Optimal Tank Design in Water Distribution Networks: Review of Literature and Perspectives
Publication: Journal of Water Resources Planning and Management
Volume 140, Issue 2
Abstract
Water distribution networks (WDN) are traditionally designed without integrating tanks in the optimization process, despite the numerous benefits tanks bring to network operation. Since 2004, a number of efforts have been made to integrate tanks, and especially consideration of tank sizing, in optimization models for WDN, but important limitations in these models have impeded their adoption. This paper reviews different approaches to including tank consideration in WDN optimization, and examines the gap between proposed models and current engineering practice. It then analyzes the strengths and weaknesses of these models and suggests a procedure for selecting the most suitable approach to real-world WDN optimization projects. Further research is proposed to improve the validity and applicability of models to decision makers and policymakers.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alperovits, E., and Shamir, U. (1977). “Design of optimal water distribution systems.” Water Resour. Res., 13(6), 885–900.
Aly, A. H., and Wanakule, N. (2004). “Short-term forecasting for urban water consumption.” J. Water Resour. Plann. Manage., 405–410.
American Water Works Association (AWWA). (2008). “Distribution system requirements for fire protection—Manual of water supply practices.” M31, 4th Ed., Denver, CO.
Brière, F. (2007). Drinking-water distribution, sewage, and rainfall collection, Presses inter Polytechnique, Montréal, QC.
Cohon, J. L. (2004). Multiobjective programming and planning, Dover Publications, New York.
da Conceicao Cunha, M., and Sousa, J. (1999). “Water distribution network design optimization: Simulated annealing approach.” J. Water Resour. Plann. Manage., 215–221.
Damelin, E., Shamir, U., and Arad, N. (1972). “Engineering and economic evaluation of the reliability of water supply.” Water Resour. Res., 8(4), 861–877.
De Neufville, R., Schaake, J., Stafford, J. H. (1971). “Systems analysis of water distribution networks.” J. Sanit. Eng. Div., 97(6), 825–842.
Djebedjian, B., Herrick, A., Rayan, M. A. (2000). “An investigation of the optimization of potable water network.” 5th Int. Water Technology Conf. IWTC 2000, Alexandria, Egypt.
Doby, T. A., and Kumar, S. V., Baugh, J. W., Brill, E. D., and Ranjithan, S. R. (2004). “Genetic algorithm search for least cost design of looped pipe networks using age as a quality surrogate and different levels of redundancy.” World Water and Environmental Resources Congress 2001, ASCE, Reston, VA.
Ekinci, Ö., and Konak, H. (2009). “An optimization strategy for water distribution networks.” Water Resour. Manage., 23(1), 169–185.
Fang, H., Zhang, J., and Gao, J. (2010). “Optimal operation of multi-storage tank multi-source system based on storage policy.” J. Zhejiang Univ.-Sci. A, 11(8), 571–579.
Farmani, R., Savic, D. A., and Walters, G. A. (2004). “The simultaneous multi-objective optimization of Anytown pipe rehabilitation, tank sizing, tank siting and pump operation schedules.” 2004 World Water and Environmental Resources Congress: Critical Transitions in Water and Environmental Resources Management, June 27, 2004–July 1, 2004, ASME, Salt Lake City, UT.
Farmani, R., Walters, G., and Savic, D. (2006). “Evolutionary multi-objective optimization of the design and operation of water distribution network: Total cost vs. reliability vs. water quality.” J. Hydroinf., 8(3), 165–179.
Farmani, R., Walters, G. A., and Savic, D. (2005). “Trade-off between total cost and reliability for Anytown water distribution network.” J. Water Resour. Plann. Manage., 161–171.
Filion, Y. R. (2008). “Single-objective deterministic versus multi-objective stochastic water network design: Practical considerations for the water industry.” Proc., Institution of Mechanical Engineers, Part O (Journal of Risk and Reliability), 222, Institution of Engineering and Technology, U.K., 655–665.
Fire Underwriters Survey. (1999). Water supply for public fire protection, CGI Risk Management Services, Markham, ON, Canada.
