Inversion Model of Water Distribution Systems for Nodal Demand Calibration
Publication: Journal of Water Resources Planning and Management
Volume 141, Issue 9
Abstract
Nodal demand calibration of a water distribution system (WDS) is a process of adjusting the nodal demand in WDS models to make its predictions consisting with measurements, which is an inversion problem compared to the conventional forward computation. Most existing methods rely on performing forward computation repeatedly to calculate the sensitivity matrix or generate offspring for searching for optimal solutions. This paper develops an alternative framework, namely an inversion model, to directly calibrate the nodal demand. The model is constructed by separating the known and unknown variables in continuity and energy equations of WDS using the matrix decomposition method. Specifically, the measured and unmeasured nodal demand, nodal head, and pipe flow are taken as knows and unknowns, respectively. The nodal demands with similar user characteristics are grouped (i.e., aggregated) to make the model overdetermined, and the Gauss-Newton based iteration method is applied to solve the model. To evaluate the calibration results when observation errors are involved, the standard deviations of unknowns are calculated using first-order second-moment method for uncertainty quantification, and the results are verified by Monte Carlo simulation. A simple network is used to illustrate the model construction in detail, and two numerical case studies, including a real highly looped network, are applied to further validate its effectiveness and feasibility. Encouraging results obtained clearly demonstrate the proposed method has potential for practical application in real-time nodal demand calibration, state estimation, and uncertainty quantification of WDSs.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the editor and anonymous reviewers for the helpful comments on the paper. This work supported by “The national science and technology plan project of the 12th five-year of China (2012BAJ25B06)”.
References
Aksela, K., and Aksela, M. (2011). “Demand estimation with automated meter reading in a distribution network.” J. Water Resour. Plann. Manage., 456–467.
Alvisi, S., and Franchini, M. (2010). “Pipe roughness calibration in water distribution systems using grey numbers.” J. Hydroinform., 12(4), 424–445.
Bhave, P. R. (1988). “Calibrating water distribution network models.” J. Environ. Eng., 120–136.
Boulos, P. F., and Wood, D. J. (1990). “Explicit calculation of pipe network parameters.” J. Hydraul. Eng., 1329–1344.
Boulos, P. F., and Wood, D. J. (1991). “An explicit algorithm for calculating operating parameters for water networks.” Civ. Eng. Syst., 8(2), 115–122.
Cheng, W., and He, Z. (2011). “Calibration of nodal demand in water distribution systems.” J. Water Resour. Plann. Manage., 31–40.
Clark, C., and Wu, Z. Y. (2006). “Integrated hydraulic model and genetic algorithm optimization for informed analysis of a real water system.” Proc., 8th Annual Water Distribution Systems Analysis Symp. (CD-ROM), ASCE, Reston, VA.
Datta, R. S. N., and Sridharan, K. (1994). “Parameter estimation in water distribution systems by least squares.” J. Water Resour. Plann. Manage., 405–422.
de Schaetzen, W. B. F. (2000). “Optimal calibration and sampling design for hydraulic network models.” Ph.D. thesis, Univ. of Exeter, Exeter, U.K.
Dini, M., and Tabesh, M. (2014). “A new method for simultaneous calibration of demand pattern and Hazen-Williams coefficients in water distribution systems.” Water Resour. Manage., 28(7), 2021–2034.
Elhay, S., and Simpson, A. (2011). “Dealing with zero flows in solving the nonlinear equations for water distribution systems.” J. Hydraul. Eng., 1216–1224.
EPANET [Computer software]. Washington, DC, U.S. EPA.
Ferreri, G. B., Napoli, E., and Tumbiolo, A. (1994). “Calibration of roughness in water distribution networks.” Proc., 2nd Int. Conf. on Water Pipeline Systems, BHR Group, Edinburgh, U.K., 379–396.
Giustolisi, O., and Berardi, L. (2011). “Water distribution network calibration using enhanced GGA and topological analysis.” J. Hydroinform., 13(4), 621–641.
Greco, M., and Del Guidice, G. (1999). “New approach to water distribution network calibration.” J. Hydraul. Eng., 849–854.
Jung, D., and Lansey, K. (2014). “Water distribution system burst detection using a nonlinear Kalman filter.” J. Water Resour. Plann. Manage., 04014070.
Kang, D., and Lansey, K. (2009). “Real-time demand estimation and confidence limit analysis for water distribution systems.” J. Hydraul. Eng., 825–837.
Kang, D., and Lansey, K. (2011). “Demand and roughness estimation in water distribution systems.” J. Water Resour. Plann. Manage., 20–30.
Kang, D., and Lansey, K. (2014). “Novel approach to detecting pipe bursts in water distribution networks.” J. Water Resour. Plann. Manage., 121–127.
Kang, D. S., Pasha, M. F. K., and Lansey, K. (2009). “Approximate methods for uncertainty analysis of water distribution systems.” Urban Water J., 6(3), 233–249.
Kapelan, Z. (2002). “Calibration of WDS hydraulic models.” Ph.D. thesis, Univ. of Exeter, Exeter, U.K.
Kapelan, Z., Savic, D. A., and Walters, G. A. (2007). “Calibration of WDS hydraulic models using the Bayesian recursive procedure.” J. Hydraul. Eng., 927–936.
Lansey, K. E., and Basnet, C. (1991). “Parameter estimation for water distribution networks.” J. Water Resour. Plann. Manage., 126–144.
