yang, and J.-Q. Chang. 2021. “Cable shape and construction parameters of triple-tower double-cable suspension bridge with two asymmetrical main spans.” J. Bridge Eng. 26 (2): 04020127. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001674.
Zhang, X. 2004. “Investigation on aerodynamic stability of long-span suspension bridges under erection.” J. Wind Eng. Ind. Aerodyn. 92 (1): 1–8. https://doi.org/10.1016/j.jweia.2003.08.005.
Zhang, Z., J. Zhang, W. Hao, J. Dai, and Y. Shen. 2010. “Hangzhou Jiangdong bridge designed as a spatial self-anchored suspension bridge, China.” Struct. Eng. Int. 20 (3): 303–307. https://doi.org/10.2749/101686610792016673.
Zhou, Y., and S. Chen. 2019. “Iterative nonlinear cable shape and force finding technique of suspension bridges using elastic catenary configuration.” J. Eng. Mech. 145 (5): 04019031.
Zhu, W., Y. Ge, G. Fang, and J. Cao. 2021. ‘“A novel shape finding method for the main cable of suspension bridge using nonlinear finite element approach.”’ Appl. Sci. 11 (10): 4644. https://doi.org/10.3390/app11104644.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: May 16, 2022
Accepted: Dec 23, 2022
Published online: Feb 22, 2023
Published in print: May 1, 2023
Discussion open until: Jul 22, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.