RBF-DQ Solution for Shallow Water Equations
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 139, Issue 1
Abstract
A mesh-free and highly convergent radial basis function–based differential quadrature method (RBF-DQ) is implemented to simulate shallow water waves in the marine environment and open channels. RBF-DQ is applicable in waterways of regular or irregular geometries for the simulation of currents and tidal waves. The multiquadric (MQ)-type radial basis function is used for the purpose of this study. MQ radial basis function has one or two shape parameters whose values significantly affect the accuracy of the results. To find appropriate values of the shape parameters, a parameter estimation methodology is introduced based on cross validation. The accuracy of RBF-DQ is evaluated by two idealized numerical examples along with a field application for the Oresund Strait located between Sweden and Denmark. In each case, either analytical, numerical solutions from other software programs or measured data were taken as benchmark solutions. Results of this study show that RBF-DQ, unlike conventional polynomial-based DQ, can be applied to irregular domains for tidal wave simulation. The method has two main advantages; first, it is mesh free and does not need mesh generation; second, with many fewer nodes, the results obtained compared well with analytical and benchmark solutions of other numerical schemes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge Professor Simon Neill from the Center for Oceanography for providing POLCOMS results.
References
Arakawa, A. (1972). “Design of the UCLA general circulation model.” Tech. Rep. 7, Univ. of California, Los Angeles.
Bert, C. W., and Malik, M. (1996). “Differential quadrature method in computational mechanics: A review.” Appl. Mech. Rev., 49(1), 1–28.
Burden, R. L., and Faires, J. D. (1989). Numerical analysis, PWS-KENT Publishing, Boston.
Chaudhry, M. H. (2008). Open-channel flow, Prentice Hall, Englewood Cliffs, NJ.
Danish Hydraulic Institute (DHI). (2005a). “M21HD scientific documentation.” MIKE21 flow model manual, hydrodynamic module, DHI, Horsholm, Denmark.
Danish Hydraulic Institute (DHI). (2005b). “Step-by-step training guide.” MIKE21 flow model manual, hydrodynamic module, DHI, Horsholm, Denmark.
Dutch, S. (2005). “Converting UTM to latitude and longitude (or vice versa).” ீhttp://www.uwgb.edu/dutchs/UsefulData/UTMFormulas.htm〉 (Dec. 25, 2008).
Fasshauer, G. E., and Zhang, J. G. (2007). “On choosing “optimal” shape parameters for RBF approximation.” Numer. Algorithms, 45(1), 345–368.
Franke, R. (1982). “Scattered data interpolation: Test of some methods.” Math. Comput., 38(157), 181–200.
Hardy, R. L. (1978). “The application of multiquadric equations and point mass anomaly models to crustal movement studies.” Technical Rep. NOS-76-NGS-11, U.S. Department of Commerce, National Oceanic and Atmospheric Administration, National Ocean Survey, Rockville, MD.
Hashemi, M. R. (2006). “Numerical modeling of tidal waves and open channel flow using differential quadrature method.” Ph.D. thesis, Dept. of Civil Eng., School of Engineering, Shiraz Univ., Shiraz, Iran.
Hashemi, M. R., Abedini, M. J., and Malekzadeh, P. (2006). “Numerical modeling of long waves in shallow water using incremental differential quadrature method.” Ocean Eng., 33(13), 1749–1764.
Hashemi, M. R., Abedini, M. J., Neill, S. P., and Malekzadeh, P. (2008). “Tidal and surge modeling using differential quadrature: A case study in the Bristol Channel.” Coast. Eng., 55(10), 811–819.
Holt, J. T., and James, I. D. (2001). “An s coordinate density evolving model of the northwest European continental shelf: 1. Model description and density structure.” J. Geophys. Res., 106(C7), 14015–14034.
Hon, Y. C., Cheung, K. F., Mao, X. Z., and Kansa, E. J. (1999). “Multiquadric solution for shallow water equations.” J. Hydraul. Eng., 125(5), 524–533.
Kansa, E. J. (1990). “Multiquadrics—A scattered data approximation scheme with applications to computational fluid-dynamics—II.” Comput. Math. Appl., 19(8–9), 147–161.
Khoshfetrat, A., and Abedini, M. J. (2012). “A hybrid DQ/LMQRBF-DQ approach for numerical solution of Poisson-type and Burger’s equations in irregular domain.” Appl. Math. Model., 36(5), 1885–1901.
Larsson, E., and Fornberg, B. (2003). “A numerical study of some radial basis function based solution methods for elliptic PDEs.” Comput. Math. Appl., 46(5–6), 891–902.
Larsson, E., and Fornberg, B. (2005). “Theoretical and computational aspects of multivariate interpolation with increasingly flat radial basis functions.” Comput. Math. Appl., 49(1), 103–130.
Meenal, M., and Eldho, T. I. (2011). “Simulation of groundwater flow in unconfined aquifer using meshfree point collocation method.” Eng. Anal. Bound. Elem., 35(4), 700–707.
MIKE21 [Computer software]. Horsholm, Denmark, Danish Hydraulic Institute (DHI).
Rippa, S. (1999). “An algorithm for selecting a good value for the parameter c in radial basis function interpolation.” Adv. Comput. Math., 11(2–3), 193–210.
Sarler, B., and Vertnik, R. (2006). “Meshfree explicit local radial basis function collocation method for diffusion problems.” Comput. Math. Appl., 51(8), 1269–1282.
Shu, C., Ding, H., and Yeo, K. S. (2003). “Local radial basis function-based differential quadrature method and its application to solve two-dimensional incompressible Navier-Stokes equations.” Comput. Method. Appl. M., 192(7–8), 941–954.
Shu, C., Ding, H., and Yeo, K. S. (2004). “Solution of partial differential equations by a global radial basis function–based differential quadrature method.” Eng. Anal. Bound. Elem., 28(10), 1217–1226.
Shu, C., Shan, Y. Y., and Qin, N. (2007). “Development of a local MQ-DQ-based stencil adaptive method and its application to solve incompressible Navier–Stokes equations.” Int. J. Numer. Methods Fluids, 55(4), 367–386.
Tarwater, A. E. (1985). “A parameter study of Hardy’s multiquadric method for scattered data interpolation.” Technical Rep. No. UCRL-54670, Lawrence Livermore National Laboratory, Livermore, CA.
Trahan, C. J., and Wyatt, R. E. (2003). “Radial basis function interpolation in the quantum trajectory method: Optimization of the multi-quadric shape parameter.” J. Comput. Phys., 185(1), 27–49.
Wang, J. G., and Liu, G. R. (2002). “On the optimal shape parameters of radial basis functions used for 2-D meshless methods.” Comput. Method. Appl. M, 191(23–24), 2611–2630.
Wu, Y. L., and Shu, C. (2002). “Development of RBF-DQ method for derivative approximation and its application to simulate natural convection in concentric annuli.” Comput. Mech., 29(6), 477–485.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 26, 2010
Accepted: May 23, 2012
Published online: May 26, 2012
Published in print: Jan 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.