Lansey, K. E., El-Shorbagy, W., Ahmed, I., Araujo, J., and Haan, C. T. (2001). “Calibration assessment and data collection for water distribution networks.” J. Hydraul. Eng., 270–279.
Laucelli, D., and Giustolisi, O. (2014). “Vulnerability assessment of water distribution networks under seismic actions.” J. Water Resour. Plann. Manage., 04014082.
Magini, R., Pallavicini, I., and Guercio, R. (2008). “Spatial and temporal scaling properties of water demand.” J. Water Resour. Plann. Manage., 276–284.
Mallick, K. N., Ahmed, I., Tickle, K. S., and Lansey, K. E. (2002). “Determining pipe groupings for water distribution networks.” J. Water Resour. Plann. Manage., 130–139.
Méndez, M., Araya, J. A., and Sanchez, L. D. (2013). “Automated parameter optimization of a water distribution system.” J. Hydroinform., 15(1), 71–85.
Moughton, L. J., Buchberger, S. G., Boccelli, D. L., Filion, Y. R., and Karney, B. W. (2006). “Effect of time step and data aggregation on cross correlation of residential demands.” 8th Annual Water Distribution Systems Analysis Symp., ASCE, Reston, VA.
Ormsbee, L. E. (1989). “Implicit network calibration.” J. Water Resour. Plann. Manage., 243–257.
Ormsbee, L. E., and Wood, D. J. (1986). “Explicit pipe network calibration.” J. Water Resour. Plann. Manage., 166–182.
Ostfeld, A., et al. (2012). “Battle of the water calibration networks.” J. Water Resour. Plann. Manage., 523–532.
Piller, O. (1995). “Modeling the behavior of a network-Hydraulic analysis and sampling procedures for parameter estimation.” Ph.D. thesis, Univ. of Bordeaux, Talence, France.
Piller, O., Gilbert, D., and Van Zyl, J. E. (2010). “Dual calibration for coupled flow and transport models of water distribution systems.” Water Distribution Systems Analysis 2010, ASCE, Reston, VA, 722–731.
Preis, A., Whittle, A., and Ostfeld, A. (2009). “Online hydraulic state prediction for water distribution systems.” World Environmental and Water Resources Congress 2009, ASCE, Reston, VA, 323–345.
Rahal, C. M., Sterling, M. J. H., and Coulbeck, B. (1980). “Parameter tuning for simulation models of water distribution networks.” Proc. Inst. Civ. Eng., Part 2. Res. Theory, 69(2), 751–762.
Reddy, P. V. N., Sridharan, K., and Rao, P. V. (1996). “WLS method for parameter estimation in water distribution networks.” J. Water Resour. Plann. Manage., 157–164.
Savic, D. A., Kapelan, Z. S., and Jonkergouw, P. M. (2009). “Quo vadis water distribution model calibration?” Urban Water J., 6(1), 3–22.
Savic, D. A., and Walters, G. A. (1995). “Genetic algorithm techniques for calibrating network models.”, Centre for Systems and Control Engineering, Univ. of Exeter, Exeter, U.K.
Shang, F., Uber, J., van Bloemen Waanders, B., Boccelli, D., and Janke, R. (2008). “Real time water demand estimation in water distribution system.” Proc., 8th Annual Water Distribution Systems Analysis Symp. 2006, ASCE, Reston, VA, 1–14.
Tao, T., Huang, H., Li, F., and Xin, K. (2014). “Burst detection using an artificial immune network in water-distribution systems.” J. Water Resour. Plann. Manage., 04014027.
Todini, E., and Pilati, S. (1988). “A gradient method for the solution of looped pipe networks.” Computer applications in water supply, B. Coulbeck and C. H. Orr, eds., Vol. 1, Wiley, London, 1–20.
Todini, E., and Rossman, L. A. (2013). “Unified framework for deriving simultaneous equation algorithms for water distribution networks.” J. Hydraul. Eng., 511–526.
Vertommen, I., Magini, R., and da Conceição Cunha, M. (2014). “Scaling water consumption statistics.” J. Water Resour. Plann. Manage., 04014072.
Walski, T. M. (1983). “Technique for calibrating network models.” J. Water Resour. Plann. Manage., 360–372.
Walski, T. M. (1986). “Case study: Pipe network model calibration issues.” J. Water Resour. Plann. Manage., 238–249.
Walski, T. M., Defrank, N., Voglino, T., Wood, R., and Whitman, E. (2006). “Determining the accuracy of automated calibration of pipe network models.” 8th Annual Water Distribution Systems Analysis Symp. (CD-ROM), ASCE, Reston, VA.
Wu, Z. Y., Walski, T. M., Mankowski, R., Herrin, G., Gurrieri, R., and Tryby, M. (2002). “Calibrating water distribution models via genetic algorithms.” Proc., AWWA Information Management Technology Conf., American Water Works Association (AWWA), Denver.
Xu, C., and Goulter, I. C. (1998). “Probabilistic model for water distribution reliability.” J. Water Resour. Plann. Manage., 218–228.
Yang, X., and Boccelli, D. (2014). “Bayesian approach for real-time probabilistic contamination source identification.” J. Water Resour. Plann. Manage., 04014019.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: May 14, 2014
Accepted: Dec 2, 2014
Published online: Jan 9, 2015
Discussion open until: Jun 9, 2015
Published in print: Sep 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.