Battle of the Water Calibration Networks
Publication: Journal of Water Resources Planning and Management
Volume 138, Issue 5
Abstract
Calibration is a process of comparing model results with field data and making the appropriate adjustments so that both results agree. Calibration methods can involve formal optimization methods or manual methods in which the modeler informally examines alternative model parameters. The development of a calibration framework typically involves the following: (1) definition of the model variables, coefficients, and equations; (2) selection of an objective function to measure the quality of the calibration; (3) selection of the set of data to be used for the calibration process; and (4) selection of an optimization/manual scheme for altering the coefficient values in the direction of reducing the objective function. Hydraulic calibration usually involves the modification of system demands, fine-tuning the roughness values of pipes, altering pump operation characteristics, and adjusting other model attributes that affect simulation results, in particular those that have significant uncertainty associated with their values. From the previous steps, it is clear that model calibration is neither unique nor a straightforward technical task. The success of a calibration process depends on the modeler’s experience and intuition, as well as on the mathematical model and procedures adopted for the calibration process. This paper provides a summary of the Battle of the Water Calibration Networks (BWCN), the goal of which was to objectively compare the solutions of different approaches to the calibration of water distribution systems through application to a real water distribution system. Fourteen teams from academia, water utilities, and private consultants participated. The BWCN outcomes were presented and assessed at the 12th Water Distribution Systems Analysis conference in Tucson, Arizona, in September 2010. This manuscript summarizes the BWCN exercise and suggests future research directions for the calibration of water distribution systems.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alvisi, S., and Franchini, M. (2010). “Calibration and sensitivity analysis of the C-Town pipe network model.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Asadzadeh, M., and Tolson, B. A. (2009). “A new multi-objective algorithm, Pareto archived DDS.” Proc., 11th Annual Conf. Companion on Genetic and Evolutionary Computation Conf.: Late Breaking Papers (GECCO’09) Association for Computing Machinery (ACM), New York, 1963–1966.
Asadzadeh, M., Tolson, B. A., and McKillop, R. (2010). “A two stage optimization approach for calibrating water distribution systems.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A. Pepper, I., eds., ASCE, Reston, VA.
Bros, M., and Kalungi, P. (2010). “Battle of the water calibration networks-MWH UK.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Burd, R., Zazula-Coetzee, B., and Belrain, T. (2010). “Battle of the water calibration networks (BWCN).” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Carpentier, P., and Cohen, G. (1993). “Applied mathematics in water supply network management.” Autom.: J. Int. Fed. Autom. Control, 29(5), 1215–1250.
Chang, K., Gao, J., Qu, S., and Yuan, Y. (2010). “Research on water distribution network calibration using heuristics algorithm and pipeline resistance coefficient empirical model.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Diao, K., Zhou, Y., Li, J., and Liu, Z. (2010). “A component status changes oriented calibration method for zonal management water distribution networks.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Duan, Q., Sorooshian, S., and Gupta, V. K. (1992). “Effective and efficient global optimization for conceptual rainfall runoff models.” Water Resour. Res., 28(4), 1015–1031.
Geem, Z. W., Kim, J. H., and Loganathan, G. V. (2001). “A new heuristic optimization algorithm: Harmony search.” Simulation, 76(2), 60–68.
Giustolisi, O., and Berardi, L. (2011). “Water distribution network calibration using enhanced GGA and topological analysis.” J. Hydroinf., 13(4), 621–641.
Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Addison Wesley, Reading, MA.
Johnson, J. P., Ghimire, S. R., and Barkdoll, B. D. (2010). “Flow-sequential sector-specific lumped algorithm for water network calibration.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Kang, D., and Lansey, K. (2010). “The battle of the water calibration networks (BWCN): Roughness and demand estimation based on weighted least squares (WLS) method.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Kapelan, Z. (2010). Calibration of water distribution system hydraulic models, LAP Lambert Academic Publishing, Saarbrücken, Germany, 284.
