Placement Test, Porosity, and Randomness of Cube and Cubipod Armor Layers
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 140, Issue 5
Abstract
Although little attention is usually given to the armor porosity and armor randomness of randomly placed concrete armor units in mound breakwaters, significant model effects may occur if armor porosity and randomness are different for prototype and small-scale models. Armor randomness and porosity are easier to control in small-scale models because they are generally constructed by hand in dry and perfect viewing conditions; equipment and environmental constraints make control at prototype scale more difficult. Results from three-dimensional small-scale placement tests are analyzed when cube and Cubipod units are placed with a small-scale crawler crane and pressure clamps. Armor porosity was not workable below 37% for cubes and 35% for Cubipods; placement grids were obtained for feasible armor porosities, considering row settlements during construction as well. A methodology to measure armor randomness using high-precision laser scanning, similar to terrestrial LIDAR, was tested with small-scale cube and Cubipod armor. Three armor randomness indexes (ARIs) measured the randomness of cube and Cubipod armor; the values for ARIs were higher for Cubipod armor than for cube armor.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial support received from the CDTI (CUBIPOD and CLIOMAR Projects), SATO-OHL Group (CLIOMAR Project), and the Spanish Ministry of Economy and Competitiveness (Grant BIA2012-33967). The third author was financially supported through the FPU program (Formación del Profesorado Universitario) funded by the Spanish Ministry of Education (Ministerio de Educación, Cultura y Deporte). The authors thank Tomás J. Pérez for assisting with the 3D placement tests and processing the laser-scanner data, and Debra Westall for revising the manuscript.
References
Burcharth, H. F., Maciñeira, E., and Canalejo, P. (2002). “Model testing and reliability evaluation of the new deepwater breakwater at la Coruña, Spain.” Proc., 28th Int. Conf. on Coastal Engineering, World Scientific, Singapore, 1581–1593.
CIRIA, CUR, and CETMEF. (2007). The rock manual: The use of rock in hydraulic engineering (2nd edition), C683, CIRIA, London.
Dupray, S., and Roberts, J. (2009). “Review of the use of concrete in the manufacture of concrete armour units.” Proc., Int. Conf. of Coasts, Marine Structures and Breakwaters, Vol. 1, Institution of Civil Engineers (ICE), London, 245–259.
Frens, A. B. (2007). “The impact of placement method on Antifer-block stability.” M.S. thesis, Delft Univ. of Technology, Delft, Netherlands.
Gürer, S., Çevik, E., Yüksel, Y., and Günbak, A. R. (2005). “Stability of tetrapod breakwaters for different placing methods.” J. Coast. Res., 21(3), 464–471.
Hudson, R. Y., et al. (1979). “Coastal hydraulic models.” Special Rep. No. 5, U.S. Army Corps of Engineers, U.S. Army Coastal Engineering Research Center, Vicksburg, MS.
Medina, J. R., Gómez-Martín, M. E., and Corredor, A. (2010). “Influence of armor unit placement on armor porosity and hydraulic stability.” Proc., 32nd Int. Conf. on Coastal Engineering, Coastal Engineering Research Council, ASCE, Reston, VA.
Medina, J. R., Gómez-Martín, M. E., and Corredor, A. (2011). “Armor unit placement, randomness and porosity of cube and Cubipod armor layers.” Proc., 6th Int. Conf. Coastal Structures 2011, Vol. 2, World Scientific, Singapore, 743–754.
Muttray, M., Reedijk, J., Vos-Rovers, I., and Bakker, P. (2005). “Placement and structural strength of Xbloc and other single layer armour units.” Proc., Int. Conf. on Coastlines, Structures and Breakwaters 2005, Institution of Civil Engineers (ICE), Thomas Telford, London, 556–568.
Oever, E., Verhagen, H., Klabbers, M., and Reedijk, B. (2006). “Theoretical and experimental study on the placement of Xbloc armour units.” Proc., 30th Int. Conf. on Coastal Engineering, World Scientific, Singapore, 4841–4848.
Özkan-Çevik, E., Cihan, K., and Yüksel, Y. (2005). “Stability for structures armored with Core-Loc.” Turkish J. Eng. Environ. Sci., 29(4), 225–233.
Pardo, V., Herrera, M. P., Molines, J., and Medina, J. R. (2012). “Placement grids, porosity and randomness of armor layers.” Proc., 33rd Int. Conf. on Coastal Engineering, Coastal Engineering Research Council, ASCE, Reston, VA.
Pardo, V., Molines, J., and Medina, J. R. (2010). “Experimental analysis of the influence of armor unit placement method on armor porosity.” Proc., 3rd Int. Conf. on the Application of Physical Modelling to Port and Coastal Protection, Departament d'Enginyeria Hidràulica, Marítima i Ambiental, Universitat Politècnica de Catalunya, Barcelona, Spain, 25.1–25.10.
Turk, G. F., and Melby, J. A. (1997). “Core-Loc concrete armor units: Technical guidelines.” Misc. Paper CHL-97-6, U.S. Army Engineer Waterways Experiment Station, Coastal and Hydraulics Laboratory, Vicksburg, MS.
U.S. Army Corps of Engineers (USACE). (1984). Shore protection manual, U.S. Army Engineer Waterways Experiment Station, Coastal and Hydraulics Laboratory, Vicksburg, MS.
VandenBosch, A., d’Angremond, K., Verhagen, H., and Olthof, J. (2002). “Influence of the density of placement on the stability of armour layers on breakwaters.” Proc., 28th Int. Conf. on Coastal Engineering, World Scientific, Singapore, 1537–1549.
Van der Meer, J. (1999). “Design of concrete armour layers.” Proc., Int. Conf. on Coastal Structures, ASCE, Reston, VA, 213–221.
Verhagen, H. J., d’Angremond, K., and Van der Vliet, K. (2002). “Positioning of cubes on a breakwater slope.” Proc., 28th Int. Conf. on Coastal Engineering, World Scientific, Singapore, 1550–1560.
Yagci, O., and Kapdasli, S. (2003). “Alternative placement technique for antifer blocks used on breakwaters.” Ocean Eng., 30(11), 1433–1451.
Yagci, O., Kapdasli, S., and Cigizoglu, H. K. (2004). “The stability of the antifer units used on breakwaters in case of irregular placement.” Ocean Eng., 31(8–9), 1111–1127.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 4, 2012
Accepted: Nov 22, 2013
Published online: Nov 25, 2013
Discussion open until: Aug 5, 2014
Published in print: Sep 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.