Reliability-Based Structural Design of Retaining Walls Supporting Spatially Variable Soils
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 8, Issue 3
Abstract
The performance of retaining walls is affected by spatial variability in the properties of the retained backfill. In practice, the conventional approach for designing retaining walls is deterministic and is based on ensuring acceptable factors of safety for different limit states of wall failure. One exception is the design method in Eurocode 7, where partial load and resistance factors are recommended to ensure a target level of safety in the design. The main limitation of partial load and resistance factors is that the recommended partial safety factors may not realistically incorporate the impact of spatial variability of the backfill properties, because the calibration studies that were conducted to determine the safety factors were not based on realistic random field modeling of the soils involved. Another limitation is that existing geotechnical reliability-based design approaches for analyzing retaining walls focus on failure in the soil and do not include design aspects of the structural behavior of the wall itself. The main objective of this study is to quantify the probability of failure associated with the design of a cantilever retaining wall using approaches that are based on partial factors of safety (Eurocode 7). The objective is achieved by utilizing random fields that represent the variability in the backfill in the finite difference software FLAC 2D. The effect of the properties of the random field on the design of the retaining wall are investigated to provide recommendations that can aid in the design of cantilever walls supporting cohesionless backfill. Results indicate that the partial load factors recommended by Eurocode 7 may not meet safety requirements, particularly for high uncertainties in the backfill friction angle and for large vertical correlation lengths.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
References
Basma, A. A. 1991. “Safety and reliability of anchored bulkhead walls.” Struct. Saf. 10 (4): 283–295. https://doi.org/10.1016/0167-4730(91)90035-8.
BSI (British Standards Institution). 2004a. Eurocode 2: Design of concrete structures. General rules and rules for buildings. BS EN 1992–1–1:2004+A1:2014. London: BSI.
BSI (British Standards Institution). 2004b. Eurocode 7: Geotechnical design Part 1. BS EN 1997-1:2004 +A1: 2013. London: BSI.
Cami, B., S. Javankhoshdel, K.-K. Phoon, and J. Ching. 2020. “Scale of fluctuation for spatially varying soils: Estimation methods and values.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 6 (4): 03120002. https://doi.org/10.1061/AJRUA6.0001083.
Castillo, E., R. Mínguez, A. R. Terán, and A. Fernández-Canteli. 2004. “Design and sensitivity analysis using the probability-safety-factor method. An application to retaining walls.” Struct. Saf. 26 (2): 159–179. https://doi.org/10.1016/S0167-4730(03)00039-0.
Chalermyanont, T., and C. H. Benson. 2005. “Reliability-based design for external stability of mechanically stabilized earth walls.” Int. J. Geomech. 5 (3): 196–205. https://doi.org/10.1061/(ASCE)1532-3641(2005)5:3(196).
Chang, Y.-C., J. Ching, K.-K. Phoon, and Q. Yue. 2021. “On the hole effect in soil spatial variability.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 7 (4): 04021039. https://doi.org/10.1061/AJRUA6.0001168.
Daryani, K. E., and H. Mohamad. 2014. “System reliability-based analysis of cantilever retaining walls embedded in granular soils.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 8 (3): 192–201. https://doi.org/10.1080/17499518.2014.937583.
Dasgupta, U. S., V. B. Chauhan, and S. M. Dasaka. 2017. “Influence of spatially random soil on lateral thrust and failure surface in earth retaining walls.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 11 (3): 247–256. https://doi.org/10.1080/17499518.2016.1266665.
Dodagoudar, G., S. Sayed, and K. Rajagopal. 2015. “Random field modeling of reinforced retaining walls.” Int. J. Geotech. Eng. 9 (3): 229–238. https://doi.org/10.1179/1939787914Y.0000000055.
Ellingwood, B. 1980. Development of a probability based load criterion for American National Standard A58. 1980 ed. Washington, DC: Dept. of Commerce.
Fenton, G. A., D. V. Griffiths, and M. B. Williams. 2007. “Reliability of traditional retaining wall design.” In Risk and variability in geotechnical engineering, 165–172. London: Thomas Telford.
Goh, A. T., K. K. Phoon, and F. H. Kulhawy. 2009. “Reliability analysis of partial safety factor design method for cantilever retaining walls in granular soils.” J. Geotech. Geoenviron. Eng. 135 (5): 616–622. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000061.
Griffiths, D. V., G. A. Fenton, and H. R. Ziemann. 2008. “Reliability of passive earth pressure.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 2 (2): 113–121. https://doi.org/10.1080/17499510802178640.
