Hybrid Modeling Method for the Complex Radiative Cooling Network in the Chinese Space Station
Publication: Journal of Aerospace Engineering
Volume 36, Issue 3
Abstract
Thermal analysis of spacecraft involves complex heat flux outside space and heat transfer calculation of equipment inside space, which is the basic guarantee of its long-term stable operation. In this paper, the core module of the Chinese Space Station is taken as an example to conduct hybrid modeling of its complex radiation and heat dissipation network. The external heat flux received by spacecraft is affected by many factors, such as its attitude, orbit parameters, and solar orientation. First, based on the defined reference coordinate system, the whole station is divided into eight quadrants. Then, an intelligent occlusion algorithm is proposed to solve the complex occlusion relationship according to the space quadrant method and fuzzy logic, and then the external heat flux is obtained. Finally, the dynamic response of the station under different conditions is studied by combining traditional mechanism modeling and an intelligent algorithm, and the maximum heat dissipation capacity was obtained. The results show that the temperature control valve opening will seriously affect the main flow of the loop, and the maximum difference can be . In addition, the external heat flux changes periodically, so that the flow of each branch and the valve opening also changes periodically. In the sunlight area, the radiator receiving the external heat flux is about 77,000–90,000 W, and the maximum heat dissipation capacity is 12,000 W. Those values are 28,000 W and 22,000 W, respectively, in the shadowed area. Moreover, the hybrid modeling method proposed in this paper has an important reference value for spacecraft thermal analysis and research in other fields.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models used in the study are in the published article.
Acknowledgments
Thank you for the support provided by the China Academy of Space Technology (Grant No. KH52630701).
References
Alcayde, V., A. Vercher-Martínez, and F. J. Fuenmayor. 2021. “Thermal control of a spacecraft: Backward-implicit scheme programming and coating materials analysis.” Adv. Space Res. 68 (4): 1975–1988. https://doi.org/10.1016/j.asr.2021.03.041.
Bednova, V. B., and M. V. Yumashev. 2018. “Thermo-mechanical loads on a spacecraft in low Earth orbits.” Acta Astronaut. 150 (Sep): 39–43. https://doi.org/10.1016/j.actaastro.2018.02.041.
Belyavskii, A. E., N. S. Kudryavtseva, and A. E. Sorokin. 2022. “Hybrid radiator for spacecraft thermal control systems.” Russ. Eng. Res. 42 (1): 57–59. https://doi.org/10.3103/S1068798X22010038.
Bulut, M. 2021. “Thermal design, analysis, and testing of the first Turkish 3U communication CubeSat in low earth orbit.” J. Therm. Anal. Calorim. 143 (6): 4341–4353. https://doi.org/10.1007/s10973-021-10566-z.
Cao, Y., D. Cao, G. He, and L. Liu. 2020. “Thermal alternation induced vibration analysis of spacecraft with lateral solar arrays in orbit.” Appl. Math. Modell. 86 (Aug): 166–184. https://doi.org/10.1016/j.apm.2020.05.008.
Dilmi, S. 2022. “Enhancing flight envelope for a nonlinear aeroelastic wing-section using adaptive fuzzy sliding mode control law.” J. Aerosp. Eng. 35 (3): 04022009. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001401.
Gadalla, M., M. Ghommem, G. Bourantas, and K. Miller. 2019. “Modeling and thermal analysis of a moving spacecraft subject to solar radiation effect.” Processes 7 (11): 807. https://doi.org/10.3390/pr7110807.
Hartsfield, C. R., T. E. Shelton, B. O. Palmer, and R. O’Hara. 2020. “All-metallic phase change thermal management systems for transient spacecraft loads.” J. Aerosp. Eng. 33 (4): 04020039. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001150.
Inoue, K., H. Ohta, H. Asano, O. Kawanami, R. Imai, K. Suzuki, Y. Shinmoto, T. Kurimoto, and S. Matsumoto. 2021. “Heat loss analysis of flow boiling experiments onboard international space station with unclear thermal environmental conditions (2nd report: Liquid-vapor two-phase flow conditions at test section inlet).” Microgravity Sci. Technol. 33 (5): 1–14. https://doi.org/10.1007/s12217-021-09902-7.
Khaniki, H. B., and S. Karimian. 2016. “Satellite attitude determination using absorbed heat fluxes.” J. Aerosp. Eng. 29 (6): 04016053. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000644.
