Aerodynamic Design Modification for Utility Helicopters
Publication: Journal of Aerospace Engineering
Volume 36, Issue 4
Abstract
Wind tunnel testing and accompanying numerical analyses are the essential methods to improve and optimize the aerodynamic design of helicopters. The focus is on improving the aerodynamic performance and the handling qualities. Of special interest is the parasitic drag as a major factor for the power consumption and the wake flow caused by the rotor head, which can interact with the helicopter tail and influence stability. For this purpose, design modifications and their influence on the aerodynamic characteristics of the helicopter as well as on the flow field are investigated. The design modifications are evaluated by force and moment measurements, stereo particle image velocimetry, and high fidelity computational analysis. This allows us to compare the different investigation methods and design configurations to each other. The investigations are performed on the Kopter AW09, a 2.8-t-class single engine utility helicopter. Design modifications of the upper fuselage are considered for the presented investigations.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions. The helicopter geometry is confidential, but the geometry of the helicopter configurations is shown in a figure to illustrate the shape and the differences between the configurations. Also, the absolute force values/coefficients are confidential. The force coefficients are represented without the assignment of values. But the differences of the force coefficents between the configurations can still be observed and analyzed.
References
Batrakov, A., A. Kusyumov, S. Mikhailov, and G. Barakos. 2018. “Aerodynamic optimization of helicopter rear fuselage.” Aerosp. Sci. Technol. 77 (Jun): 704–712. https://doi.org/10.1016/j.ast.2018.03.046.
Benek, J., J. L. Steger, and F. Dougherty. 1983. “A flexible grid embedding technique with application to the Euler equations.” In Proc., 6th Computational Fluid Dynamics Conf. Reston, VA: American Institute of Aeronautics and Astronautics. https://doi.org/10.2514/6.1983-1944.
Chan, W., R. Gomez, S. Rogers, and P. Buning. 2002. “Best practices in overset grid generation.” In Proc., 32nd AIAA Fluid Dynamics Conf. and Exhibit. Reston, VA: American Institute of Aeronautics and Astronautics. https://arc.aiaa.org/doi/abs/10.2514/6.2002-3191.
De Gregorio, F. 2017. “Helicopter fuselage model drag reduction by active flow control systems.” In Proc., 43rd European Rotorcraft Forum. London: Royal Aeronautical Society.
Grawunder, M., R. Reß, and C. Breitsamter. 2014. “Helicopter aft-body drag reduction by passive flow control.” In Proc., 40th European Rotorcraft Forum. London: Royal Aeronautical Society.
Grawunder, M., R. Reß, and C. Breitsamter. 2016. “Thermographic transition detection for low-speed wind-tunnel experiments.” AIAA J. 54 (6): 2012–2016. https://doi.org/10.2514/1.J054490.
Keys, C. N., and R. Wiesner. 1975. “Guidelines for reducing helicopter parasite drag.” J. Am. Helicopter Soc. 20 (1): 31–40. https://doi.org/10.4050/JAHS.20.31.
Khier, W. 2012. “Numerical analysis of hub and fuselage interference to reduce helicopter drag.” In Proc., 38th European Rotorcraft Forum, Amsterdam, Netherlands: Netherlands Association of Aeronautical Engineers.
Leishman, J. 2006. Principles of helicopter aerodynamics. 2nd ed. Cambridge, UK: Cambridge University Press.
Le Pape, A., C. Lienard, C. Verbeke, M. Pruvost, and J.-L. De Coninck. 2015. “Helicopter fuselage drag reduction using active flow control: A comprehensive experimental investigation.” J. Am. Helicopter Soc. 60 (3): 1–12. https://doi.org/10.4050/JAHS.60.032003.
Martin, P. B., A. D. Overmeyer, P. E. Tanner, J. S. Wilson, and L. N. Jenkins. 2014. “Helicopter fuselage active flow control in presence of a rotor.” In Proc., AHS 70th Annual Forum. Washington, DC: NASA.
Menter, F. 1994. “Two equations eddy viscosity turbulence models for engineerings applications.” AIAA J. 32 (8): 1598–1605. https://doi.org/10.2514/3.12149.
