Numerical Simulation of Continuous Morphing Wing with Leading Edge and Trailing Edge Parabolic Flaps
Publication: Journal of Aerospace Engineering
Volume 36, Issue 5
Abstract
The present study numerically investigates the aerodynamic performance of the morphing airfoil and wing with leading edge (LE) and trailing edge (TE) parabolic flaps. Reynolds-averaged Navier-Stokes (RANS) equations coupled with the Spalart-Allmaras (S-A) turbulence model are employed to simulate the flow fields. Firstly, the parameterization method for the morphing airfoil with LE and TE parabolic flaps is proposed. Secondly, the influence of several design parameters, namely, LE droop angle, LE droop position, TE deflection angle, and TE deflection position, on the airfoil aerodynamics are further explored. Moreover, the aspect ratio (AR) effect for the wing based on the morphing airfoil is also investigated. Simulation results demonstrate that the parabolic flaps outperform the articulated flaps in lift generation, drag reduction, and aerodynamic efficiency enhancement, with an improvement in and by 39.2% and 108.4% at , respectively. A larger LE droop angle can increase the stall margin, whereas the LE droop position barely influences airfoil aerodynamics at small angles of attack. The increment of the TE deflection angle significantly augments the lift. As the TE deflection position moves downstream, the suction peaks at the LE and TE are decreased and flow separation is also delayed. Furthermore, a larger AR can achieve higher efficiency, whereas a smaller AR is more beneficial for flow separation suppression.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors acknowledge support from the National Natural Science Foundation of China (Nos. 12102431, 11902320, and 12002340).
References
Abdessemed, C., A. Bouferrouk, and Y. Yao. 2022. “Effects of an unsteady morphing wing with seamless side-edge transition on aerodynamic performance.” Energies 15 (3): 1093. https://doi.org/10.3390/en15031093.
Abdessemed, C., Y. Yao, and A. Bouferrouk. 2021. “Near stall unsteady flow responses to morphing flap deflections.” Fluids 6 (5): 180. https://doi.org/10.3390/fluids6050180.
Allmaras, S. R., and F. T. Johnson. 2012. “Modifications and clarifications for the implementation of the Spalart-Allmaras turbulence model.” In Proc., 7th Int. Conf. on Computational Fluid Dynamics (ICCFD7). Edwards AFB, CA: Air Force Research Laboratory.
Ameduri, S., and A. Concilio. 2020. “Morphing wings review: Aims, challenges, and current open issues of a technology.” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 1: 0954406220944423. https://doi.org/10.1177/09544062209444.
Barbarino, S., O. Bilgen, R. M. Ajaj, M. I. Friswell, and D. J. Inman. 2011a. “A review of morphing aircraft.” J. Intell. Mater. Syst. Struct. 22 (9): 823–877. https://doi.org/10.1177/1045389X11414084.
Barbarino, S., R. Pecora, L. Lecce, S. Ameduri, and E. Calvi. 2009. “A novel SMA-based concept for airfoil structural morphing.” J. Mater. Eng. Perform. 18 (5): 696–705. https://doi.org/10.1007/s11665-009-9356-3.
Barbarino, S., R. Pecora, L. Lecce, A. Concilio, S. Ameduri, and L. De Rosa. 2011b. “Airfoil structural morphing based on SMA actuator series: Numerical and experimental studies.” J. Intell. Mater. Syst. Struct. 22 (10): 987–1004. https://doi.org/10.1177/1045389X11416032.
Bashir, M., S. Longtin-Martel, R. M. Botez, and T. Wong. 2021. “Aerodynamic design optimization of a morphing leading edge and trailing edge airfoil–application on the UAS-S45.” Appl. Sci. 11 (4): 1664. https://doi.org/10.3390/app11041664.
Chinwicharnam, K., E. D. G. Ariza, J. M. Moschetta, and C. Thipyopas. 2015. “A computation study on the aerodynamic influence of interaction wing-propeller for a tilt-body MAV.” Aircr. Eng. Aerosp. Technol. 87 (6): 521–529. https://doi.org/10.1108/AEAT-06-2014-0087.
