Local Sensitivity of Pressure-Driven Modeling and Demand-Driven Modeling Steady-State Solutions to Variations in Parameters
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Water Resources Planning and Management
Volume 143, Issue 2
Abstract
The first-order sensitivity matrices (matrices of sensitivity or influence coefficients) have application in many areas of water distribution system analysis. Finite-difference approximations, automatic differentiation, sensitivity equations, and the adjoint method have been used in the past to estimate sensitivity. In this paper new, explicit formulas for the first-order sensitivities of water distribution system (WDS) steady-state heads and flows to changes in demands, resistance factors, roughnesses, relative roughnesses, and diameters are presented. The formulas cover both pressure-dependent modeling (PDM) and demand-dependent modeling (DDM) problems in which either the Hazen-Williams or the Darcy-Weisbach head-loss models are used. Two important applications of sensitivity matrices, namely calibration and sensor placement, are discussed and illustrative examples of the use of sensitivity matrices in those applications are given. The use of sensitivity matrices in first-order confidence estimation is briefly discussed. The superior stability of the PDM formulation over DDM is established by the examination of the sensitivity matrices for the same network solved by both model paradigms. The sensitivity matrices and the key matrices in both the global gradient method for DDM problems and its counterpart for PDM problems have many elements in common. This means that the sensitivity matrices can be computed at marginal cost during the solution process with either of these methods.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented in this paper is part of the French–German collaborative research project ResiWater that is funded by the French National Research Agency (ANR; Project ANR-14-PICS-0003) and the German Federal Ministry of Education and Research (BMBF; Project BMBF-13N13690).
References
Bargiela, A., and Hainsworth, G. (1989). “Pressure and flow uncertainty in water systems.” J. Water Resour. Plann. Manage., 212–229.
Bruneau, M., et al. (2003). “A framework to quantitatively assess and enhance the seismic resilience of communities.” EERI Spectra J., 19(4), 733–752.
Bush, C., and Uber, J. (1998). “Sampling design methods for water distribution model calibration.” J. Water Resour. Plann. Manage., 334–344.
Cheng, W., and He, Z. (2011). “Calibration of nodal demand in water distribution systems.” J. Water. Resour. Plann. Manage., 31–40.
Cheung, P., Piller, O., and Propato, M. (2005). “Optimal location of water quality sensors in supply systems by multiobjective genetic algorithms.” 8th Int. Conf. on Computing and Control in the Water Industry CCWI05, Vol. 1/2, Centre for Water Systems, Exeter, U.K., 203–208.
de Schaetzen, W. B. F. (2000). “Optimal calibration and sampling design for hydraulic network models.” Ph.D. thesis, School in Engineering and Computing Science, Univ. of Exeter, Exeter, U.K.
Deuerlein, J. (2002). “On the hydraulic system analysis of water supply networks.” Ph.D. thesis, Dept. of Civil Engineering, Geo- and Environmental Sciences, Univ. of Karlsruhe, Karlsruhe, Germany (in German).
Dunlop, E. (1991). “WADI users manual.” Local Government Computer Services Board, Dublin, Ireland.
Elhay, S., Piller, O., Deuerlein, J., and Simpson, A. (2016). “A robust, rapidly convergent method that solves the water distribution equations for pressure dependent models.” J. Water Resour. Plann. Manage., .
Elhay, S., Simpson, A., Deuerlein, J., Alexander, B., and Schilders, W. (2014). “A reformulated co-tree flows method competitive with the global gradient algorithm for solving the water distribution system equations.” J. Water Resour. Plann. Manage., .
Fabrie, P., Gancel, G., Mortazavi, I., and Piller, O. (2010). “Quality modeling of water distribution systems using sensitivity equations.” J. Hydraul. Eng., 34–44.
Gancel, G. (2006). “Modeling inverse problem for water quality distribution in pipe network.” Ph.D. thesis, School in Applied Mathematics, Univ. of Bordeaux, Bordeaux, France (in French).
Gratton, S., Lawless, A., and Nichols, N. (2007). “Approximate Gauss Newton methods for nonlinear least squares problems.” SIAM J. Optim., 18(1), 106–132.
Kang, D., and Lansey, K. (2010). “Optimal meter placement for water distribution system state estimation.” J. Water Resour. Plann. Manage., 337–347.
Kapelan, Z. (2002). “Calibration of water distribution system hydraulic models.” Ph.D. thesis, Univ. of Exeter, Exeter, U.K.
Lansey, K. (2012). “Sustainable, robust, resilient, water distribution systems.” WDSA 2012: 14th Water Distribution Systems Analysis Conf., Adelaide, SA, Australia, 1–18.
Lapebie, E., Werey, C., Rulleau, B., Deuerlein, J., Sedehizade, F., and Piller, O. (2015). “Vulnerability analyses applied to water distribution networks.” Int. Water Association, LESAM 2015, Yokohama, Japan.
Piller, O. (1995). “Modeling the behavior of a network—Hydraulic analysis and a sampling procedure for estimating the parameters.” Ph.D. thesis, Univ. of Bordeaux, Bordeaux, France (in French).
Piller, O., Brémond, B., and Morel, P. (1999). “A spatial sampling procedure for physical diagnosis in a drinking water supply network.” Int. Conf. on Computing and Control for the Water Industry CCWI’99, Vol. 1/2, Research Studies Press Ltd., Exeter, U.K., 309–316.
Piller, O., Gilbert, D., and van Zyl, J. (2011). “Dual calibration for coupled flow and transport models of water distribution systems.” Water distribution systems analysis 2010, ASCE, Reston, VA.
Sanz, G., and Perez, R. (2014). “Parameterization and sampling design for water distribution networks demand calibration using the singular value decomposition: Application to a real network.” Int. Conf. on Hydroinformatics, CUNY Academic Works, New York.
Sanz, G., and Perez, R. (2015). “Sensitivity analysis for sampling design and demand calibration in water distribution networks using the singular value decomposition.” J. Water. Resour. Plann. Manage., .
Swamee, P., and Jain, A. (1976). “Explicit equations for pipe flow problems.” J. Hydraul. Div., 102(5), 657–664.
Todini, E., and Pilati, S. (1988). A gradient algorithm for the analysis of pipe networks, Wiley, London.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Feb 9, 2016
Accepted: Aug 16, 2016
Published online: Oct 17, 2016
Published in print: Feb 1, 2017
Discussion open until: Mar 17, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.