Khidirova, C. M., et al. 2021. “Neuro-fuzzy algorithm for clustering multidimensional objects in conditions of incomplete data.” J. Phys. Conf. Ser. 1901 (1): 012036.
Krzywanski, J., and W. Nowak. 2016. “Modeling of bed-to-wall heat transfer coefficient in a large-scale CFBC by fuzzy logic approach.” Int. J. Heat Mass Transfer 94 (Sep): 327–334. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.038.
Li, Y., L. Gong, M. Xu, and Y. Joshi. 2021. “A review of thermo-hydraulic performance of metal foam and its application as heat sinks for electronics cooling.” J. Electron. Packag. 143 (3): 030801. https://doi.org/10.1115/1.4048861.
Li, Y. Z., and K. M. Lee. 2011. “Thermohydraulic dynamics and fuzzy coordination control of a microchannel cooling network for space electronics.” IEEE Trans. Ind. Electron. 58 (2): 700–708. https://doi.org/10.1109/TIE.2010.2045999.
Mikhailov, M. M., S. A. Yuryev, and A. N. Lapin. 2019. “Prospects for applying powders as pigments for spacecraft thermal control coatings.” Acta Astronaut. 165 (Dec): 191–194. https://doi.org/10.1016/j.actaastro.2019.09.009.
Nasution, M. K., M. Elveny, R. Syah, I. Behroyan, and M. Babanezhad. 2022. “Numerical investigation of water forced convection inside a copper metal foam tube: Genetic algorithm (GA) based fuzzy inference system (GAFIS) contribution with CFD modeling.” Int. J. Heat Mass Transfer 182 (Jan): 122016. https://doi.org/10.1016/j.ijheatmasstransfer.2021.122016.
Nikitin, V. F., E. I. Skryleva, and Y. G. Weisman. 2022. “Control of capillary driven fluid flows for safe operation of spacecraft fluid supply systems using artificial porous media.” Acta Astronaut. 194 (May): 544–548. https://doi.org/10.1016/j.actaastro.2021.12.009.
Qiu, Y., D. Garg, L. Zhou, C. R. Kharangate, S. M. Kim, and I. Mudawar. 2020. “An artificial neural network model to predict mini/micro-channels saturated flow boiling heat transfer coefficient based on universal consolidated data.” Int. J. Heat Mass Transfer 149 (Mar): 119211. https://doi.org/10.1016/j.ijheatmasstransfer.2019.119211.
Srivatsn, S. M., V. V. V. S. Kumar, G. Sakthivel, D. Saravanakumar, and N. R. Kiran. 2021. “Analysis of fuzzy and PID control in pacemaker with cardiovascular model.” J. Phys.: Conf. Ser. 1969 (1): 012066. https://doi.org/10.1088/1742-6596/1969/1/012066.
Yang, T., S. Zhao, T. Gao, Z. Zhao, and P. Zhang. 2021. “Effects of external heat flux during orbital period of spacecraft on operating characteristics of loop heat pipe.” J. Phys.: Conf. Ser. 1820 (1): 012089. https://doi.org/10.1088/1742-6596/1820/1/012089.
Yuan, M., Y.-Z. Li, Y. Sun, and B. Ye. 2022. “The space quadrant and intelligent occlusion calculation methods for the external heat flux of China space station.” Appl. Therm. Eng. 212 (Jul): 118572. https://doi.org/10.1016/j.applthermaleng.2022.118572.
Zhang, C., X. Bu, J. He, C. Liu, G. Lin, and J. Miao. 2020. “Simulation of evaporation and sublimation process in porous plate water sublimator based on a reduced CFD model.” Int. J. Heat Mass Transfer 154 (Jun): 119787. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119787.
Zhang, H., X. Zhao, Q. Mei, Y. Wang, S. Song, and F. Yu. 2021. “On-orbit thermal deformation prediction for a high-resolution satellite camera.” Appl. Therm. Eng. 195 (Aug): 117152. https://doi.org/10.1016/j.applthermaleng.2021.117152.
Zheng, C., J. Qi, J. Song, and L. Cheng. 2020. “Effects of the rotation of international space station main radiator on suppressing thermal anomaly of alpha magnetic spectrometer caused by flight attitude adjustment.” Appl. Therm. Eng. 171 (May): 115100. https://doi.org/10.1016/j.applthermaleng.2020.115100.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 3, 2022
Accepted: Dec 16, 2022
Published online: Feb 24, 2023
Published in print: May 1, 2023
Discussion open until: Jul 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.