Dimino, I., F. Moens, R. Pecora, A. De Gaspari, S. Ricci, S. Ameduri, A. Concilio, U. Mercurio, and G. M. Carossa. 2022. “Morphing wing technologies within the Airgreen 2 project.” In Proc., AIAA Scitech 2022 Forum. Reston, VA: American Institute of Aeronautics and Astronautics.
Fincham, J. H. S., and M. I. Friswell. 2015. “Aerodynamic optimisation of a camber morphing aerofoil.” Aerosp. Sci. Technol. 43 (Jun): 245–255. https://doi.org/10.1016/j.ast.2015.02.023.
Hao, F., T. Tang, Y. Gao, Y. Li, S. Yi, and J. Lu. 2021. “Continuous morphing trailing-edge wing concept based on multi-stable nanomaterial.” Chin. J. Aeronaut. 34 (7): 219–231. https://doi.org/10.1016/j.cja.2020.03.041.
Hunsaker, D. F., J. T. Reid, B. Moorthamers, and J. J. Joo. 2018. “Geometry and aerodynamic performance of parabolic trailing-edge flaps.” In Proc., AIAA Aerospace Sciences Meeting. Reston, VA: American Institute of Aeronautics and Astronautics.
Kan, Z., D. Li, T. Shen, J. Xiang, and L. Zhang. 2020. “Aerodynamic characteristics of morphing wing with flexible leading-edge.” Chin. J. Aeronaut. 33 (10): 2610–2619. https://doi.org/10.1016/j.cja.2020.03.012.
Li, D., et al. 2018. “A review of modelling and analysis of morphing wings.” Prog. Aerosp. Sci. 100 (Jun): 46–62. https://doi.org/10.1016/j.paerosci.2018.06.002.
Li, Y., W. Ge, J. Zhou, Y. Zhang, D. Zhao, Z. Wang, and D. Dong. 2021. “Design and experiment of concentrated flexibility-based variable camber morphing wing.” Chin. J. Aeronaut. 35 (5): 455–469. https://doi.org/10.1016/j.cja.2021.04.030.
Liu, W., H. Zhu, S. Zhou, Y. Bai, Y. Wang, and C. Zhao. 2013. “In-plane corrugated cosine honeycomb for 1D morphing skin and its application on variable camber wing.” Chin. J. Aeronaut. 26 (4): 935–942. https://doi.org/10.1016/j.cja.2013.04.015.
Lu, W., Y. Tian, and P. Liu. 2017. “Aerodynamic optimization and mechanism design of flexible variable camber trailing-edge flap.” Chin. J. Aeronaut. 30 (3): 988–1003. https://doi.org/10.1016/j.cja.2017.03.003.
Lyu, Z., and J. R. Martins. 2015. “Aerodynamic shape optimization of an adaptive morphing trailing-edge wing.” J. Aircr. 52 (6): 1951–1970. https://doi.org/10.2514/1.C033116.
Ma, T., Y. Liu, D. Yang, Z. Zhang, X. Wang, and S. Hao. 2021. “Research on the design of smart morphing long-endurance UAVs.” Aeronaut. J. 125 (1283): 22–41. https://doi.org/10.1017/aer.2020.82.
Magrini, A., and E. Benini. 2018. “Aerodynamic optimization of a morphing leading edge airfoil with a constant arc length parameterization.” J. Aerosp. Eng. 31 (2): 04017093. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000812.
Magrini, A., E. Benini, R. Ponza, C. Wang, H. H. Khodaparast, M. I. Friswell, V. Landersheim, D. Laveuve, and C. Contell Asins. 2019. “Comparison of constrained parameterisation strategies for aerodynamic optimisation of morphing leading edge airfoil.” Aerospace 6 (3): 31. https://doi.org/10.3390/aerospace6030031.
Majid, T., and B. W. Jo. 2021. “Comparative aerodynamic performance analysis of camber morphing and conventional airfoils.” Appl. Sci. 11 (22): 10663. https://doi.org/10.3390/app112210663.
