Eco-Layouts in Water Distribution Systems
Publication: Journal of Water Resources Planning and Management
Volume 145, Issue 1
Abstract
To achieve maximum efficiency in water pressurized transport, it is necessary to perform a global analysis, whenever possible starting from the system’s conception. The first stage of the process is the network layout, the main topic of this paper. The optimum topology from an energy point of view (or eco-layout) is the one that, insofar as is feasible, allows equalizing the network’s pressure to the set pressure standards. Eco-layouts can be easily designed in new systems but are difficult to implement, mainly in the short term, in operating networks. Nevertheless, because no system is eternal, the required actions can be gradually implemented. Therefore, the main goal of this paper is to identify and discuss these guidelines and actions, some of which are apparently contradictory to current design criteria, whereas others endorse modern management trends. These strategies can be summarized in two points: (1) providing lower pressure to consumers saves energy, and (2) setting up smaller pressure zones in terms of the elevation steps between zones will enable water companies to supply water at lower pressure in hilly areas. In the end, networks with more-efficient layouts can achieve important energy savings.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the valuable contributions made by the reviewers of this paper, because their comments and suggestions helped to significantly improve the contents. Additionally, the authors thank Omnium Ibérico/Aguas de Valencia for partially funding this research, and particularly its Energy Efficiency Department for providing some real case studies which inspired some of the examples included in this paper.
References
Batchabani, E., and M. Fuamba. 2012. “Optimal tank design in water distribution networks: Review of literature and perspectives.” J. Water Resour. Plann. Manage. 140 (2): 136–145. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000256.
Bhave, P. R., and C. F. Lam. 1983. “Optimal layout for branching distribution networks.” J. Transp. Eng. 109 (4): 534–547. https://doi.org/10.1061/(ASCE)0733-947X(1983)109:4(534).
Cabrera, E., E. Gómez, E. Cabrera, Jr., J. Soriano, and V. Espert. 2014. “Energy assessment of pressurized water systems.” J. Water Resour. Plann. Manage. 141 (8): 04014095. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000494.
Cabrera, E., E. Gómez, V. Espert, and E. Cabrera, Jr. 2017. “Strategies to improve the energy efficiency of pressurized water systems.” Proc. Eng. 186: 294–302. https://doi.org/10.1016/j.proeng.2017.03.248.
Cabrera, E., M. A. Pardo, R. Cobacho, and E. Cabrera, Jr. 2010. “Energy audit of water networks.” J. Water Resour. Plann. Manage. 136 (6): 669–677. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000077.
Corominas, J. 2010. “Agua y energía en el riego en la época de la Sostenibilidad.” Ingeniería del Agua. 17 (3): 219–233. https://doi.org/10.4995/ia.2010.2977.
EC (European Communities). 2011. The European eco-management and audit scheme. Improving your environmental and business performance. Brussels, Belgium: EC.
EEFIG (Energy Efficiency Financial Institutions Group). 2015. “Energy Efficiency—The first fuel for the EU Economy. How to drive new finance for energy efficiency investments.” Accessed April 20, 2018. http://www.unepfi.org/fileadmin/documents/EnergyEfficiencyInvestment.pdf.
EP (European Parliament). 2009. “Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products.” Off. J. European Union.
Fontana, N., M. Giugni, and D. Portolano. 2012. “Losses reduction and energy production in water distribution networks.” J. Water Resour. Plann. Manage. 138 (3): 237–244. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000179.
Ghimire, S. R., and B. D. Barkdoll. 2010. “Sensitivity analysis of municipal drinking water distribution system energy use to system properties.” Urban Water J. 7 (4): 217–232. https://doi.org/10.1080/1573062X.2010.484501.
Ghorbanian, V., B. W. Karney, and Y. Guo. 2016. “Pressure standards in water distribution systems: Reflection on current practice with consideration of some unresolved issues.” J. Water Resour. Plann. Manage. 142 (8): 04016023. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000665.
GIZ (Deutsche Gesellschaft für Internationale Zusammenarbeit). 2011. Guidelines for water loss reduction. A focus on pressure management. Eschborn, Germany: GIZ.
Gómez, E., E. Cabrera, M. Balaguer, and J. Soriano. 2015. “Direct and indirect water supply: An energy assessment.” Proc. Eng. 119: 1088–1097. https://doi.org/10.1016/j.proeng.2015.08.941.
HI & Europump (Hydraulic Institute & Europump). 2001. Pump life cycle costs. A guide to LCC analysis for pumping systems. Parsippany, NJ: Hydraulic Institute & Europump.
ISO. 2011. Environmental management systems: Guidelines for incorporating ecodesign. ISO14006:2011. Geneva: ISO.
Jeong, G., A. Wicaksono, and D. Kang. 2017. “Revisiting the resilience index for water distribution networks.” J. Water Resour. Plann. Manage. 143 (8): 04017035. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000792.
Laucelli, D. B., A. Simone, L. Berardi, and O. Giustolisi. 2017. “Optimal design of district metering areas for the reduction of leakages.” J. Water Resour. Plann. Manage. 143 (6): 04017017. https://doi.org/10.1061/(ASCE)WR.1943-5452.0000768.
Pelli, T., and H. U. Hitz. 2000. “Energy indicators and savings in water supply.” J. Am. Water Works Assoc. 92 (6): 55–62. https://doi.org/10.1002/j.1551-8833.2000.tb08959.x.
Price, E., and A. Ostfeld. 2014. “Discrete pump scheduling and leakage control using linear programming for optimal operation of water distribution systems.” J. Hydraul. Eng. 140 (6): 04014017. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000864.
SSWD (Sacramento Suburban Water District). 2011. Reservoir and booster pump station asset management plan. Sacramento, CA: SSWD.
SV (Sustainability Victoria). 2009. Energy efficiency best practice guide pumping systems. Melbourne, Australia: State Government Victoria.
Swamee, P. K., and A. K. Sharma. 2008. Design of water supply pipe networks. New York: Wiley.
Todini, E. 2000. “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water 2 (2): 115–122. https://doi.org/10.1016/S1462-0758(00)00049-2.
Van Zyl, J. E., O. Piller, and Y. le Gat. 2008. “Sizing municipal storage tanks based on reliability criteria.” J. Water Resour. Plann. Manage. 134 (6): 548–555. https://doi.org/10.1061/(ASCE)0733-9496(2008)134:6(548).
Walski, T. M., et al. 1987. “Battle of the network models: Epilogue.” J. Water Resour. Plann. Manage. 113 (2): 191–203. https://doi.org/10.1061/(ASCE)0733-9496(1987)113:2(191).
Walski, T. M. 2000. “Hydraulic design of water distribution storage tanks.” In Water distribution systems handbook, edited by L. Mays, 10.1–10.20. New York: McGraw-Hill.
WW (Water in the West). 2013. Water and energy nexus: A literature review. Stanford, CA: Stanford Univ.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Oct 18, 2017
Accepted: Jul 17, 2018
Published online: Nov 14, 2018
Published in print: Jan 1, 2019
Discussion open until: Apr 14, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.