Model of Potential Crash Rates of Rural Roundabouts with Geometrical Features
Publication: Journal of Transportation Engineering
Volume 140, Issue 11
Abstract
In recent years, there has been a widespread diffusion of roundabout intersections in the Italian road network; their undoubted popularity is attributable not only to their proven performance in terms of safety but also to their guarantee of smooth traffic flow. However, safety-related requirements of geometric designs are occasionally placed in a subordinate position; therefore, the success achieved by some foreign experiences has not been reached in every area. A model of potential crash rates may indicate how to modify the geometry of intersections to ensure safety. With regard to this, an example model based on the conflict opportunity technique has been developed for estimating crash rates at rural roundabouts. The model appears to respond well to traffic conditions and the geometry of roundabouts. Development of the model and results are described and analyzed in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2010). Highway safety manual, Washington, DC.
Archer, J. (2001). “Traffic conflict technique: Historical to current state-of-the-art.”, Institutionen för Infrastruktur KTH, School of Architecture and the Built Environment Royal Institute of Technology (KTH), Stockholm, Sweden.
Brilon, W., Wu, N., and Bondzio, L. (1997). “Unsignalized intersection in Germany. A state of the art.” Proc., 3rd Int. Symp. on Intersections without Traffic Signals, Transportation Research Board, Washington, DC.
Daniels, S., Brijs, T., Nuyts, E., and Wets, G. (2010). “Explaining variation in safety performance of roundabouts.” Accid. Anal. Prev., 42(2), 393–402.
Desmond, P. A., and Hancock, P. A. (2001). “Active and passive fatigue states.” Stress, workload, and fatigue, P. A. Hancock and P. A. Desmond, eds., Lawrence Erlbaum Associates, Mahwah, NJ, 455–465.
Dowling, R., et al. (2008). “Multimodal level of service analysis for urban streets.”, National Cooperative Highway Research Program, Transportation Research Board, Washington, DC.
Elvik, R. (2003). “Effects on road safety of converting intersections to roundabouts: A review of evidence from non-US studies.”, Transportation Research Board, Washington, DC, 1–10.
Federal Highway Administration. (2008). “Surrogate safety assessment model.” Rep. FHWA HRT 2008 051, Technical Summary, Federal Highway Administration, Washington, DC.
Florida Department of Transportation. (2001). Florida roundabout guide, Tallahassee, FL.
Guichet, B. (1993). “Typologie des accidents dans les giratoiresurbains.” Seminaire Giratoires 92, Service d’Etudes Techniques des Routes et Autoroutes, Centred’Etudes Techniques des Transports Urbains, Centre d’etudes et d’expertise sur les risques, l’environment, la mobilité et l’aménagement (CEREMA), Ministère de l'écologie, du développement durable et de l'énergie, Bagneux, France (in French).
Highway Agency. (2007). “Geometric design of roundabouts.” Design manual of roads and bridges, Vol. 6, London.
Hillary, I. (2011). “Quantifying safety and speed data for rural roundabouts with high-speed approaches.” Graduate thesis, Iowa State University, Ames, IA.
Institute of Transportation Engineering (ITE). (1999). Traffic calming: State of the practice, ITE, Washington, DC.
Kaub, A. R. (2005). “Interactive intersection safety design and the Traf-Safe annual accident prediction model.” TRB Circular E C019: Urban Street Symp., Transportation Research Board (TRB), Washington, DC.
Kennedy, J. V. (2005). “Review of accident research at roundabouts.” 2005 Proc., Roundabout National Conf, Transportation Research Board, Washington, DC.
Lakkundi, V. R. (2008). “Development of left-turn lane guidelines for signalized and unsignalized intersections.”, Federal Highway Administration, Washington, DC.
Mauro, R. (2010). Calculation of Roundabouts. Capacity, waiting phenomena and reliability, Springer, New York.
Mauro, R., and Cattani, M. (2004). “Model to evaluate potential accident rate at Roundabouts.” J. Transp. Eng., 130(5), 602–609.
Mauro, R., and Cattani, M. (2005). “A model to evaluate the potential accident rate at single-lane and double-lane roundabouts.” Road Safety on Four Continents, Int. Conf, Swedish National Road and Transport Research Institute, Statens väg-och transportforskningsinstitut (VTI), Linköping, Sweden.
Mauro, R., and Cattani, M. (2010). “Potential accident rate of turbo-roundabouts.” 4th Int. Symp. on Highway Geometric Design, Transportation Research Board, Washington, DC.
Ming, S. H. (2008). “Conflict Opportunities: Prevision models.” Thesis, Polytechnic School of the Univ. of São Paulo, Saint Paul, Brazil.
Ministero delle Infrastrutture e dei Trasporti. (2001). “Geometrical and functional standards for road design.”, Roma, Italy.
Ministero delle Infrastrutture e dei Trasporti. (2006). “Geometrical and functional standards for design of road intersections.”, Roma, Italy.
Montella, A. (2011). “Identifying crash contributory factors at urban roundabouts and using association rules to explore their relationships to different crash types.” Accid. Anal. Prev., 43(4), 1451–1463.
Ray, B., et al. (2008). “Guidelines for selection of speed reduction treatments at high-speed intersections.”, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, DC.
Renčelj, M. (2009). “The methodology for predicting the expected level of traffic safety in the different types of level intersections.” Doctoral thesis, Università degli Studi di Trieste, Trieste, Italy.
Rodegerdts, L., et al. (2010). “Roundabouts: An informational guide. Second Edition.”, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, DC.
Schweitzer, J., and Green, A. P. (2007). “Task acceptability and workload of driving city streets, rural roads, and expressways: Ratings from video clips.”, University of Michigan, Transportation Research Institute, Ann Arbor, MI.
Service d’Etudes Techniques des Routes et Autoroutes (SETRA). (1998). “The design of interurbans intersection, at grade intersections.” Technical guides, Chapter 3: Rural roundabout intersection, SETRA, Centre d’etudes et d’expertise sur les risques, l’environment, la mobilité et l’aménagement (CEREMA), Ministère de l'écologie, du développement durable et de l'énergie, Paris, France.
Spacek, P. (2004). “Basis of the Swiss design standard for roundabouts.”, Transportation Research Board, National Research Council, Washington, DC, 27–35.
Svensson, A. (1992). Further development and validation of the Swedish traffic conflicts techniques, Department of Traffic Planning and Engineering, Lund University, Lund, Sweden.
Traffic Flow Data Supplied by Provincia di Mantova (2011). “Service of safe and sustainable mobility.” Mantova, Italy.
Transportation Research Board (TRB). (2010). Highway capacity manual, TRB, National Research Council, Washington, DC.
Turner, S. A., Roozenburg, A. P., and Smith, A. W. (2009). “Roundabout crash prediction models.”, New Zealand Transport Agency, Wellington, New Zealand.
VSS Swiss Association of Road and Transportation Experts (VSS-Norm). (2000). “Knoten, Knoten mit Kreisverkehr.”, Zürich, Switzerland (in German).
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 21, 2013
Accepted: Apr 23, 2014
Published online: Jul 7, 2014
Published in print: Nov 1, 2014
Discussion open until: Dec 7, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.