Effect of the Addition of Sawdust on Clay Brick Construction Properties and Thermal Insulation: Experimental and Simulation Approaches
Publication: Journal of Architectural Engineering
Volume 30, Issue 1
Abstract
The construction industry plays a significant role in shaping our environment and economy. However, it also substantially impacts the environment, including the depletion of natural resources, increased energy consumption, and waste generation. The green building trend has recently gained significant attention in recent years to mitigate the negative impacts of the building industry, focusing on sustainable materials and practices. One of the primary materials used in this field is clay brick, which leads to soil depletion over time. In this context, this study explores the potential of sawdust waste as a partial replacement for clay in brick production, aiming to reduce the depletion of natural resources while enhancing the properties and performance of the produced bricks. The study consists of two main phases: experimental and simulation. In the experimental phase, clay brick samples were produced by adding sawdust at different ratios (1%, 2%, 4%, 8%, and 10% of the raw weight), and various physical and mechanical properties of the produced samples were tested to ensure their suitability for construction use. Also, the thermal properties of the proposed brick were measured to investigate the effect of sawdust addition on brick thermal insulation. Consequently, thermal conductivity and specific heat were measured. In the simulation phase, DesignBuilder software (version 7.0.2) was used to investigate the impact of the proposed material on building envelope’s performance and heat gain reduction. All experimental and simulation results were compared with the traditional clay brick measurements, which reveal a significant improvement in brick properties and performance with an increase in comprehensive strength of up to 192.3% and a reduction in energy consumption reaching 11.27%. The study results showed significant improvement in the properties and performance of the produced bricks, indicating the potential of using sawdust waste as a sustainable material for green buildings.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
References
Abdeen, A., A. A. Serageldin, M. G. E. Ibrahim, A. El-Zafarany, S. Ookawara, and R. Murata. 2019. “Experimental, analytical, and numerical investigation into the feasibility of integrating a passive Trombe wall into a single room.” Appl. Therm. Eng. 154: 751–768. https://doi.org/10.1016/j.applthermaleng.2019.03.090.
Abdel Rahim, N. S. 2016. “Analytical study of archaeological bricks from coptic period, Dayr AL-Naqlun (The Monastery of the Angel Ghubriyal), Fayoum, Egypt.” IOSR J. Appl. Geol. Geophys. 4: 30–38. https://doi.org/10.9790/0990-0404013038.
Alabduljabbar, H., O. Benjeddou, C. Soussi, M. A. Khadimallah, and R. Alyousef. 2021. “Effects of incorporating wood sawdust on the firing program and the physical and mechanical properties of fired clay bricks.” J. Build. Eng. 35: 102106. https://doi.org/10.1016/j.jobe.2020.102106.
Al-Fakih, A., B. S. Mohammed, M. S. Liew, and E. Nikbakht. 2019. “Incorporation of waste materials in the manufacture of masonry bricks: An update review.” J. Build. Eng. 21: 37–54. https://doi.org/10.1016/j.jobe.2018.09.023.
Ali, T., S. Yehia, and M. El-Didamony. 2017. “Low cost housing in Egypt by using stabilized soil bricks.” Int. J. Civ. Mech. Energy Sci. 3 (3): 154–165. https://doi.org/10.24001/ijcmes.3.3.1.
ASTM. 2003. Standard test methods for sampling and testing brick and structural clay tile. ASTM C67-03. West Conshohocken, PA: ASTM.
Attia, S., and A. de Herde. 2009. “Impact and potential of community scale low-energy retrofit: Case study in Cairo.” In Proc., 3rd CIB International Conf. on Smart and Sustainable Built Environment (SASBE) 2009. Delft, Netherlands: TU Delft.
Attia, S., A. Evrard, and E. Gratia. 2012. “Development of benchmark models for the Egyptian residential buildings sector.” Appl. Energy 94: 270–284. https://doi.org/10.1016/j.apenergy.2012.01.065.
Azhar Saleem, M., S. Minhaj Saleem Kazmi, and S. Abbas. 2017. “Clay bricks prepared with sugarcane bagasse and rice husk ash—A sustainable solution.” MATEC Web Conf. 120: 03001. https://doi.org/10.1051/matecconf/201712003001.
Beck, C., J. Grieser, M. Kottek, F. Rubel, and B. Rudolf. 2005. “Characterizing global climate change by means of köppen climate classification.” Klimastatusbericht 51: 139–149.
