Generalized Resilience and Failure Indices for Use with Pressure-Driven Modeling and Leakage
Publication: Journal of Water Resources Planning and Management
Volume 142, Issue 8
Abstract
In 2000, the resilience and failure indices were introduced as a convenient and compact tool to express respectively water-distribution network (WDN) surplus and deficit in satisfying users’ demand, in terms of delivered power. In their original formulation, the mentioned indices, originally thought as WDN design tools, were developed only considering the demand-driven modeling approach, which would include pumps but not leakage. This paper extends the formulation of both indices and presents a generalized expression, more convenient for use when dealing with pressure-driven modeling and capable of including the effect of leakage. Following the original concept, the generalized indices were developed by calculating the power dissipated in the network as a function of the difference between the total power inserted through source nodes and pumps and the net delivered power, whereas the leakage-related power is considered as a loss similarly to the internally dissipated one. Applications to WDN analysis and design proved that using the new formulation in the presence of leakage and pressure-dependent consumptions yields better description of the delivered power excess, compared to the original demand-driven formulation and to another pressure-driven formulation present in the scientific literature.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alperovits, E., and Shamir, U. (1977). “Design of optimal water distribution systems.” Water Resour. Res., 13(6), 885–900.
Alvisi, S., and Franchini, M. (2006). “Near-optimal rehabilitation scheduling of water distribution systems based on a multi-objective genetic algorithm.” Civ. Eng. Environ. Syst., 23(3), 143–160.
Atkinson, S., Farmani, R., Memon, F., and Butler, D. (2014). “Reliability indicators for water distribution system design: Comparison.” J. Water Resour. Plann. Manage., 160–168.
Ciaponi, C. (2009). “Performance analysis in water supply.” Performance indicators for the planning, design and management of water supply systems, C. Ciaponi, ed., CSDU, Milano, Italy, 1–29.
Cimellaro, G., Tinebra, A., Renschler, C., and Fragiadakis, M. (2015). “New resilience index for urban water distribution networks.” J. Struct. Eng., C4015014.
Creaco, E., and Franchini, M. (2012). “Fast network multi-objective design algorithm combined with an a posteriori procedure for reliability evaluation under various operational scenarios.” Urban Water J., 9(6), 385–399.
Creaco, E., Franchini, M., and Alvisi, S. (2012). “Evaluating water demand shortfalls in segment analysis.” Water Resour. Manage., 26(8), 2301–2321.
Creaco, E., Franchini, M., and Todini, E. (2016). “The combined use of resilience and loop diameter uniformity as a good indirect measure of network reliability.” Urban Water J., 13(2), 167–181.
Creaco, E., Franchini, M., and Walski, T. (2014). “Accounting for phasing of construction within the design of water distribution networks.” J. Water Resour. Plann. Manage., 598–606.
Creaco, E., and Pezzinga, G. (2015a). “Embedding linear programming in multi objective genetic algorithms for reducing the size of the search space with application to leakage minimization in water distribution networks.” Environ. Modell. Software, 69, 308–318.
Creaco, E., and Pezzinga, G. (2015b). “Multi-objective optimization of pipe replacements and control valve installations for leakage attenuation in water distribution networks.” J. Water Resour. Plann. Manage., 04014059-1-10.
Deb, K., Agrawal, S., Pratapm, A., and Meyarivan, T. (2002). “A fast and elitist multi-objective genetic algorithm: NSGA-II.” IEEE Trans. Evol. Comput., 6(2), 182–197.
Gargano, R., and Pianese, D. (2000). “Reliability as tool for hydraulic network planning.” J. Hydraul. Eng., 354–364.
Germanopoulos, G. (1985). “A technical note on the inclusion of pressure dependent demand and leakage terms in water supply network models.” Civ. Eng. Syst., 2(3), 171–179.
Gessler, J., and Walski, T. M. (1985). “Water distribution system optimization.”, U.S. Army Corps of Engineers’ Waterways Experimentation Station, Vicksburg, MS.
Giustolisi, O., Kapelan, Z., and Savic, D. A. (2008a). “An algorithm for automatic detection of topological changes in water distribution networks.” J. Hydraul. Eng., 435–446.
Giustolisi, O., Savic, D., and Kapelan, Z. (2008b). “Pressure-driven demand and leakage simulation for water distribution networks.” J. Hydraul. Eng., 626–635.
Gupta, R., and Bhave, P. (1996). “Comparison of methods for predicting deficient-network performance.” J. Water Resour. Plann. Manage., 214–217.
Mays, L. W. (1996). “Review of reliability analysis of water distribution systems.” Stochastic hydraulics ‘96, Balkema, Rotterdam, Netherlands, 53–62.
Pandit, A., and Crittenden, J. C. (2012). “Index of network resilience (INR) for urban water distribution systems.” Proc., 2012 Critical Infrastructure Symp., Arlington, VA.
Pezzinga, G., and Pititto, G. (2005). “Combined optimization of pipes and control valves in water distribution networks.” J. Hydraul. Res., 43(6), 668–677.
Prasad, T. D., Sung-Hoon, H., and Namsik, P. (2003). “Reliability based design of water distribution networks using multiobjective genetic algorithms.” KSCE J. Civ. Eng., 7(3), 351–361.
Raad, D. N., Sinske, A. N., and van Vuuren, J. H. (2010). “Comparison of four reliability surrogate measures for water distribution systems design.” Water Resour. Res., 46(5), W05524.
Reddy, L. S., and Elango, K. (1989). “Analysis of water distribution networks with head dependent outlets.” Civ. Eng. Syst., 6(3), 102–110.
Saldarriaga, J. G., Ochoa, S., Moreno, M. E., Romero, N., and Cortés, O. J. (2010). “Prioritised rehabilitation of water distribution networks using dissipated power concept to reduce non-revenue water.” Urban Water J., 7(2), 121–140.
Tanyimboh, T. T., Tabesh, M., and Burrows, R. (2001). “Appraisal of source head methods for calculating reliability of water distribution network.” J. Water Resour. Plann. Manage., 206–213.
Todini, E. (2000). “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water, 2(2), 115–122.
Todini, E., and Pilati, S. (1988). “A gradient algorithm for the analysis of pipe networks.” Computer applications in water supply, B. Coulbeck, and C.-H. Orr, eds., Wiley, New York, 1–20.
Tucciarelli, T., Criminisi, A., and Termini, D. (1999). “Leak analysis in pipeline systems by means of optimal valve regulation.” J. Hydraul. Eng., 277–285.
Van Zyl, J. E., and Cassa, A. M. (2014). “Modeling elastically deforming leaks in water distribution pipes.” J. Hydraul. Eng., 182–189.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: Simulation methods.” J. Water Resour. Plann. Manage., 276–294.
Walski, M., Chase, D., Savic, D., Grayman, W., Beckwith, S., and Koelle, E. (2003). Advanced water distribution modelling and management, Haestad, Waterbury, CT.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 21, 2015
Accepted: Jan 7, 2016
Published online: Mar 30, 2016
Published in print: Aug 1, 2016
Discussion open until: Aug 30, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.