Tunable Acoustic Properties in Reconfigurable Kerf Structures
Publication: Journal of Architectural Engineering
Volume 29, Issue 3
Abstract
Freeform structures are appealing in architecture owing to their ability to combine pleasing aesthetics and functionality. Regarding architectural functionality, freeform structures have the potential to meet desired acoustic requirements in indoor architecture through the proper design of materials and geometries. Kerfing is one of the practical methods to generate reconfigurable freeform structures from rigid planar construction materials. This study aims to explore tunable room acoustic characteristics through the use of kerf structures. In this study, we investigate acoustic responses of kerf structures made out of a medium density fiber board having a hexagon spiral kerf pattern with varying cut densities. Experiments are conducted to measure the acoustic properties (e.g., absorption coefficient) of the kerf unit cells with different cut densities. We then design kerf patterns using the parametric design method and explore the flexibility of kerf structures with different kerf cut densities. We model the kerf structures of varying kerf cut density and shape reconfigurations and use a ray-tracing simulation to study their impacts on the acoustic performance, i.e., reverberation times, of a small office space. Overall, this study leverages the unique attributes of kerf structures such as different cut densities and shape reconfigurations to tune the room acoustics in addition to their usage in indoor architectures due to their pleasing aesthetics.
Practical Applications
In modern society, people spend 90% of their time indoors. The indoor acoustic characteristics can greatly affect the occupants’ productivity, well-being, and health. Kerf structures present an opportunity to achieve both aesthetically pleasing characteristics and desired acoustic performance of regularly used indoor spaces, such as offices. The reconfigurable kerf structures can create an acoustic-comfort environment that can lower the ambient noise and tune the reverberation time. Kerf structures can be easily assembled by fabricating modular units to satisfy different aesthetic and functional demands.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is based upon work supported by the National Science Foundation under CMMI 1912823 and CMMI 1913688. Part of this study was supported by Innovation X Project, at Texas A&M University. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
References
Anna, G. 2021. “Recommended reverberation times for 7 key spaces.” Accessed January 19, 2023. https://blog.siniat.com.au/recommended-reverberation-times-for-7-key-space.
Belanger, Z. M. 2018. “Slumped glass: Auxetics and acoustics.” In Proc., 38th Annual Conf. of the Association for Computer Aided Design in Architecture: Recalibration: On Imprecision and Infidelity, 244–249. Mexico City: ACADIA.
Beranek, L. 2006. “Analysis of Sabine and Eyring equations and their application to concert hall audience and chair absorption.” J. Acoust. Soc. Am. 120: 1399–1410. https://doi.org/10.1121/1.2221392.
Capone, M., and E. Lanzara. 2018. “Kerf bending: Ruled double curved surfaces manufacturing.” In Proc., 22th Conf. of the Iberoamerican Society of Digital Graphics. São Carlos, Brazil: SIGraDi.
Chen, R., C. Turman, M. Jiang, N. Kalantar, M. Moreno, and A. Muliana. 2020. “Mechanics of kerf patterns for creating freeform structures.” Acta Mech. 231 (9): 3499–3524. https://doi.org/10.1007/s00707-020-02713-8.
Holterman, A. 2018. “Pattern kerfing for responsive wooden surfaces: A formal approach to produce flexible panels with acoustic performance.” Master’s thesis, Architecture, Urbanism and Building Sciences, Delft Univ. of Technology.
Hung, M. 2017. “Leading the IoT: Gartner insights on how to lead in a connected world.” Accessed May 25, 2021. https://www.gartner.com/imagesrv/books/iot/iotEbook_digital.pdf.
Ivanovic-Sekularac, J., N. Šekularac, and J. C. Tovarovic. 2012. “Wood as element of façade cladding in modern architecture.” Tech. Technol. Educ. Manage. 7: 1304–1310.
Jakimovska Popovska, V., B. Iliev, and I. Spiroski. 2016. “Characteristics of medium density fiberboards for furniture production and interior application.” South East Eur. J. Archit. Des. 2016: 1–5. https://doi.org/10.3889/seejad.2016.10013.
Jaramillo, A. M., and C. Steel. 2015. Architectural acoustics. Pocket Architecture: Technical design series. London: Routledge.
Kalantar, N., and A. Borhani. 2018. “Informing deformable formworks—Parameterizing deformation behavior of a non-stretchable membrane via kerfing.” In Proc., 23rd CAADRIA Conf.: Learning, Adapting and Prototyping, 339–348. Beijing: Tsinghua Univ.
