Hydrodynamic Characteristics of a Free-Surface Semicircular Breakwater Exposed to Irregular Waves
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 138, Issue 2
Abstract
A free-surface semicircular breakwater (SCB) has been developed for protecting coastal and marine infrastructures against ocean waves. The hydrodynamic characteristics of the breakwater are investigated in irregular seas through an experimental program. A test model of the semicircular breakwater has been constructed with front wall porosity varied at 0 (i.e., no perforations), 9, 18, and 27%. The wave surface elevations are measured at different locations upstream and downstream of the models, and the coefficients of wave transmission, reflection, and energy dissipation are evaluated. Wave climate in the vicinity of the breakwater models and horizontal wave force on them are also measured. On the basis of the measured data, empirical models are proposed to provide design formulas for wave transmission, wave reflection, and horizontal wave force. The proposed empirical models show good agreement with the measured data; however, sensible engineering judgment must be taken while using these because the equations proposed are based on small-scale laboratory tests. The overall results indicate that the impermeable SCB model is an effective wave reflector, and the permeable SCB models are good energy dissipaters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the Institute for Energy Systems of School of Engineering, University of Edinburgh. The authors would also like to thank Universiti Teknologi PETRONAS (Malaysia) for providing scholarship for this study.
References
Brossard, J., Jarno-Druaux, A., Marin, F., and Tabet-Aoul, E. H. (2003). “Fixed absorbing semi-immersed breakwater.” Coastal Eng., 49(1–2), 25–41.
Burcharth, H. F., and Hughes, S. A. (2003). “Fundamentals of design.” Coastal engineering manual, U.S. Army Corps of Engineers, Washington, DC.
Chakrabarti, S. K. (1994). Offshore structure modelling, World Scientific, Singapore.
Goda, Y. (2010). Random seas and design of maritime structures, World Scientific, Singapore.
Gűnaydın, K., and Kebdaşlı, M. S. (2004). “Performance of solid and perforated U-type breakwaters under regular and irregular waves.” Ocean Eng., 31(11–12), 1377–1405.
Gűnaydın, K., and Kebdaşlı, M. S. (2007). “Investigation of Π-type breakwater performance under regular and irregular waves.” Ocean Eng., 34(7), 1028–1043.
Hsiao, S. S., Fang, H. M., Chang, C. M., and Lee, T. S. (2008). “Experimental study of the wave energy dissipation due to the porous-piled structure.” Proc., 18th Int. Offshore and Polar Engineering Conf., International Society of Offshore and Polar Engineers, Cupertino, CA, 592–598.
Hsu, H. H., and Wu, Y. C. (1999). “Scattering of water wave by a submerged horizontal plate and a submerged permeable breakwater.” Ocean Eng., 26(4), 325–341.
Hu, H., Wang, K. H., and Williams, A. N. (2002). “Wave motion over a breakwater system of a horizontal plate and a vertical porous wall.” Ocean Eng., 29(4), 373–386.
Hughes, S. A. (1993). Physical models and laboratory techniques in coastal engineering, World Scientific, Singapore.
Koftis, T., and Prinos, P. (2005). “On the hydrodynamic efficiency of floating breakwaters.” Arabian Coast Conf., Dubai.
Koutandos, E. V. (2007). “Hydrodynamic analysis of a skirt breakwater.” Proc. ICE Maritime Eng., 160(3), 121–133.
Koutandos, E., and Prinos, P. (2005). “Design formulae for wave transmission behind floating breakwaters.” IAHR XXXI Congress, International Association for Hydraulic Research, Madrid, Spain, 4081–4089.
Koutandos, E. V., and Prinos, P. E. (2011). “Hydrodynamic characteristics of semi-immersed breakwater with an attached porous plate.” Ocean Eng., 38(1), 34–48.
Li, D., Panchang, V., Tang, Z., Demirbilek, Z., and Ramsden, J. (2005). “Evaluation of an approximate method for incorporating floating docks in harbor wave prediction models.” Can. J. Civ. Eng., 32(6), 1082–1092.
Liu, Y., Li, Y. C., Teng, B., and Dong, S. (2008). “Wave motion over a submerged breakwater with an upper horizontal porous plate and a lower horizontal solid plate.” Ocean Eng., 35(16), 1588–1596.
Mansard, E. P. D., and Funke, E. R. (1980). “The measurement of incident and reflected spectra using a least squares method.” Proc., 17th Int. Conf. on Coastal Engineering, ASCE, New York, 154–172.
Neelamani, S., and Gayathri (2006). “Wave interaction with twin plate wave barrier.” Ocean Eng., 33(3–4), 495–516.
Neelamani, S., and Rajendran, R. (2002a). “Wave interaction with T-type breakwaters.” Ocean Eng., 29(2), 151–175.
Neelamani, S., and Rajendran, R. (2002b). “Wave interaction with ‘⊥’-type breakwaters.” Ocean Eng., 29(5), 561–589.
Neelamani, S., and Vedagiri, M. (2002). “Wave interaction with partially immersed twin vertical barriers.” Ocean Eng., 29(2), 215–238.
Rageh, O. S., and Koraim, A. S. (2010). “Hydraulic performance of vertical walls with horizontal slots used as breakwater.” Coastal Eng., 57(8), 745–756.
Rao, S., Shirlal, K. G., Varghese, R. V., and Govindaraja, K. R. (2009). “Physical model studies on wave transmission of a submerged inclined plate breakwater.” Ocean Eng., 36(15–16), 1199–1207.
Sundar, V., and Subbarao, B. V. V. (2003). “Hydrodynamic performance characteristics of quadrant front-face pile-supported breakwater.” J. Waterway, Port, Coastal, Ocean Eng., 129(1), 22–33.
Takahashi, S., Kotake, Y., Jujiwara, R., and Osobe, M. (2002). “Performance evaluation of perforated-wall caisson by VOF numerical simulations.” Proc., 28th Int. Conf. on Coastal Engineering, World Scientific, Singapore, 1364–1376.
Teh, H. M., Venugopal, V., and Bruce, T. (2010). “Hydrodynamic performance of a free surface semicircular perforated breakwater.” Proc., 32nd Int. Conf. on Coastal Engineering, Coastal Engineering Research Council.
Teh, H. M., Venugopal, V., and Bruce, T. (2011). “Performance analysis of a semicircular free surface breakwater.” Proc., 30th Int. Conf. on Ocean, Offshore and Arctic Engineering, ASME, Houston.
Wang, Y., Wang, G., and Li, G. (2006). “Experimental study on the performance of the multiple-layer breakwater.” Ocean Eng., 33(13), 1829–1839.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Apr 8, 2011
Accepted: Jul 21, 2011
Published online: Jul 25, 2011
Published in print: Mar 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.