Kapelan, Z., Savic, D. A., and Walters, G. A. (2007). “Calibration of water distribution hydraulic models using a Bayesian-type procedure.” J. Hydraul. Eng., 133(8), 927–936.
Kim, J. H., Chung, G., and Yoo, D. G. (2010). “Calibration of C-Town network using harmony search algorithm.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Koppel, T., and Vassiljev, A. (2009). “Calibration of a model of an operational water distribution system containing pipes of different age.” Adv. Eng. Software, 40(8), 659–664.
Koppel, T., and Vassiljev, A. (2010). “Calibration of water distribution network for BWCN.” Proc. Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Laucelli, D. et al. (2010). “Calibration of water distribution system using topological analysis.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Levenberg, K. (1944). “A method for the solution of certain non-linear problems in least squares.” Q. Appl. Math., 2, 164–168.
Marquardt, D. W. (1963). “An algorithm for least-squares estimation of nonlinear parameters.” J. Soc. Ind. Appl. Math. Control, 11(2), 431–441.
McKay, M. D., Conover, W. J., and Beckman, R. J. (1979). “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics, 211, 239–245.
Ormsbee, L. E., and Lingireddy, S. (1997). “Calibrating hydraulic network models.” J. Am. Water Works Assoc., 89(2), 42–50.
Ostfeld, A. et al. (2008). “The Battle of the Water Sensor Networks: A design challenge for engineers and algorithms.” J. Water Resour. Plann. Manage., 134(6), 556–568.
Ozawa, T. (1987). “The principal partition of a pair of graphs and its applications.” Discrete Appl. Math., 17 (1–2), 163–186.
Perelman, L., and Ostfeld, A. (2008). “Water distribution system aggregation for water quality analysis.” J. Water Resour. Plann. Manage., 134(3), 303–309.
Prasad, T. D. (2010). “A clonal selection algorithm for the C-Town network calibration.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C. Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Savic, D. A., Kapelan, Z. S., and Jonkergouw, P. M. R. (2009). “Quo vadis water distribution model calibration?” Urban Water J., 6(1), 3–22.
Shen, H., and McBean, E. (2010). “Hydraulic calibration for a small water distribution network.” Proc., 12th Water Distribution Systems Analysis Symp., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Tolson, B. A., and Shoemaker, C. A. (2007). “Dynamically dimensioned search algorithm for computationally efficient watershed model calibration.” Water Resour. Res., 43(1), W01413.
Ulanicki, B., Zehnpfund, A., and Martinez, F. (1996). “Simplification of water distribution network models.” Proc., 2nd Int. Conf. on Hydroinformatics, International Water Association, Zurich, Switzerland, 493–500.
U.S. EPA. (2002). “EPANET.” 〈http://www.epa.gov/ORD/NRMRL/wswrd/epanet.html〉 (Mar. 13, 2011).
Walski, T. M. (1990). “Sherlock Holmes meets Hardy Cross or model calibration in Austin, Texas.” J. Am. Water Works Assoc., 82(3), 34–38.
Walski, T. M. et al. (1987). “Battle of the network models: Epilogue.” J. Water Resour. Plann. Manage., 113(2), 191–203.https://doi.org/10.1061/(ASCE)0733-9496(1987)113:2(191)
Whittemore, R. (2001). “Is the time right for consensus on model calibration guidance?” J. Environ. Eng., 127(2), 95–96.
Wu, Z. Y., and Walski, T. (2010). “Progressive optimization approach for calibrating EPS hydraulic models.” Proc., 12th Water Distribution Systems Analysis Sym., Lansey, K., Choi, C., Ostfeld, A., and Pepper, I., eds., ASCE, Reston, VA.
Information & Authors
Information
Published In
Journal of Water Resources Planning and Management
Volume 138 • Issue 5 • September 2012
Pages: 523 - 532
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Apr 27, 2011
Accepted: Aug 17, 2011
Published online: Aug 19, 2011
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.