GuhaRay, A., S. Ghosh, and D. K. Baidya. 2014. “Risk factor based design of cantilever retaining walls.” Geotech. Geol. Eng. 32 (1): 179–189. https://doi.org/10.1007/s10706-013-9702-y.
Itasca Consulting Group, Inc. 2016. FLAC—Fast lagrangian analysis of continua, ver. 8.0 theory and background. Minneapolis: Itasca.
Le, T. M. H., M. Sánchez, D. Gallipoli, and S. Wheeler. 2015. “Probabilistic modelling of auto-correlation characteristics of heterogeneous slopes.” Geomech. Geoeng. 10 (2): 95–108. https://doi.org/10.1080/17486025.2014.933890.
Liu, Z., C. H. Juang, and S. Atamturktur. 2013. “Confidence level-based robust design of cantilever retaining walls in sand.” Comput. Geotech. 52 (Jul): 16–27. https://doi.org/10.1016/j.compgeo.2013.03.001.
Nowak, A. S., and K. R. Collins. 2000. Reliability of structures: Civil engineering series. Singapore: McGraw-Hill.
Phoon, K.-K., and F. H. Kulhawy. 1999. “Characterization of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/t99-038.
Phoon, K.-K., and C. Tang. 2019. “Characterisation of geotechnical model uncertainty.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 13 (2): 101–130. https://doi.org/10.1080/17499518.2019.1585545.
Prästings, A., J. Spross, R. Müller, S. Larsson, W. Bjureland, and F. Johansson. 2017. “Implementing the extended multivariate approach in design with partial factors for a retaining wall in clay.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 3 (4): 04017015. https://doi.org/10.1061/AJRUA6.0000918.
Sayed, S., G. R. Dodagoudar, and K. Rajagopal. 2010. “Finite element reliability analysis of reinforced retaining walls.” Geomech. Geoeng. 5 (3): 187–197. https://doi.org/10.1080/17486020903576788.
Sert, S., Z. Luo, J. Xiao, W. Gong, and C. H. Juang. 2016. “Probabilistic analysis of responses of cantilever wall-supported excavations in sands considering vertical spatial variability.” Comput. Geotech. 75 (May): 182–191. https://doi.org/10.1016/j.compgeo.2016.02.004.
Sivakumar Babu, G. L., and B. M. Basha. 2008. “Optimum design of cantilever retaining walls using target reliability approach.” Int. J. Geomech. 8 (4): 240–252. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:4(240).
Sujith, M., D. Menon, and G. Dodagoudar. 2011. “Reliability analysis and design of cantilever RC retaining walls against sliding failure.” Int. J. Geotech. Eng. 5 (2): 131–141. https://doi.org/10.3328/IJGE.2011.05.02.131-141.
Tang, Y. G. 2011. “Probabilistic analysis of the deflection of retaining walls in deep excavation.” In Proc., Geo-Risk 2011: Risk Assessment and Management, 963–970. Reston, VA: ASCE.
Wang, H., H. Chen, Y. Wang, L. Han, and H. Li. 2020. “Reliability analysis for stability of the gravity retaining wall under mountain torrent.” Syst. Sci. Control Eng. 8 (1): 434–440. https://doi.org/10.1080/21642583.2020.1790439.
Zevgolis, I. E., and P. L. Bourdeau. 2010. “System reliability analysis of the external stability of reinforced soil structures.” Georisk: Assess. Manage. Risk Eng. Syst. Geohazards 4 (3): 148–156. https://doi.org/10.1080/17499511003630496.
Zhang, D.-B., Z.-B. Sun, and C.-Q. Zhu. 2013. “Reliability analysis of retaining walls with multiple failure modes.” J. Cent. South Univ. 20 (10): 2879–2886. https://doi.org/10.1007/s11771-013-1809-z.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 24, 2021
Accepted: Feb 12, 2022
Published online: May 17, 2022
Published in print: Sep 1, 2022
Discussion open until: Oct 17, 2022
ASCE Technical Topics:
- Backfills
- Business management
- Construction engineering
- Construction methods
- Design (by type)
- Engineering fundamentals
- Excavation
- Field tests
- Geomechanics
- Geometry
- Geotechnical engineering
- Load and resistance factor design
- Load factors
- Mathematics
- Practice and Profession
- Public administration
- Public health and safety
- Retaining structures
- Safety
- Soil mechanics
- Soil properties
- Spatial variability
- Structural design
- Structural reliability
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Zengle Li, Huimei Zhang, Bin Zhi, Xin Li, Shiguan Chen, Research on New Greenable Class Gravity Retaining Wall Structure Technology Based on Video Monitoring, Applied Sciences, 10.3390/app132112066, 13, 21, (12066), (2023).