Bullibabu, K., and M. Abidali. 2018. “Development and characterization of fired clay bricks by admixture of bagasse, palm fruit fiber and paper residue.” Int. J. Current Eng. Sci. Res. 5 (4): 505–509.
Charai, M., H. Sghiouri, A. Mezrhab, M. Karkri, K. Elhammouti, and H. Nasri. 2020. “Thermal performance and characterization of a sawdust–clay composite material.” Procedia Manuf. 46: 690–697. https://doi.org/10.1016/j.promfg.2020.03.098.
Chemani, H., and B. Chemani. 2013. “Valorization of wood sawdust in making porous clay brick.” Sci. Res. Essays 8 (15): 609–614. https://doi.org/10.5897/SRE12.608.
Crespo-López, L., and G. Cultrone. 2022. “Improvement in the petrophysical properties of solid bricks by adding household glass waste.” J. Build. Eng. 59: 105039. https://doi.org/10.1016/j.jobe.2022.105039.
Dabaieh, M., J. Heinonen, D. El-Mahdy, and D. M. Hassan. 2020. “A comparative study of life cycle carbon emissions and embodied energy between sun-dried bricks and fired clay bricks.” J. Cleaner Prod. 275: 122998. https://doi.org/10.1016/j.jclepro.2020.122998.
de Silva, G. H. M. J. S., and M. L. C. Surangi. 2017. “Effect of waste rice husk ash on structural, thermal and run-off properties of clay roof tiles.” Constr. Build. Mater. 154: 251–257. https://doi.org/10.1016/j.conbuildmat.2017.07.169.
ELFayoumy, Y., M. ElSaied, and M. ELWazeer. 2020. “Sustainable building material technology as an approach to thermal comfort in low income housing in hot regions.” Bull. Fac. Eng. Mansoura Univ. 43 (2): 12–21. https://doi.org/10.21608/bfemu.2020.94482.
Eliche-Quesada, D., F. A. Corpas-Iglesias, L. Pérez-Villarejo, and F. J. Iglesias-Godino. 2012. “Recycling of sawdust, spent earth from oil filtration, compost and marble residues for brick manufacturing.” Constr. Build. Mater. 34: 275–284. https://doi.org/10.1016/j.conbuildmat.2012.02.079.
EOS (Egyptian Organization for Standards & Quality). 2006. Standard test methods for sampling and testing brick and structural. Cairo, Egypt: EOS.
Heiri, O., A. F. Lotter, and G. Lemcke. 2001. “Loss on ignition as a method for estimating organic and carbonate content in sediments: Reproducibility and comparability of results.” J. Paleolimnol. 25 (1): 101–110. https://doi.org/10.1023/A:1008119611481.
Kadir, A. A., and A. Sarani. 2012. “An overview of wastes recycling in fired clay bricks.” Int. J. Integr. Eng. 4 (2): 53–69.
Laborel-Préneron, A., J. E. Aubert, C. Magniont, C. Tribout, and A. Bertron. 2016. “Plant aggregates and fibers in earth construction materials: A review.” Constr. Build. Mater. 111: 719–734. https://doi.org/10.1016/j.conbuildmat.2016.02.119.
Madurwar, M. V., R. V. Ralegaonkar, and S. A. Mandavgane. 2013. “Application of agro-waste for sustainable construction materials: A review.” Constr. Build. Mater. 38: 872–878. https://doi.org/10.1016/j.conbuildmat.2012.09.011.
MOH (Ministry of Housing). 2001. Egyptian code of practice for design and construction of concrete structures. Cairo, Egypt: MOH.
Mohammadhosseini, H., R. Alyousef, N. H. Abdul Shukor Lim, M. M. Tahir, H. Alabduljabbar, A. M. Mohamed, and M. Samadi. 2020. “RETRACTED: Waste metalized film food packaging as low cost and ecofriendly fibrous materials in the production of sustainable and green concrete composites.” J. Cleaner Prod. 258: 120726. https://doi.org/10.1016/j.jclepro.2020.120726.
Monteiro, S. N., and C. M. F. Vieira. 2014. “On the production of fired clay bricks from waste materials: A critical update.” Constr. Build. Mater. 68: 599–610. https://doi.org/10.1016/j.conbuildmat.2014.07.006.
Muñoz Velasco, P., M. P. Morales Ortíz, M. A. Mendívil Giró, and L. Muñoz Velasco. 2014. “Fired clay bricks manufactured by adding wastes as sustainable construction material—A review.” Constr. Build. Mater. 63: 97–107. https://doi.org/10.1016/j.conbuildmat.2014.03.045.