Fujiwara, O. (1990). “A two-phase decomposition method for optimal design of looped water distribution networks.” Water Resour. Res., 26(4), 539–549.
Ghimire, S. R., and Barkdoll, B. D. (2010). “Sensitivity analysis of municipal drinking water distribution system energy use to system properties.” Urban Water J., 7(4), 217–232.
Guistolisi, O., Laucelli, D., and Colombo, A. (2009). “Deterministic versus stochastic design of water distribution networks.” J. Water Resour. Plann. Manage., 117–127.
Hodnett, R. M. (1981). “Water storage facilities and suction supplies.” Fire protection handbook, National Fire Protection Association, Quincy, MA.
Homwongs, C., Sastri, T., and Foster, J. W., III (1994). “Adaptive forecasting of hourly municipal water consumption.” J. Water Resour. Plann. Manage., 888–904.
International Water Supply Association (IWSA). (1955). “Subject No. 3: Design and construction of service reservoirs and water towers.” Proc., 3rd Congress, Keliher, Hudson & Kearns, London, U.K.
Klempous, R., Kotowski, J., and Ulasiewicz, J. (1997). “Optimization algorithms of operative control in water distribution systems.” J. Comput. Appl. Math., 84(1), 81–99.
Kretzmann, H. A., and Van Zyl, J. E. (2004). “Stochastic analysis of water distribution systems.” 2004 World Water and Environmental Resources Congress: Critical Transitions in Water and Environmental Resources Management, June 27, 2004–July 1, 2004, ASME, Salt Lake City, UT.
Mays, L. W. (2000). Water distribution systems handbook, McGraw-Hill, New York.
McPherson, M. B. (1966). “Ground storage booster pumping hydraulics.” J. Am. Water Works Assn., 58(3), 311–325.
Ministère du Développement Durable, de l’Environnement et des Parcs (MDDEP). (2006). Guide de conception des installations de protection d’eau potable, Vol. 1, Gouvernement du Québec, Canada (in French).
Murphy, L. J., Dandy, G. C., and Simpson, A. R. (1994). “Optimum design and operation of pumped water distribution-systems.” 1994 Int. Conf. on Hydraulics in Civil Engineering—Hydraulics Working with the Environment, Preprints of Papers 94, The Institution of Engineers, UAustralia, 149–155.
Nel, D., and Haarhoff, J. (1996). “Sizing municipal water storage tanks with Monte Carlo simulation.” J. Water Supply Res. Technol. AQUA, 45(4), 203–212.
Oliveira Sousa, J. J., Conceicao Cunha, M., and Almeida Sa Marques, J. A. (2005). “Simulated annealing reaches Anytown.” Proc., 8th Int. Conf. CCWI05, Water Management for the 21st Century, Vol. 2, Univ. of Exeter, Exeter, U.K., 69–74.
Ostfeld, A. (2005). “Optimal design and operation of multiquality networks under unsteady conditions.” J. Water Resour. Plann. Manage., 116–124.
Piqueiro, F., Tentugal-Valente, J., and Tomas, M. T. (1991). Considerations about the storage capacity in water supply systems (influence of network consumption law and pumping station operation in its optimization), Computational Mechanics Publications, Southampton, U.K., 171–183.
Prasad, T. D. (2004). “Multiobjective genetic algorithms for design of water distribution networks.” J. Water Resour. Plann. Manage., 73–82.
Prasad, T. D. (2007). “Design of Anytown network with improved tank sizing methodology.” Combined Int. Conf. of Computing and Control for the Water Industry CCWI2007 and Sustainable Urban Water Management SUWM2007, September 3, 2007–September 5, 2007, Taylor and Francis/Balkema, Leiden, Netherlands.
Prasad, T. D. (2010). “Design of pumped water distribution networks with storage.” J. Water Resour. Plann. Manage., 129–132.
Quindry, G., Brill, E., Jr., and Robinson, A., Jr. (1979). “Comment on design of optimal water distribution systems by E. Alperovits and U. Shamir.” Water Resour. Res., 15(6), 1651–1654.
Quindry, G., Liebman, J., and Brill, E., Jr. (1981). “Optimization of looped water distribution systems.” J. Env. Eng. Div., 107(4), 665–679.
