Industry Effluent Disposal into Rivers: Coupled Multiobjective-Analytical Optimization Model
Publication: Journal of Water Resources Planning and Management
Volume 144, Issue 2
Abstract
In this work, a linear system theory approach produces an analytical solution of contaminant mass transport equations for its subsequent use in multiobjective optimization for optimal waste allocation for a hypothetical multireach, multiwaste source river. The solution scheme used provided contaminant concentrations at the chosen checkpoint at any time, thus allowing for a solution to the optimization problem using a conventional mathematical iterative search method (sequential quadratic programming). The study conceptually investigates the effects of different input waste loads on the optimization with cost and equity objectives. The results suggest that in some cases, equity measure does not protect dischargers downstream, but rather balances all the dischargers with the most restricted dischargers. Moreover, 25–43% fuller utilization of the river’s assimilative capacity can be achieved by rearranging input waste loads between the discharges even in comparison with eliminating the most restricted waste sources.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the joint Israeli Office of the Chief Scientist (OCS) Ministry of Science, Technology and Space (MOST), and by the Germany Federal Ministry of Education and Research (BMBF), under project no. 02WA1298.
References
Babu, M. T., Das, V. K., and Vethamony, P. (2006). “BOD-DO modeling and water quality analysis of a waste water outfall off Kochi, west coast of India.” Environ. Int., 32(2), 165–173.
Brown, L. C., and Barnwell, T. O. (1987). The enhanced stream water quality models QUAL2E and QUAL2E-UNCAS: Documentation and user manual, U.S. Environmental Protection Agency, Washington, DC.
Burn, D. H., and Yulianti, J. S. (2001). “Waste-load allocation using genetic algorithms.” J. Water Resour. Plann. Manage., 121–129.
Chapra, S. C., and Pelletier, G. J. (2003). QUAL2K: A modeling framework for simulating river and stream water quality: Documentation and users manual, Dept. of Civil and Environmental Engineering, Tufts Univ., Medford, MA.
de Andrade, L. N., Mauri, G. R., and Mendonça, A. S. F. (2013). “General multiobjective model and simulated annealing algorithm for waste-load allocation.” J. Water Resour. Plann. Manage., 339–344.
Fang, X. B., Zhang, J. Y., Mei, C. X., and Wong, M. H. (2014). “The assimilative capacity of Qiantang River watershed, China.” Water Environ. J., 28(2), 192–202.
Farhadian, M., Haddad, O. B., Seifollahi-Aghmiuni, S., and Loáiciga, H. A. (2015). “Assimilative capacity and flow dilution for water quality protection in rivers.” J. Hazardous Toxic Radioactive Waste, 04014027.
Gembicki, F. W. (1974). “Vector optimization for control with performance and parameter sensitivity indices.” Ph.D. dissertation, Case Western Reserve Univ., Cleveland.
Genuchten, M. T., Leij, F. J., Skaggs, T. H., Toride, N., Bradford, S. A., and Pontedeiro, E. M. (2013). “Exact analytical solutions for contaminant transport in rivers. 1: The equilibrium advection-dispersion equation.” J. Hydrol. Hydromech., 61(2), 146–160.
Kerachian, R., and Karamouz, M. (2007). “A stochastic conflict resolution model for water quality management in reservoir-river systems.” Adv. Water Resour., 30(4), 866–882.
Liu, C. C. (1996). “Linear systems theory and modeling of river water quality.” J. Chin. Inst. Environ. Eng., 6(1), 51–58.
MATLAB [Computer software]. MathWorks, Natick, MA.
McDonnell, A. J., and Wright, R. M. (1979). “In-stream deoxygenation rate prediction.” J. Environ. Eng. Div., 105(2), 323–335.
McQuivey, R. S., and Keefer, T. N. (1974). “Simple method for predicting dispersion in streams.” J. Environ. Eng. Div., 100(4), 997–1011.
Murty Yandamuri, S. R., Bhallamudi, S. M., and Srinivasan, K. (2006a). “Non-uniform flow effect on optimal waste load allocation in rivers.” Water Resour. Manage., 20(4), 509–530.
Murty Yandamuri, S. R., Srinivasan, K., and Murty Bhallamudi, S. (2006b). “Multiobjective optimal waste load allocation models for rivers using nondominated sorting genetic algorithm-II.” J. Water Resour. Plann. Manage., 133–143.
Nocedal, J., and Wright, S. J. (2006). Sequential quadratic programming, Springer, New York.
O’Connor, D. J., and Dobbins, W. E. (1958). “Mechanism of reaeration in natural streams.” Trans. Am. Soc. Civ. Eng., 123(2934), 641–667.
Sasikumar, K., and Mujumdar, P. P. (1998). “Fuzzy optimization model for water quality management of a river system.” J. Water Resour. Plann. Manage., 79–88.
Thomann, R. V., and Mueller, J. A. (1987). Principles of surface water quality modeling and control, Harper & Row, New York.
Tung, Y. K., and Hathhorn, W. E. (1989). “Multiple-objective waste load allocation.” Water Resour. Manage., 3(2), 129–140.
Warren, I. R., and Bach, H. (1992). “MIKE 21: A modelling system for estuaries, coastal waters and seas.” Environ. Software, 7(4), 229–240.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Feb 7, 2017
Accepted: Jul 11, 2017
Published online: Nov 23, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.