Meguid, S. A., Y. Su, and Y. Wang. 2017. “Complete morphing wing design using flexible-rib system.” Int. J. Mech. Mater. Des. 13 (1): 159–171. https://doi.org/10.1007/s10999-015-9323-0.
Meyer, P., S. Lück, T. Spuhler, C. Bode, C. Hühne, J. Friedrichs, and M. Sinapius. 2021. “Transient dynamic system behavior of pressure actuated cellular structures in a morphing wing.” Aerospace 8 (3): 89. https://doi.org/10.3390/aerospace8030089.
Rodriguez, A. 2007. “Morphing aircraft technology survey.” In Proc., 45th AIAA Aerospace Sciences Meeting and Exhibit. Reston, VA: American Institute of Aeronautics and Astronautics.
Spalart, P., and S. Allmaras. 1992. “A one-equation turbulence model for aerodynamic flows.” In Proc., 30th Aerospace Sciences Meeting and Exhibit. Reston, VA: American Institute of Aeronautics and Astronautics.
Sun, R., G. Chen, C. Zhou, L. Zhou, and J. Jiang. 2013. “Multidisciplinary design optimization of adaptive wing leading edge.” Sci. China Technol. Sci. 56 (7): 1790–1797. https://doi.org/10.1007/s11431-013-5250-1.
Ting, E., D. Chaparro, N. Nguyen, and G. E. Fujiwara. 2018. “Optimization of variable-camber continuous trailing-edge flap configuration for drag reduction.” J. Aircr. 55 (6): 2217–2239. https://doi.org/10.2514/1.C034810.
Ullah, A. H., C. Fabijanic, J. Estevadeordal, Z. S. Montgomery, D. F. Hunsaker, and J. J. Joo. 2019. “Experimental and numerical evaluation of the performance of parabolic flaps.” In Proc., AIAA Aviation 2019 Forum. Reston, VA: American Institute of Aeronautics and Astronautics.
Vasista, S., L. Tong, and K. C. Wong. 2012. “Realization of morphing wings: A multidisciplinary challenge.” J. Aircr. 49 (1): 11–28. https://doi.org/10.2514/1.C031060.
Wang, Y., and G. C. Zha. 2020. “Study of Mach number effect for 3D co-flow jet wings at cruise conditions.” In Proc., AIAA Scitech 2020 Forum. Reston, VA: American Institute of Aeronautics and Astronautics.
Weisshaar, T. A. 2013. “Morphing aircraft systems: Historical perspectives and future challenges.” J. Aircr. 50 (2): 337–353. https://doi.org/10.2514/1.C031456.
Wu, R., C. Soutis, S. Zhong, and A. J. A. J. Filippone. 2017. “A morphing aerofoil with highly controllable aerodynamic performance.” Aeronaut. J. 121 (1235): 54–72. https://doi.org/10.1017/aer.2016.113.
Yan, B., Y. Li, P. Dai, and S. Liu. 2019. “Aerodynamic analysis, dynamic modeling, and control of a morphing aircraft.” J. Aerosp. Eng. 32 (5): 04019058. https://doi.org/10.1061/(ASCE)AS.1943-5525.0001047.
Yokozeki, T., A. Sugiura, and Y. Hirano. 2014. “Development and wind tunnel test of variable camber morphing wing.” In Proc., 22nd AIAA/ASME/AHS Adaptive Structures Conf. Reston, VA: American Institute of Aeronautics and Astronautics.
Zhang, Y. Q., W. J. Ge, Z. A. Zhang, X. J. Mo, and Y. H. Zhang. 2019. “Design of compliant mechanism-based variable camber morphing wing with nonlinear large deformation.” Int. J. Adv. Rob. Syst. 16 (6): 1729881419886740. https://doi.org/10.1177/1729881419886740.
Zhang, Y. Z., H. Y. Xu, Y.W. Chu, and Y. Xu. 2021. “Two-dimensional numerical study of the pulsed co-flow jet.” Fluid Dyn. 56 (3): 361–370. https://doi.org/10.1134/S0015462821030137.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 18, 2022
Accepted: Dec 12, 2022
Published online: Jun 23, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.