Phonphuak, N., P. Chindaprasirt, F. Pacheco-Torgal, P. B. Lourenço, J. A. Labrincha, S. Kumar, and P. Chindaprasirt. 2015. “Types of waste, properties, and durability of pore-forming waste-based fired masonry bricks.” In Eco-efficient masonry bricks and blocks: Design, properties and durability, 103–127. Amsterdam, Netherlands: Elsevier.
Phonphuak, N., S. Kanyakam, and P. Chindaprasirt. 2016. “Utilization of waste glass to enhance physical–mechanical properties of fired clay brick.” J. Cleaner Prod. 112: 3057–3062. https://doi.org/10.1016/j.jclepro.2015.10.084.
Saboya, F., G. C. Xavier, and J. Alexandre. 2007. “The use of the powder marble by-product to enhance the properties of brick ceramic.” Constr. Build. Mater. 21 (10): 1950–1960. https://doi.org/10.1016/j.conbuildmat.2006.05.029.
Seddik Hassan, A. M., A. Abdeen, A. S. Mohamed, and B. Elboshy. 2022. “Thermal performance analysis of clay brick mixed with sludge and agriculture waste.” Constr. Build. Mater. 344: 128267. https://doi.org/10.1016/j.conbuildmat.2022.128267.
Shaqour, E. N., A. H. Abo Alela, and A. A. Rsheed. 2021. “Improved fired clay brick compressive strength by recycling wastes of blacksmiths’ workshops.” J. Eng. Appl. Sci. 68 (1): 1–14. https://doi.org/10.1186/s44147-021-00002-2.
Sheta, S., and N. El Laithy. 2015. “Brick Kiln industry and workers’ chronic respiratory health problems in Mit Ghamr District, Dakahlia governorate.” Egypt. J. Occup. Med. 39 (1): 37–51. https://doi.org/10.21608/ejom.2015.809.
Sutcu, M. 2015. “Influence of expanded vermiculite on physical properties and thermal conductivity of clay bricks.” Ceram. Int. 41 (2): 2819–2827. https://doi.org/10.1016/j.ceramint.2014.10.102.
Sutcu, M., and S. Akkurt 2009. “The use of recycled paper processing residues in making porous brick with reduced thermal conductivity.” Ceramics Int. 35 (7): 2625–2631. https://doi.org/10.1016/j.ceramint.2009.02.027.
Uchechukwu Elinwa, A. 2006. “Effect of addition of sawdust ash to clay bricks.” Civ. Eng. Environ. Syst. 23 (4): 263–270. https://doi.org/10.1080/10286600600763149.
Udawattha, C., and R. Halwatura. 2017. “Life cycle cost of different Walling material used for affordable housing in tropics.” Case Stud. Constr. Mater. 7: 15–29. https://doi.org/10.1016/j.cscm.2017.04.005.
Wang, K., K. Chiang, J. Perng, and C. Sun. 1998. “The characteristics study on sintering of municipal solid waste incinerator ashes.” J. Hazard. Mater. 59 (2–3): 201–210. https://doi.org/10.1016/S0304-3894(97)00147-7.
Zaidan, S. A., and M. H. Omar. 2018. “The effects of bauxite, metakaolin, and porosity on the thermal properties of prepared Iraqi clays refractory mortars.” Appl. Phys. A 124 (5): 386. https://doi.org/10.1007/s00339-018-1759-2.
Zhang, Z., Y. C. Wong, A. Arulrajah, and S. Horpibulsuk. 2018. “A review of studies on bricks using alternative materials and approaches.” Constr. Build. Mater. 188: 1101–1118. https://doi.org/10.1016/j.conbuildmat.2018.08.152.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 30 • Issue 1 • March 2024
Copyright
© 2023 American Society of Civil Engineers.
History
Received: May 13, 2023
Accepted: Oct 18, 2023
Published online: Dec 27, 2023
Published in print: Mar 1, 2024
Discussion open until: May 27, 2024
ASCE Technical Topics:
- Bricks
- Building materials
- Buildings
- Clays
- Construction engineering
- Construction management
- Engineering materials (by type)
- Engineering mechanics
- Geomechanics
- Geotechnical engineering
- Green buildings
- Materials engineering
- Soil analysis
- Soil mechanics
- Soil properties
- Soil strength
- Soils (by type)
- Structural engineering
- Structures (by type)
- Thermal properties
- Thermodynamics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.