O’Brien, D. M., Jr. 2006. “Analysis of computational modeling techniques for complete rotorcraft configurations.” Ph.D. thesis, Dept. of School of Aerospace Engineering, Georgia Institute of Technology.
Raffel, M., C. Willert, S. Wereley, and J. Kompenhans. 2007. Particle image velocimetry: A practical guide. 2nd ed. New York: Springer.
Reich, D., B. Elbing, C. Berezin, and S. Schmitz. 2014. “Water tunnel flow diagnostics of wake structures downstream of a model helicopter rotor hub.” J. Am. Helicopter Soc. 59 (3): 1–12. https://doi.org/10.4050/JAHS.59.032001.
Reich, D., R. Shenoy, M. Smith, and S. Schmitz. 2016. “A review of 60 years of rotor hub drag and wake physics: 1954–2014.” J. Am. Helicopter Soc. 61 (7): 1–17. https://doi.org/10.4050/JAHS.61.022007.
Reich, D., K. Sinding, and S. Schmitz. 2018. “Visualization of a helicopter rotor hub wake.” Exp. Fluids 59 (7): 116. https://doi.org/10.1007/s00348-018-2571-7.
Renaud, T., D. O’Brien, M. Smith, and M. Potsdam. 2008. “Evaluation of isolated fuselage and rotor–fuselage interaction using computational fluid dynamics.” J. Am. Helicopter Soc. 53 (1): 3–17. https://doi.org/10.4050/JAHS.53.3.
Reß, R., M. Grawunder, and C. Breitsamter. 2014. “Parasite drag reduction of a twin engine lightweight helicopter configuration.” In Proc., 63rd German Aerospace Congress. Cologne, Germany: German Aerospace Center.
Reß, R., M. Pulfer, F. Hirsch, A. Kummel, and C. Breitsamter. 2021. “Aerodynamic design modification of the Kopter sh09 helicopter.” In Proc., 47th European Rotorcraft Forum 2021. Arlington County, VA: Leonardo.
Schaeffler, N. W., B. G. Allan, O. D. Wong, and P. E. Tanner. 2014. “Experimental investigation of active aerodynamic load reduction on a rotorcraft fuselage with rotor effects.” In Proc., 32nd AIAA Applied Aerodynamics Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Schmitz, S., C. Tierney, D. Reich, N. Jaffa, L. Centolanza, and M. Thomas. 2021. “Three rotor hub flow prediction workshops (2016-2020): What did we learn & what’s next?” In Proc., 77th Annual Vertical Flight Society Forum and Technology Display, FORUM 2021. Fairfax, VA: Vertical Flight Society.
Sciacchitano, A., and B. Wieneke. 2016. “PIV uncertainty propagation.” Meas. Sci. Technol. 27 (8): 084006. https://doi.org/10.1088/0957-0233/27/8/084006.
Seddon, J. 1990. Basic helicopter aerodynamics. London: BSP Professional Books.
Siemens. 2021. Siemens Simcenter STAR-CCM+ User Guide version 2021.1. Munich, Germany: Siemens.
Stalewski, W., and J. Zoltak. 2012. “Optimisation of the helicopter fuselage with simulation of main and tail rotor influence.” In Proc., 28th Int. Congress of the Aeronautical Sciences. Guelph, ON, Canada: International Credential Assessment Service of Canada.
Stroub, R., and J. J. Rabbot. 1975. “Wasted fuel: Another reason for drag reduction.” In Proc., 31st Annual National Forum of the American Helicopter Society, Washington, DC: American Helicopter Society.
Stuhlpfarrer, M., A. Kümmel, and C. Breitsamter. 2018. “Investigations of helicopter wake flow including rotor-head motion.” J. Aircr. 55 (5): 2114–2126. https://doi.org/10.2514/1.C034689.
Vogel, F., C. Breitsamter, and N. Adams. 2011. “Aerodynamic investigations on a helicopter fuselage.” In Proc., 29th AIAA Applied Aerodynamics Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Wagner, S. 1973. “Problems of estimating the drag of a helicopter.” In Proc., AGARD Conf. No. 124. Washington, DC: NATO Intergovernmental Organization.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 22, 2022
Accepted: Jan 11, 2023
Published online: Mar 27, 2023
Published in print: Jul 1, 2023
Discussion open until: Aug 27, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.