Diffraction of Water Waves by a Semisubmerged Structure in a Channel
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 137, Issue 6
Abstract
A theoretical approach is applied to describe the diffraction of water waves by a structure in a channel of arbitrary configuration. The solution was achieved by applying the three-dimensional (3D) boundary element method and is valid for a structure of arbitrary shape. The derived model was applied to analyze the effect of the structure geometry and the configuration of the channel on diffracted wave field and on generalized wave-load components. The results show that the wave field in the channel and wave loads on a structure strongly depend on wavelength and the geometry of the structure. The far-field wave amplitudes and wave load components oscillate with increasing wave number, and for selected wave frequencies, the incoming waves are fully transmitted and forces on the structure simultaneously vanish. This result is of practical importance. The oscillations depend primarily on the length of the structure and are associated with the formation of partially standing waves in the subdomain along the structure, which affect wave reflection in the main channel and wave loads on the structure. The effect of the draft and width of the structure on the oscillations is very limited. However, the draft and width of a structure has a substantial effect on the magnitude of wave reflection and transmission, especially for narrow channels. Moreover, the draft and width of a structure has a substantial effect on wave-load components. The analysis of the results indicates that it is difficult to simplify a theoretical description because, even for a channel of a constant depth and ideal vertical walls, once a structure is present in the channel, the problem needs to be described by 3D formulation, which complicates the solution. Theoretical results are in reasonable agreement with experimental data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The author is grateful to Prof. R. Silva of UNAM for providing him with the opportunity to complete this study in the warm hospitality of his institution. Moreover, the author is indebted to Dr. M. Paprota and Dr. A. Reda from IH PAS and the reviewers for constructive comments.
References
Bingham, H. B. (2000). “A hybrid Boussinesq-panel method for predicting the motion of a moored ship.” Coastal Eng., 40(1), 21–28.
Johansson, M. (1989). “Barrier-type breakwaters.” Ph.D. thesis, Chalmers Univ. of Technology, Gothenburg, Sweden.
Jolas, P. (1962). “Contribution à l’étude des oscillations périodique des liquides pésants avec surface libre.” La Houille blanche, 16(6), 758–769.
Kellog, O. D. (1929). Foundations of potential theory, Frederick Ungar, New York.
Li, D., Panchang, V. G., Zhaoxiang, T., Demirbilek, Z., and Ramsden, J. (2005). “Evaluation of an approximate method for incorporating floating docks in two-dimensional harbor wave prediction models.” Can. J. Civ. Eng., 32(6), 1082–1092.
Melo, E., and Guza, T. (1991). “Wave propagation in jetted entrance channels. I: Models.” J. Waterway, Port, Coastal, Ocean Eng., 117(5), 471–492.
Newman, J. N. (1990). “Second-harmonic wave diffraction at large depths.” J. Fluid Mech., 213, 59–70.
Ohyama, T., and Tsuchida, M. (1997). “Expanded mild-slope equations for the analysis of wave-induced ship motions in a harbour.” Coastal Eng., 30(1-2), 77–103.
Panchang, V., Zhang, J., and Demirbilek, Z. (2008). “Incorporating rubble mound jetties in elliptic harbor wave model.” J. Waterway, Port, Coastal, Ocean Eng., 134(1), 40–52.
Sawaragi, T. (1995). Coastal engineering—waves, beaches, wave-structure interactions, Elsevier, Netherlands.
Sternberg, W. (1926). Die randwertaufgaben der potentialtheorie, Berlin und Leipzig.
Sulisz, W. (1986). “Solving a boundary problem for the Poisson differential equation by the boundary element method.” Rozprawy Hydrotechniczne, 48, 133–146, (in Polish).
Sulisz, W. (2003). “Numerical modeling of wave absorbers for physical wave tanks.” J. Waterway, Port, Coastal, Ocean Eng., 129(1), 5–14.
Sulisz, W. (2005). “Wave propagation in channel with side porous caves.” J. Waterway, Port, Coastal, Ocean Eng., 131(4), 162–170.
Sulisz, W. (2008). “Reflected and transmitted waves in a channel with side porous mattresses.” Coastal Eng., 55(5), 391–399.
Sulisz, W., and Hudspeth, R. T. (1993). “Complete second-order solution for water waves generated in wave flumes.” J. Fluids Struct., 7(3), 253–268.
Takagi, K., Naito, S., and Hirota, K. (1993). “Hydrodynamic forces acting on a floating body in a harbour of arbitrary geometry.” Proc., 3rd Int. Offshore and Polar Eng. Conf. III, Int. Society of Offshore and Polar Engineers, Mountain View, CA, 192–199.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Feb 18, 2010
Accepted: Apr 28, 2011
Published online: Oct 14, 2011
Published in print: Nov 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.