Reca, J., and Martínez, J. (2006). “Genetic algorithms for the design of looped irrigation water distribution networks.” Water Resour. Res., 42(5), W05416.
Savic, D. (2002). “Single-objective vs. multiobjective optimisation for integrated decision support.” Proc., First Biennial Meeting of the Int. Environmental Modelling and Software Society, Int. Environmental Modelling and Software Society (IEMSs), Lugano, Switzerland, 7–12.
Savic, D., Kapelan, Z., Farmani, R., and Giustolisi, O. (2008). “Optimal design and management of water distribution systems.” Int. J. Numer. Model. Electron. Network Dev. Field., 25–45.
Savic, D., and Walters, G. (1997). “Genetic algorithms for least-cost design of water distribution networks.” J. Water Resour. Plann. Manage., 67–77.
Sherali, H. D., Totlani, R., Loganathan, G. V. (1998). “Enhanced lower bounds for the global optimization of water distribution networks.” Water Resour. Res., 34(7), 1831–1841.
Shu-li, Y., Nien-Sheng, H., Louie, P., and Yeh, W. (1996). “Water distribution network reliability: Connectivity analysis.” J. Infrastruct. Sys., https://doi.org/10.1061/(ASCE)1076-0342(1996)2:2(54), 54–64.
Todini, E. (2000). “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water, 2(2), 115–122.
Vamvakeridou-Lyroudia, L. S., Savic, D. A., and Walters, G. A. (2007). “Tank simulation for the optimization of water distribution networks.” J. Hydraul. Eng., 625–636.
Vamvakeridou-Lyroudia, L. S., Walters, G. A., and Savic, D. A. (2005). “Fuzzy multiobjective optimization of water distribution networks.” J. Water Resour. Plann. Manage., 467–476.
van Zyl, J. E., and Haarhoff, J. (1997). “South African fire water guidelines and their impact on water supply system cost.” J. South Afr. Inst. Civil Eng., 39(1), 49–53.
van Zyl, J. E., le Gat, Y., Piller, O., and Walski, T. (2012). “Impact of water demand parameters on the reliability of municipal storage tanks.” J. Water Resour. Plann. Manage., https://doi.org/10.1061/(ASCE)WR.1943-5452.0000200, 553–561.
van Zyl, J. E., Piller, O., and le Gat, Y. (2008a). “Sizing municipal storage tanks based on reliability criteria.” J. Water Resour. Plann. Manage., 548–555.
van Zyl, J. E., Piller, O., and le Gat, Y. (2008b). “Critical parameters for the reliability of municipal storage tanks.” World Environmental and Water Resources Congress 2008: Ahupua’a, May 12, 2008–May 16, 2008, ASCE, Reston, VA.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: Simulation methods.” J. Water Resour. Plann. Manage., 276–294.
Walski, T. (2001). “The wrong paradigm-Why water distribution optimization doesn’t work.” J. Water Resour. Plann. Manage., 203–205.
Walski, T. M. (1995). “Optimization and pipe-sizing decisions.” J. Water Resour. Plann. Manage., 340–343.
Walski, T. M. (2000). “Hydraulic design of water distribution storage tanks.” Water distribution systems handbook, L. Mays, ed., 10.11–10.20.
Walski, T. M., et al. (1987). “Battle of the network models: Epilogue.” J. Water Resour. Plann. Manage., 191–203.
Walters, G. A., Halhal, D., Savic, D., and Ouazar, D. (1999). “Improved design of ‘Anytown’ distribution network using structured messy genetic algorithms.” Urban Water, 1, 23–28.
Wu, Z. Y., Walski, T. M., Naumick, G., Dugandzic, J., and Nasuti, R. (2005). “Optimizing water system improvement for a growing community.” Int. Conf. of Computing and Control in the Water Industry, September 5–7, Univ. of Exeter, Exeter, U.K.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 28, 2011
Accepted: Jul 26, 2012
Published online: Aug 15, 2012
Discussion open until: Jan 15, 2013
Published in print: Feb 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.