Olivieri, O., J. Bolton, and T. Yoo. 2006. “Measurement of transmission loss of materials using a standing wave tube.” In Proc., 35th Int. Congress and Exposition on Noise Control Engineering. Washington, DC: Institute of Noise Control Engineering.
Peters, B. T. 2011. “Responsive acoustic surfaces: Computing sonic effects.” In Proc., 29th eCAADe Conf.: Respecting Fragile Places, 819–828. Ljubljana, Slovenia: Univ. of Ljubljana, Faculty of Architecture.
Quam, R., I. Martínez, C. Lorenzo, A. Bonmati, M. Rosa-Zurera, P. Jarabo, and J. L. Arsuaga. 2012. “Studying audition in fossil hominins: A new approach to the evolution of language?” In Psychology of language, edited by M. K. Jackson, 1–37. New York: Nova Science Publishers.
SEA. 2022. “Human voice frequency range.” Accessed January 19, 2023. https://seaindia.in/blogs/human-voice-frequency-range/.
Shahid, Z., C. G. Bond, M. S. Johnson, J. E. Hubbard, Jr., N. Kalantar, and A. Muliana. 2022a. “Dynamic response of flexible viscoelastic kerf structures of freeform shapes.” Int. J. Solids Struct. 254–255: 111895. https://doi.org/10.1016/j.ijsolstr.2022.111895.
Shahid, Z., J. E. Hubbard, N. Kalantar, and A. Muliana. 2022b. “An investigation of the dynamic response of architectural kerf structures.” Acta Mech. 233 (1): 157–181. https://doi.org/10.1007/s00707-021-03108-z.
Shahid, Z., M. Johnson, C. Bond, J. Hubbard, N. Kalantar, and A. Muliana. 2021. “Dynamic responses of architectural kerf structures.” In American Society of Composites 36th Technical Conf, edited by O. Ochoa. Dayton, OH: American Society for Composites (ASC).
van der Harten, A. 2013. “Pachyderm acoustical simulation: Towards open-source sound analysis.” Archit. Des. 83 (2): 138–139. https://doi.org/10.1002/ad.1570.
Varjo, J., V. Hongisto, A. Haapakangas, H. Maula, H. Koskela, and J. Hyönä. 2015. “Simultaneous effects of irrelevant speech, temperature and ventilation rate on performance and satisfaction in open-plan offices.” J. Environ. Psychol. 44: 16–33. https://doi.org/10.1016/j.jenvp.2015.08.001.
Vercammen, M. L. 2013. “Sound concentration caused by curved surfaces.” In Proc., of Meetings on Acoustics—The 21st Int. Congress on Acoustics. Montreal: Acoustical Society of America.
WELL Standard. 2020. “Reverberation time .” Accessed January 29, 2023. https://standard.wellcertified.com/comfort/reverberation-time.
Wulfrank, T., Y. Jurkiewicz, and E. Kahle. 2014. “Design-focused acoustic analysis of curved geometries using a differential raytracing technique.” Build. Acoust. 21 (1): 87–95. https://doi.org/10.1260/1351-010X.21.1.87.
Zarrinmehr, S., E. Akleman, M. Ettehad, N. Kalantar, and A. Borhani. 2017a. “Kerfing with generalized 2D meander-patterns: Conversion of planar rigid panels into locally-flexible panels with stiffness control.” In Proc., 17th Int. Conf.: Future Trajectories of Computation in Design, 276–293. Istanbul, Turkey: Istanbul Technical University.
Zarrinmehr, S., E. Akleman, M. Ettehad, N. Kalantar, A. B. Haghighi, and S. Sueda. 2017b. “An algorithmic approach to obtain generalized 2D meander-patterns.” In Proc., 20th Annual Bridges Conf., 87–94. Waterloo, Canada: University of Waterloo.
Zarrinmehr, S., M. Ettehad, N. Kalantar, A. Borhani, S. Sueda, and E. Akleman. 2017c. “Interlocked Archimedean spirals for conversion of planar rigid panels into locally flexible panels with stiffness control.” Comput. Graph. 66: 93–102. https://doi.org/10.1016/j.cag.2017.05.010.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 29 • Issue 3 • September 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 19, 2022
Accepted: Apr 6, 2023
Published online: May 24, 2023
Published in print: Sep 1, 2023
Discussion open until: Oct 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.