Probabilistic Analysis and Time Variation Model of Concrete Compressive Strength in Existing Buildings
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 9, Issue 3
Abstract
Probabilistic analysis and time variation model of concrete compressive strength in existing buildings were conducted based on relevant site testing data. The data were collected from rebound hammer (RH) method and core test method. There were 73,840 of RH test data and 4,149 of core test data. First, the data were normalized through dividing by the cube strength, to eliminate the concrete grade effect. The probability distribution analysis showed that the normal distribution is more suitable than the log-normal distribution. Moreover, it was found that the mean value of the core test data was higher than that of the RH data. Further, regression analysis on the data was carried out, and two quadratic functions were adopted to capture the time variation models of the compressive strength based on the RH data, and the core test data, respectively. Furthermore, some more data were obtained by the Genetic algorithm-back propagation (GA-BP) neural network method, and the time variation models were accordingly updated including the new data. Finally, the relationship between the RH model and core test model was discussed, and two approximately linear curves existed from 0 to 30 years and 31 to 60 years. Hopefully, this probabilistic analysis and the time variation model can be helpful in the assessment of the bearing capacity and evaluation of structure reliability in concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research has been generously supported by the National Natural Science Foundation of China (Grant Nos. 52038006 and 51878395), Introduction and Education Plan for Young and Innovative Talents in Colleges and Universities of Shandong Province, and Shandong Jianzhu University Engineering Appraisal and Reinforcement Research Institute Ltd. for providing the data, which are gratefully acknowledged by the authors.
References
ACI Committee 209. 1992. Prediction of creep, shrinkage, and temperature effects in concrete structures. Farmington Hills, MI: ACI.
Branson, D. E., and K. M. Kripanarayanan. 1971. “Loss of prestress, camber and deflection of non-composite and composite prestressed concrete structures.” PCI J. 16 (5): 22–52. https://doi.org/10.15554/pcij.09011971.22.52.
Chen, S., X. Song, and X. Liu. 2015. “Compressive strength degradation and evolution of failure surfaces in compressively preloaded concrete under freeze-thaw cycles.” Mater. Res. Innov. 19 (Jun): 433–437. https://doi.org/10.1179/1432891714Z.0000000001126.
Chou, J. S., C. K. Chiu, M. Farfoura, and I. Al-Taharwa. 2011. “Optimizing the prediction accuracy of concrete compressive strength based on a comparison of data-mining techniques.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 25 (3): 242–253. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000088.
Ding, S. F., C. Y. Su, and J. Z. Yu. 2011. “An optimizing BP neural network algorithm based on genetic algorithm.” Artif. Intell. Rev. 36 (2): 153–162. https://doi.org/10.1007/s10462-011-9208-z.
Gao, X. L., J. Li, and X. D. Ren. 2018. “Probabilistic model for long-term time-dependent compressive strength of concrete in existing buildings.” J. Perform. Constr. Facil. 32 (5): 4018074. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001217.
Grubbs, F. E. 1969. “Procedures for detecting outlying observations in samples.” Technometrics 11 (1): 1–21. https://doi.org/10.1080/00401706.1969.10490657.
Han, N., and W. Tian. 2018. “Experimental study on the dynamic mechanical properties of concrete under freeze-thaw cycles.” Struct. Concr. 19 (5): 1353–1362. https://doi.org/10.1002/suco.201700170.
Hashmi, A. F., M. Shariq, and A. Baqi. 2021. “An investigation into age-dependent strength, elastic modulus and deflection of low calcium fly ash concrete for sustainable construction.” Constr. Build. Mater. 283 (5): 122772. https://doi.org/10.1016/j.conbuildmat.2021.122772.
Jiang, Q., R. M. Huang, Y. H. Huang, S. J. Chen, Y. Q. He, L. Lan, and C. Liu. 2019. “Application of BP neural network based on genetic algorithm optimization in evaluation of power grid investment risk.” IEEE Access 7 (Sep): 154824–154835. https://doi.org/10.1109/ACCESS.2019.2944609.
Kee, C. F. 1971. “Relation between strength and maturity of concrete.” ACI Mater. J. 68 (3): 196–203. https://doi.org/10.14359/11320.
Krishna, D. A., R. S. Priyadarsini, and S. Narayanan. 2019. “Effect of elevated temperatures on the mechanical properties of concrete.” Procedia Struct. Integrity 14 (Jan): 384–394. https://doi.org/10.1016/j.prostr.2019.05.047.
Li, Z. Y., and Z. J. Wang. 2013. “Researches on concrete carbonation.” Appl. Mech. Mater. 357–360 (4): 737–742. https://doi.org/10.4028/www.scientific.net/AMM.357-360.737.
Liu, H., J. T. Yao, and D. T. Niu. 2009. “Durability evaluation and prediction of residual life for existing concrete structures under common atmosphere environment.” Build. Struct. 30 (9): 143–148. https://doi.org/10.3321/j.issn:1000-6869.2009.02.018.
Liu, R. D., Y. H. Zhang, and Z. W. Li. 2022. “Leakage diagnosis of air conditioning water system networks based on an improved BP neural network algorithm.” Buildings 12 (5): 610. https://doi.org/10.3390/buildings12050610.
Mckinnie, S. B. 2004. “Time dependent compressive strength and modulus of elasticity of Florida concrete.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Florida State Univ.
MHURDPRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 1974. Code for design of concrete structures. Beijing: MHURDPRC.
MHURDPRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2011. Technical specification for inspecting of concrete compressive strength by rebound method. Beijing: MHURDPRC.
MHURDPRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2015. Code for design of concrete structures. Beijing: MHURDPRC.
MHURDPRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2016. Technical specification for testing concrete strength with drilled core method. Beijing: MHURDPRC.
Niu, D. T. 2003. Durability and life forecast of reinforced concrete structure. Beijing: Science Press.
Niu, D. T., and Q. L. Wang. 1995. “Models of concrete strength changing with time in general air environment.” Ind. Constr. 25 (Jul): 36–38. https://doi.org/10.13204/j.gyjz1995.06.0070120080347.
O’Connor, J. P., J. M. Cutts, G. R. Yates, and C. A. Olson. 1997. “Evaluation of historic concrete structures.” Concr. Int. 19 (8): 57–61.
Promtep, K., P. Thiuthad, and N. Intaramo. 2022. “A comparison of efficiency of test statistics for detecting outliers in normal population.” Sains Malays. 51 (11): 3829–3842. https://doi.org/10.17576/jsm-2022-5111-26.
Scherbaum, F., E. Delavaud, and C. Riggelsen. 2009. “Model selection in seismic hazard analysis: An information-theoretic perspective.” Bull. Seismol. Soc. Am. 99 (6): 3234–3247. https://doi.org/10.1785/0120080347.
Shariq, M., J. Prasad, and A. Masood. 2010. “Effect of GGBFS on time dependent compressive strength of concrete.” Constr. Build. Mater. 24 (8): 1469–1478. https://doi.org/10.1016/j.conbuildmat.2010.01.007.
Topçu, I. B., and M. SarIdemir. 2008. “Prediction of compressive strength of concrete containing fly ash using artificial neural networks and fuzzy logic.” Comput. Mater. Sci. 41 (3): 305–311. https://doi.org/10.1016/j.commatsci.2007.04.009.
Wang, H. Q., M. Zhao, J. Li, and H. M. Ding. 2007. “Analysis and application of statistical data about concrete strength.” J. Tongji Univ. 35 (7): 861–865. https://doi.org/10.1016/S1672-6529(07)60007-9.
Wang, J., W. J. Zheng, Y. G. Zhao, and X. G. Zhang. 2020. “Prediction of concrete failure time based on statistical properties of compressive strength.” Appl. Sci. 10 (3): 815. https://doi.org/10.3390/app10030815.
Washa, G. W., J. C. Saemann, and S. M. Cramer. 1989. “Fifty-year properties of concrete made in 1937.” ACI Mater. J. 86 (4): 367–371. https://doi.org/10.14359/2139.
Washa, G. W., and K. F. Wendt. 1975. “Fifty year properties of concrete.” ACI Mater. J. 72 (1): 20–28. https://doi.org/10.1086/449927.
Withey, M. O. 1961. “Fifty year compression test of concrete.” ACI Mater. J. 58 (Aug): 695–712. https://doi.org/10.14359/8003.
Xie, J., X. M. Li, and H. H. Wu. 2014. “Experimental study on the axial-compression performance of concrete at cryogenic temperatures.” Constr. Build. Mater. 72 (Dec): 380–388. https://doi.org/10.1016/j.conbuildmat.2014.09.033.
Xu, T., and J. Li. 2018. “Assessing the spatial variability of the concrete by the rebound hammer test and compression test of drilled cores.” Constr. Build. Mater. 188 (10): 820–832. https://doi.org/10.1016/j.conbuildmat.2018.08.138.
Yang, S. H., H. D. Zhu, and Z. F. Xu. 2011. “Prediction of compressive strength of concrete using double-shear testing method.” J. Mater. Civ. Eng. 33 (1): 04020423. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003505.
Zarandi, F. M. H., I. B. Türksen, J. Sobhani, and A. A. Ramezanianpour. 2008. “Fuzzy polynomial neural networks for approximation of the compressive strength of concrete.” Appl. Soft Comput. 8 (1): 488–498. https://doi.org/10.1016/j.asoc.2007.02.010.
Zhang, F. C. 1982. “Measurement, analysis and assessment of concrete strength in existing buildings.” Ind. Constr. 2 (Aug): 37–45. https://doi.org/10.13204/j.gyjz198202008.
Zhang, S., and B. Zhao. 2013. “Research on the performance of concrete materials under the condition of freeze-thaw cycles.” Eur. J. Environ. Civ. Eng. 17 (9): 860–871. https://doi.org/10.1080/19648189.2013.826601.
Zhou, Y., B. Gencturk, K. Willam, and A. Attar. 2014. “Carbonation-induced and chloride-induced corrosion in reinforced concrete structures.” J. Mater. Civ. Eng. 27 (9): 4014245. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001209.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Feb 12, 2023
Accepted: May 24, 2023
Published online: Jul 12, 2023
Published in print: Sep 1, 2023
Discussion open until: Dec 12, 2023
ASCE Technical Topics:
- Buildings
- Compressive strength
- Data analysis
- Distribution functions
- Engineering fundamentals
- Existing buildings
- Field tests
- Material mechanics
- Material properties
- Materials engineering
- Mathematical functions
- Mathematics
- Methodology (by type)
- Probability
- Probability distribution
- Research methods (by type)
- Strength of materials
- Structural engineering
- Structures (by type)
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Soubhagya Karmakar, Siddhartha Ghosh, Saha Dauji, New Approach for Conditional Coring in RC Structures Using Bivariate Distributions of Nondestructive Test Results, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10.1061/AJRUA6.RUENG-1236, 10, 3, (2024).