Optimal Location of PRVs and Turbines in Water Distribution Systems
Publication: Journal of Water Resources Planning and Management
Volume 140, Issue 9
Abstract
Pressure reducing valves (PRVs) are often used to manage pressure and reduce losses in water distribution systems (WDS). Different approaches are available in the literature on how to locate and set the PRVs in order to maximize their effectiveness and minimize water losses. The available methodologies minimize the mean square difference between the actual and the target pressure at each node. Since the excess head can be used also to generate hydropower by using turbines and/or pumps as turbines (PATs), a different objective function could be suggested to maximize energy production. Consequently, a comprehensive analysis will be developed in the paper which highlights the differences between the preexisting approach and the suggested one, in terms of device location, pressure reduction, and recoverable energy. Numerical simulations showed that minimizing pressure may also affect the production of energy, while maximizing the energy production itself could be an attractive alternative, leading to higher generation and only a slight increase of the average node pressure.
Get full access to this article
View all available purchase options and get full access to this article.
References
Araujo, L. S., Ramos, H., and Coelho, S. T. (2006). “Pressure control for leakage minimisation in water distribution systems management.” Water Resour. Manage., 20(1), 133–149.
Campisano, A., Modica, C., and Vetrano, L. (2012). “Calibration of proportional controllers for the RTC of pressures to reduce leakage in water distribution networks.” J. Water Resour. Plann. Manage., 377–384.
Charbonneau, P., and Knapp, B. (1995). A user’s guide to PIKAIA 1.0, National Center for Atmospheric Research (NCAR) Technical Note, Boulder, CO.
Colombo, A., and Kleiner, Y. (2011). “Energy recovery in water distribution systems using microturbines.” Probabilistic methodologies in water and wastewater engineering (in honour of Prof. Barry Adams, Univ. of Toronto), NRC Construction, 1–9.
Colombo, A. F., and Karney, B. W. (2003). “The labyrinth of water distribution systems: demand, energy and climate change.” PEDS 2003—Pumps, electromechanical devices and systems applied to urban water management, Taylor and Francis, Leiden.
Comitato per la vigilanza sull'uso delle risorse idriche (Co.N.Vi.Ri.). (2010). “Relazione annuale al Parlamento sullo stato dei servizi idrici.” Ministero dell’Ambiente e della Tutela del Territorio e del Mare, Rome, Italy (in Italian).
Corcoran, L., McNabola, A., and Coughlan, P. (2012). “Energy recovery potential of the Dublin region water supply network.” IWA World Congress on Water, Climate and Energy, International Water Association (IWA).
European Environment Agency (EEA). (2001). “Sustainable water use in Europe—Part 2: Demand management.”, Copenhagen.
Fontana, N., Giugni, M., and Portolano, D. (2012). “Energy production policy in water distribution networks.” J. Water Resour. Plann. Manage., 237–244.
Giugni, M., Fontana, N., and Portolano, D. (2009). “Energy saving policy in water distribution networks.” Renew. Energy Power Qual. J., 7, 1–6.
Giugni, M., Fontana, N., Romanelli, D., and Portolano, D. (2007). “Strategic planning optimization of ‘Napoli Est’ water distribution system.” Proc. XXXII Congress of IAHR, International Association of Hydraulic Research.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Addison-Wesley Publishing, Reading, PA.
Goldberg, D. E. (1994). “Genetic and evolutionary algorithms come of age.” Commun. ACM, 37(3), 113–119.
Islam, M. S., and Babel, M. S. (2013). “Economic analysis of leakage in the Bangkok water distribution system.” J. Water Resour. Plann. Manage., 209–216.
Jowitt, P. W., and Xu, C. (1990). “Optimal valve control in water distribution networks.” J. Water Resour. Plann. Manage., 455–472.
Khadam, M. A., Shammas, N. K., and Al Feraiheedi, Y. (1991). “Water losses from municipal utilities and their impacts.” Water Int., 16(4), 254–261.
Lambert, A. O. (2002). “International report: Water losses management and techniques.” Water Sci. Technol.: Water Supply, 2(4), 1–20.
Liberatore, S., and Sechi, G. M. (2009). “Location and calibration of valves in water distribution networks using a scatter-search meta-heuristic approach.” Water Resour. Manage., 23(8), 1479–1495.
McNabola, A., Coughlan, P., and Williams, A. P. (2011). “The technical and economic feasibility of energy recovery in water supply networks.” Int. Conf. on Renewable Energy and Power Quality (ICREPQ 2011), European Association for the Development of Renewable Energies, Environment and Power Quality (EA4EPQ).
Mutikanga, H. E., Sharma, S. K., and Vairavamoorthy, K. (2013). “Methods and tools for managing losses in water distribution systems.” J. Water Resour. Plann. Manage., 166–174.
Nicolini, M., Giacomello, C., and Deb, K. (2011). “Calibration and optimal leakage management for a real water distribution network.” J. Water Resour. Plann. Manage., 134–142.
Nicolini, M., and Zovatto, L. (2009). “Optimal location and control of pressure reducing valves in water networks.” J. Water Resour. Plann. Manage., 178–187.
Pernice, M., and Walker, H. F. (1998). “NITSOL: A Newton iterative solver for nonlinear systems.” J. Sci. Comput., 19(1), 302–318.
Tucciarelli, T., Criminisi, A., and Termini, D. (1999). “Leak analysis in pipeline systems by means of optimal valve regulation.” J. Hydraul. Eng., 277–285.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 12, 2012
Accepted: Oct 17, 2013
Published online: Oct 21, 2013
Published in print: Sep 1, 2014
Discussion open until: Sep 23, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.